Bestway S01 Vancouver Air Jet Plus Inflatable Hot Tub with App Control Instructions
- June 17, 2024
- Bestway
Table of Contents
Bestway S01 Vancouver Air Jet Plus Inflatable Hot Tub with App Control
Product Information
Specifications
- Product Name: Suction Fitting Outlet Assembly
- Model: S01
- Intended Use: Self-Contained Factory Manufactured Spas
- Service Type: Blockable
- Life Expectancy: 3 years
- Installation: On spa pool liner and wall orientation
Product Usage Instructions
Installation
- Locate the designated area on the spa pool liner and wall for installation.
- Ensure the area is clean and free of debris.
- Place the Suction Fitting Outlet Assembly in the designated location.
- Secure the assembly following the manufacturer’s guidelines.
Maintenance
Regularly check the assembly for any signs of damage or blockages. Clean as
needed to ensure proper suction and functionality.
Safety Precautions:
Always follow the manufacturer’s instructions for safe usage. Do not use the
product if it shows signs of wear or damage.
Frequently Asked Questions (FAQ):
-
Q: What is the recommended frequency for maintenance?
A: It is recommended to check and maintain the Suction Fitting Outlet Assembly monthly to ensure optimal performance. -
Q: Can this product be used in all types of spas?
A: No, this product is designed for use specifically in Self-Contained Factory Manufactured Spas as indicated in the user manual.
General Certificate of Conformity (GCC)
- Identification of the product covered by this certificate:
- Sample Description: Suction Fitting Outlet Assembly; Model: S01
- For use in Self‐Contained Factory Manufactured Spas only. The type of service is Blockable.
- The life expectancy is 3 years. It is installed on the spa pool liner and on the wall orientation
- Citation to each CPSC product safety regulation to which this product is being certified: Electronic Code of Federal Regulations PART 1450—VIRGINIA GRAEME BAKER POOL AND SPA SAFETY ACT REGULATIONS
- US Importer Information:
- Bestway (USA) Inc.
- 3411 E.Harbour Drive, Phoenix, Arizona 85034, United State of America
- Phone: 1 480 838 3888
- Contact information for the individual maintaining records of test results:
- Mi Huang, Certification Engineer
- Bestway Inflatables & Material Corp.,
- No. 208 Jin Yuan Wu Road, Shanghai, 201812, China.
- mi.huang@bestwaycorp.com
- Tel: 86 21 69135588
- Date and place where this product was manufactured:
- Sep. 2020, Jiangsu Province, China
- Date and place where this product was tested:
- March 2020, California, USA
- Report No. 2823‐20028
- Identification of an third party laboratory on whose testing the certificate depends:
IAPMO R&T Lab 5001 E. Philadelphia St. Ontario, CA 91761 USA Phone: (909) 230‐5536