Rif. 155S Ergon Living Folding Instruction Manual

June 17, 2024
ERGON

Rif. 155S Ergon Living Folding

Rif-155S-Ergon-Living-Folding-PRODUCT-IMAGE

Specifications :

  • Door leaf thickness : 1 19/32″ to 2 3/16″
  • Single leaf weight limit : 154 lbs
  • Weight limit for folding door leaves : 110 lbs per door leaf

Product Information

Ergon Living FOLDING is an innovative system that allows the roto translating movement of multiple door leaves connected to each other. The movement is achieved by moving only the outermost door leaf, providing a fluid and stable operation. The system features an aluminum frame with special adjustments for correct installation.

Installation Instructions:

  1. Refer to the provided Calculator on www.celegon.it for measurements and fittings guidance.
  2. Ensure the door leaf thickness falls within the specified range.
  3. For single folding opening with 2 door leaves, ensure the Wall Hole Width is a minimum of 49-10/32 inches.
  4. For double opening with single + folding doors, the Wall Hole Width should be a minimum of 75 7/32 inches.
  5. For double folding opening with 2 door leaves, the Wall Hole Width should be a minimum of 90 9/16 inches.

Parts List:

  • Carriage for single door leaf Rif. 155S
  • Carriage for 1 folding door leaf Rif. 155F1

Accessories:

  • Folding hinges specially designed for the Folding system
  • Soft Opening S1 damper for single door leaf
  • Soft Opening Plus damper for Folding door leaves

FAQ:

  1. Q: What is the weight limit for each folding door leaf?
    A: The weight limit for each folding door leaf is 110 lbs.

  2. Q: Where can I find instructions for installing the whole system?
    A: Detailed installation instructions can be found on www.celegon.it along with video animations for correct installation.

TECHNICAL MANUAL
CONSTRUCTION AND INSTALLATION Swinging sliding Folding pivot door with adjustable external frame
Up to 6 door leavesRif-155S-Ergon-Living-Folding-
\(1\)

INTRODUCTION

  • Ergon Living FOLDING is an evolution of the Ergon Living Т.Е. system, it allows the rototranslating movement of several door leaves connected to each other Ьу moving only the outermost door leaf, it has nо floor guides and the movement is fluid and staЫe.
  • The system features an aluminum frame equipped with special adjustments to ensure correct installation

TECHNICAL FEATURES

  • Door leaf thickness from 1 19/32″ to 2 3/16″
  • Single leaf weight limit: 154 lbs
  • Weight limit for folding door leaves : 110 lbs per door leaf
  • Саn Ье installed directly оп the ceiling (see page 5) or оп а false ceiling (see page 6)

DOWNLOAD ON www.celegon.it:

  • Calculator for developing measurements and fittings : enter the wall opening width and height measurements, enter with or without false ceiling, select the desired fitting.
  • Video animation for the correct installation of the whole system.

PART LIST

Rif-155S-Ergon-Living-Folding- \(3\) Rif-155S-Ergon-
Living-Folding- \(4\) Rif-155S-Ergon-Living-Folding-
\(5\)

ACCESSORIES

FOLDING HINGES: assemЫaЫe and specially designed for the Folding system

Item code:

  • C701000F1 BLACK

  • C721000F1 STAINLESS

  • SOFT OPENING S1 : damper for single door leaf

  • SOFT OPENING PLUS: damper for Folding door leavesRif-155S-Ergon-Living-Folding- \(7\)

  • BALLOON GASKET 09/32″: see pag. 21 “leaf processing specifications for gasket”

  • item code:
    GS680— (see price list)

  • Push &Go EVO: Quick release system for Folding door leaves

  • stem code Push: 4100– (see price list) Rif-155S-Ergon-Living-Folding- \(9\)

EQUIPMENTS

Rif-155S-Ergon-Living-Folding- \(10\) Rif-155S-
Ergon-Living-Folding- \(11\) Rif-155S-Ergon-Living-Folding-
\(12\)

Use the calculator to get all the measurements you need For other setups, ask Celegon S.r.l. for feasiЬility.

HORIZONT AL SECTIONS

Rif-155S-Ergon-Living-Folding- \(13\) Rif-155S-
Ergon-Living-Folding- \(14\) Rif-155S-Ergon-Living-Folding-
\(15\)

LEGEND FOR DIMENSIONAL DRAWINGS

  • LFM = WALL HOLE WIDTH
  • LP = PASSAGE DIMENSION
  • LPD = DOUBLE PASSAGE DIMENSION
  • LS = DOOR JAMB OPENING
  • LA 1 = SINGLE DOOR WIDTH
  • LA2 = DOOR WIDTH WITH TWO CONSECUTIVE DOOR LEAVES
  • LАЗ = DOOR WIDTH WITH THREE CONSECUTIVE DOOR LEAVES
  • LA4 = DOOR WIDTH WITH FOUR CONSECUТIVE DOOR LEAVES
  • LA5 = DOOR WIDTH WITH FIVE CONSECUTIVE DOOR LEAVES
  • QF = QC = FIXED DIMENSION ENCUMBRANCE ARM-SIDE = CARRIAGE DIMENSION (391,3)
  • QV = VARIABLE DIMENSION ENCUMBRANCE HANDLE-SIDE
  • НР = PASSAGE HEIGHT DIMENSION
  • НА = DOOR LEAF HEIGHT
  • HFM = WALL HOLE HEIGHT
  • НС = FALSE CEILING HEIGHT

HORIZONTAL DIMENSIONAL DRAWINGS – EQUIPMENTS WITH 2 DOOR LEAVES

EQUIPMENT “А”

Rif-155S-Ergon-Living-Folding- \(16\) Rif-155S-
Ergon-Living-Folding- \(17\) Rif-155S-Ergon-Living-Folding-
\(18\) Rif-155S-Ergon-Living-Folding- \(19\)

QUIPMENT “D”

Rif-155S-Ergon-Living-Folding- \(20\) Rif-155S-
Ergon-Living-Folding- \(21\) Rif-155S-Ergon-Living-Folding-
\(22\) Rif-155S-Ergon-Living-Folding- \(23\)

EQUIPMENT “Н”

Rif-155S-Ergon-Living-Folding- \(24\)

EQUIPMENT “F”

Rif-155S-Ergon-Living-Folding- \(25\)

EQUIPMENT “I”

Rif-155S-Ergon-Living-Folding- \(26\)

EQUIPMENT “L”

Rif-155S-Ergon-Living-Folding- \(27\)

EQUIPMENT “G”

Rif-155S-Ergon-Living-Folding- \(28\) Rif-155S-
Ergon-Living-Folding- \(29\)

EQUIPMENT “М” Rif-155S-Ergon-Living-Folding-
\(30\)

VERTICAL CEILING SECTIONS

Rif-155S-Ergon-Living-Folding- \(31\) Rif-155S-
Ergon-Living-Folding- \(32\)

VERTICAL DIMENSIONAL DRAWINGS ON THE CEILING

Rif-155S-Ergon-Living-Folding- \(33\)

HP=HFM-2 31/32″ HA= HFM-3 5/8″

  • When ordering the rod kit, the wall opening size (HFM) must be provided. According to the communicated dimensions will be supplied a customised rod kit
  • Max size HFM 123 1/32″
  • Max size HP 120 3/32″
  • For larger sizes, ask Celegon S.r.l. for feasibility.

VERTICAL SECTION ON FALSE CEILING

Rif-155S-Ergon-Living-Folding- \(34\) Rif-155S-
Ergon-Living-Folding- \(35\)

VERTICAL DIMENSIONAL DRAWINGS ON THE FALSE CEILING

PROCESSING POSITION ACCORDING TO THE EQUIPMENT “A; D; H; L”
Single openings: Folding

Rif-155S-Ergon-Living-Folding- \(37\) Rif-155S-
Ergon-Living-Folding- \(38\) Rif-155S-Ergon-Living-Folding-
\(39\) Rif-155S-Ergon-Living-Folding- \(40\) Rif-155S-
Ergon-Living-Folding- \(41\) Rif-155S-Ergon-Living-Folding-
\(42\) Rif-155S-Ergon-Living-Folding- \(43\) Rif-155S-
Ergon-Living-Folding- \(44\) Rif-155S-Ergon-Living-Folding-
\(45\) Rif-155S-Ergon-Living-Folding- \(46\) Rif-155S-
Ergon-Living-Folding- \(47\)

155S and 155F1 PLATE PROCESSING SPECIFICATIONS

Rif-155S-Ergon-Living-Folding- \(48\) Rif-155S-
Ergon-Living-Folding- \(49\) Rif-155S-Ergon-Living-Folding-
\(50\)

155F2 and 155F3 PLATE PROCESSING SPECIFICATIONS

Rif-155S-Ergon-Living-Folding- \(51\) Rif-155S-
Ergon-Living-Folding- \(52\)

DOOR LEAF PROCESSING SPECIFICATIONS FOR THE GASKET

Rif-155S-Ergon-Living-Folding- \(53\) Rif-155S-
Ergon-Living-Folding- \(54\)

EXPLODED VIEW OF HINGES KIT

Rif-155S-Ergon-Living-Folding- \(55\) Rif-155S-
Ergon-Living-Folding- \(56\)

POSITIONING HINGES

Rif-155S-Ergon-Living-Folding- \(57\) Rif-155S-
Ergon-Living-Folding- \(58\)

DOOR LEAVES PROCESSING

Rif-155S-Ergon-Living-Folding- \(59\) Rif-155S-
Ergon-Living-Folding- \(60\)

HINGES ASSEMBL У

For door leaves with а thickness Ьigger than 1 31/32″, а processing must Ье carried out as shown in the drawing below, which is useful for inserting the screw (426)

Rif-155S-Ergon-Living-Folding- \(61\)

Separate the hinge Ьу completely unscrewing the joining screw (426), fix the single elements оп the top and оп the bottom of the door leaves

Rif-155S-Ergon-Living-Folding- \(62\)

After hanging the doors оп the track, put the doors together and join them using the joining screw (426), making sure that the brass bearing and the plastic washer аге present

Rif-155S-Ergon-Living-Folding- \(63\)

FOLDING DOOR LEAF LOCKING OPTIONS

Push &Go EVO (advised) 

Rif-155S-Ergon-Living-Folding- \(64\) Rif-155S-
Ergon-Living-Folding- \(65\)

“SOFT OPENING S1” INSTALLATION

Rif-155S-Ergon-Living-Folding- \(66\) Rif-155S-
Ergon-Living-Folding- \(67\)

  1. Push hook (A) to set the Soft Opening (410S).
    Mount Soft Opening unit using the screw provided (404).

  2. Verify that the Soft Opening system functions properly. Finish installing door.

Rif-155S-Ergon-Living-Folding- \(68\)

“SOFT OPENING PLUS” INSTALLATION

Rif-155S-Ergon-Living-Folding- \(69\)

  1. Push hook (A) to set the Soft Opening (410F).
    Mount Soft Opening unit using the screw provided (404).

  2. Verify that the Soft Opening system functions properly. Finish installing door.

MILCASA STORE
CELEGON
SMART OPENING SYSТEMS

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals