SENIX Tools CHX2 Battery Charger User Manual

SENIX Tools CHX2 Battery Charger

Product Information

Specifications

• Model: CHX2
• Rated Input Voltage: 120V
• Input frequency: 50-60Hz
• Rated Input Power: 50W
• Compatible With Battery:
  • Model: B25X2 20 Max Lithium Ion 2.5Ah, 45Wh
  • Model: B50X2 20 Max Lithium Ion 5.0Ah, 90Wh
• Input Frequency: 50Hz/60Hz
• Output Voltage: 21V. DC
• Output Current: 2A
• Weight: 0.75 lbs

Product Usage Instructions

Safety Instructions
Read all warnings and instructions before use to prevent electric shock, fire, or injury. Save all warnings and instructions for future reference.

Charging Instructions

1. Ensure the charger is used indoors only and not exposed to wet conditions.
2. Use the charger with compatible X2 battery packs only.
3. Do not charge non-rechargeable batteries with this charger.
4. Check the voltage specified on the charger’s nameplate before charging.

Operation Instructions
Avoid using the charger outdoors or in damp conditions to prevent electric shock. Ensure adequate ventilation during charging to prevent explosive gases.

How to Use the Charger
The charger can be operated in two positions:

1. Horizontal: Place the charger on a stable table horizontally.
2. Vertical: Install two nails on a wall to mount the charger vertically.

Frequently Asked Questions (FAQ)

• What type of batteries can be charged with this charger?
  The charger is designed to charge Li-Ion batteries. Non-rechargeable batteries should not be charged with this charger.

• Can I leave the equipment unattended while it is operating?
  No, it is advised not to leave the equipment unattended while operating to avoid risks of fire, burns, and electric shocks.

SAFETY & INTERNATIONAL SYMBOLS

Explanation of Safety & international symbols describes safety and international symbols and pictographs that may appear on this product. Read the operator’s manual for complete safety, assembly, operating and maintenance and repair information.

SAFETY INSTRUCTIONS
WARNING! Read all warnings and instructions. Failure to follow the warnings and instructions can cause electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

1. SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for battery charger.
2. Before using battery charger, read all instructions and cautionary markings on battery charger and battery.
3. The appliance is designed to charge Li-Ion batteries.
4. Non- rechargeable batteries cannot be charged with this battery charger.
5. Use a power source with the voltage specified on the nameplate of the charger.
6. Do not charge the battery in presence of flammable liquids or gases.
7. Do not expose charger to rain or snow.
8. Never carry charger by cord or yank it to disconnect from receptacle.
9. After charging or before attempting any maintenance or cleaning, unplug the charger from the power source. Pull by plug other than cord whenever disconnecting charger.
10. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
11. Do not operate charger with damaged cord or plug – replace them immediately.
12. Do not operate or disassemble charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. Incorrect use or reassembly may result in a risk of electric shock or fire.
13. The battery charger is not intended for young children or infirm persons without supervision.
14. Young children should be supervised to ensure that they do not play with the battery charger.
15. Do not charge battery when temperature is below 32°CF(0°C) or above 104°F(40°C).
16. Do not attempt to use a step-up transformer, an engine generator or DC power receptacle.
17. During charging, the battery must be placed in a well ventilated area. Keep the working area tidy to reduce the risk of fire, electric shock and explosion. Do not cover the charger and battery pack with a cloth while charging.
18. When the appliance is not in use and before cleaning, unplug the appliance from the outlet.
19. Indoor use only.
20. To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid.

Other warnings:

1. The charger must not be used for non-rechargeable, ordinary batteries.
2. Adequate ventilation is required.
3. The information on current and voltage on the battery pack must comply with those of the charger.
4. Do not expose the charger to water splashes and rain.
5. Disconnect the equipment from the power supply before inserting or removing the batteries.
6. Do not throw exhausted or damaged batteries into water or fire. Environmental guidelines must be followed.
7. A defective or not chargeable battery must be treated as special waste / hazardous waste. Put it in a special collection point. Do not throw it in the normal household waste neither into water or fire.
8. Place the charger far from any heat source.
9. To reduce the risk of electric shock, pull the plug instead of the power cord out from the socket, if you want to disconnect the charger from the mains.
10. Do not disassemble the charger. Bring it to an authorized repair service, if service or repair is required. Improper installation can result in electrical shock, death and fire.
11. This equipment is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.
12. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
13. Do not leave the equipment unattended while it is operating, to avoid the risk of fire, burns and electric shocks.
14. If the power cord is damaged, it must be replaced by the manufacturer or its customer service or a similarly qualified person in order to avoid hazards.

INTENDED USE
Thank you for purchasing this product. Please read through these operating instructions and keep them for future reference. Use this battery charger for X2 battery pack only. If the product is damaged or has any defect, please do not use it and bring back it to your dealer. If you give this tool to another people, please give him also this instruction manual. Please note that our equipment has not been designed for use in commercial, trade professional usage or industrial applications.

KNOW YOUR UNIT

Model: CHX2
Use this charger for X2 battery pack only.

1. Power cord
2. Lower cover
3. Electrical contacts
4. Upper cover
5. Wall mounting hole

SPECIFICATIONS

20 Max Lithium Ion 2.5Ah, 45Wh

Model: B50X2

20 Max Lithium Ion 5.0Ah, 90Wh

Input Frequency| 50Hz/60Hz
Output Voltage| 21V. d.c.
Output Current| 2A
Weight| 0.75 lbs

OPERATION

WARNING: Do not use the charger outdoors or expose it to wet conditions. Water entering the charger will increase the risk of electric shock.
Explosive gases. Prevent Flames and sparkles. Provide adequate ventilation during charging.

HOW TO USE THE CHARGER
There are two positions can operate the charger:

1. Horizontal: Put the charger on a table horizontally and make it stabilize.
2. Vertical: Install two nails on a wall vertically, put the charger on the two nails fixedly.1
   NOTE: The charger has hanging hols for convenient storage. Install screws in the wall 2 inches (50.8 mm) apart. Use screws sufficiently strong to hold the combined weight of the charger.

HOW TO CHARGE THE BATTERY PACK
WARNING: This Lithium-Ion battery pack is shipped partially charged. Fully charge the battery pack before using it for the first time.

Charge the Lithium-Ion battery pack only with the correct charger. Connect the charger to a power supply, the light indicator of the charger turns red. Align the raised ribs of the battery pack with the slot in the charger (Fig. 2). Insert the battery pack into the charger, the light indicator of the charger turns green and it flashes. The charger will communicate with the battery pack to evaluate the condition of the battery pack.

HOW TO REMOVE THE BATTERY PACK FROM THE CHARGER
It is fully charged and the four lights of the battery turn on. Disconnect the power supply from the charger. Remove the battery pack from the charger.

CHARGING A COLD BATTERY PACK
A cold battery pack may be placed directly onto the charger port but charging will not begin until the battery temperature warms to within an acceptable temperature range. When a cold battery pack is placed on the charger, the charger may indicate the pack is not ready to charge. Please refer to the charger operator’s manual. When the battery pack warms to approximately room temperature the charger will automatically begin charging.

CHARGER LIGHT INDICATOR

MAINTENANCE

CLEANING
Unplug before any cleaning work. Keep this charger free of debris and dirt. Wipe down the equipment with a cloth and/or compressed air. It is highly suggested that you clean the device after every use.

TRANSPORTATION
Disconnect the power supply before transportation, and place the charger into a box to avoid being exposed to sunlight during the transportation. Allowed temperature range is between 25°F(-4°C) and 122°F(50°C) during the transportation. Protect the charger from any heavy impact or strong vibrations that may occur during the transportation in vehicles.

WARNING: The use of any accessory not specified in this manual may present a risk of personal injury.

Shorting the battery terminals together may cause burns or a fire. When the battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another.

STORAGE
Keep the charger clean and clear of debris. Do not allow foreign material to get into the recessed cavity or onto the contacts. Wipe the charger clean with a dry cloth. Do not use solvents or water, and do not place the charger in wet conditions.

• Unplug the charger when there is no battery in it.
• Charge the battery before placing it in storage.
• Store the charger at normal room temperature. Do not store it in excessive heat.Do not use the charger in direct sunlight or in damp conditions. Do not charge outside. Recharge at room temperature. If the battery is hot, allow it to cool down before recharging. Disconnect the power supply before maintenance or cleaning.
• To maximize the life of the battery, Fully charge before storage.
• After charging, the battery pack may be stored in the charger, as long as the charger is not plugged in.
• Do not store the battery pack on the tool.
• Store the battery in a clean, dry place. Cover it to provide added protection.

ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed of with household waste.

According to the European Battery Directive, defective or used battery packs/ batteries must be collected separately and disposed of in an environmentally correct manner. Please recycle where facilities exist. Check with your local authorities or retailer for recycling advice. It will then be recycled or dismantled to reduce the impact on the environment and human health since they contain hazardous substances.

TROUBLESHOOTING

Suspected malfunctions are often due to causes that the users can fix themselves. Therefore, check the product using this section. In most cases, the problem can be solved quickly.

authorized service center.
The charger broken| Contact an authorized service center.
Red light and green light flash alternately at a frequency of 1 Hz during operation| Temperature out of working range of the battery pack| Remove the battery pack from the charger, wait for 15 minutes to cool down.

If further assistance is required, take the unit to a qualified service dealer.

WARRANTY

LIMITED TWO-YEAR WARRANTY
2-year limited warranty on all Senix X2 series outdoor battery-powered equipment and chargers. 2-year limited warranty on all Senix X2 batteries. FOR TWO YEARS from the original date of retail purchase this Senix product is warranted against defects in materials or workmanship on power tools. FOR TWO YEARS from the original date of retail purchase this Senix product is warranted against defects in materials or workmanship on batteries.* This warranty does not cover normal wear of parts and components such as cutting chain, line or blades nor does this warranty cover product transportation cost for warranty or service.

Warranty is subject to the following conditions:

• Warranty applies to the original purchaser at retail and is not transferrable*
• Warranty Registration at www.senixtools.com
• The tool has not been misused, abused, neglected, altered, modified or repaired by anyone other than an authorized service center
• Only genuine Senix accessories have been used with or on this product
• The tool has been subjected to normal wear and tear
• The tool has not been used for trade or professional purposes
• The tool has not been used for rental purposes
• This warranty only covers defects arising under normal usage and does not cover any malfunction, failure or defect resulting from misuse, abuse (including overloading the product, exposure to water or rain) accidents, neglect or lack of proper installation and improper maintenance or storage.

To locate your nearest Senix service provider call toll-free at 800-261-3981 or email us at service@senixtools.com.

Additional Limitations
Any implied warranty granted under state law, including warranties of merchantability or fitness for a particular purpose, are limited to three years from the date of purchase on power tools and chargers and seven years on batteries. The manufacturer is not responsible for direct, indirect, incidental or consequential damages. Some states and provinces do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or province to province. YAT USA declines any responsibility regarding civil liability arising from abusive use or not in conformity with proper use and maintenance of the machine as described in the operator’s manual.
YAT USA is not responsible for direct, indirect, incidental or consequential damages. After the purchase, the manufacturer recommends proper maintenance of the machine and reading the operator’s manual before using the machine. *Original purchase receipt may be required for proof of purchase For customer service contact us toll-free at 1-800-261-3981 or Senixtools.com. YAT USA, Inc. 6441 Hendry Rd. Suite A Charlotte, NC. 28269

WWW.SENIXTOOLS.COM

References

• SENIX Tools has you covered in the yard and in the shop
• SENIX Tools has you covered in the yard and in the shop

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>