nuroum HP30 Bluetooth Wireless Headset User Manual
- June 17, 2024
- nuroum
Table of Contents
nuroum HP30 Bluetooth Wireless Headset
Specifications
- Bluetooth Connectivity: Bluetooth 5.0
- Noise-Cancelling Mics: Dual noise-cancelling microphones
- Battery Life: Up to 16 hours talk time, one week standby
- Plug & Play: Supports USB connection
Product Features
- Advanced noise-cancellation technology: ECM omnidirectional microphone and paired MEMS omnidirectional microphone
- Wireless or plug-and-play setup: Bluetooth 5.0 with included dongle or standard USB ports
- Smart Boom: Rotatable boom for muting and unmuting
- Extended talk and standby times: Up to 16 hours talk time, one week standby
Product Usage Instructions
- Bluetooth Connectivity: Ensure Bluetooth is enabled on your device, then press and hold the power button on the headset to enter pairing mode. Select ‘NUROUM HP30’ from the list of available devices on your device.
- USB Connection: Simply plug the included dongle into a USB port on your computer or device to establish a connection.
- Smart Boom: Rotate the boom upwards to mute and downwards to unmute during calls.
- Battery Charging: Connect the headset to a power source using the included charging cable. The LED indicator will show the charging status.
FAQ
Q: How do I switch between Bluetooth and USB modes?
A: To switch between Bluetooth and USB modes, disconnect the current connection and initiate a new connection using the desired mode following the product usage instructions.
Q: How do I know when the battery is low?
A: The LED indicator on the headset will flash or change color to indicate low battery. Connect the headset for charging when this occurs.
The NUROUM HP30 headset provides all-day comfort and premium audio technology. Supporting Bluetooth and USB connections, HP30 uses 2 microphones for noise cancellation and intuitive controls to make every call quicker and clearer.
Product Features
- Advanced noise-cancellation technology
- An ECM omnidirectional microphone and a paired MEMS omnidirectional microphone are used by advanced audio algorithms to effectively suppress noise and reverb.
- Wireless or plug-and-play setup
- Connect using Bluetooth 5.0 with the included dongle or standard USB ports to connect to your computer, tablet, and smartphone for easy, quick starts to meetings.
- Smart Boom
- Rotat boom to mute and unmute.
- Extended talk and standby times
- Up to 16 hours of talk time on a single charge, and up to one week on standby.
NUROUM HP30 Datasheet
NUROUM HP30 Datasheet
Contents| Technical Specifications
Physical Characteristics
| USB| USB Type-A & USB Type-C
Flexible mic boom| 250 ° rotatable
Protein cotton earmuffs| Comfortable to wear and reduce ambient noise
Battery Features
| Capacity| 3.7V/400mah lithium polymer battery
Charging| 2 hours (5V/500mA)
Working Time| Talking: 12 hours/ Music Playing: 15 hours
Bluetooth Characteristics
| Version| Bluetooth 5.0
Protocol| HFP, A2DP, AVRCP
Frequency| 2.402-2.480GHz
Operation Range| 20m
Audio Features
| AI noise suppression| support
Echo cancellation| support
Flip-to-mute Mode
| Mute automatically after turning the microphone boom horizontally
Microphone Characteristics
| Microphone Array| 1 ECM microphone + 1 MEMS microphone
SNR
| 57dB@94dB SPL@1kHz,A-Weighted + 63dBV/Pa 94dB SPL@1kHz,A-weighted
Frequency Range| 100Hz-10kHz + 20Hz-20kHz
Speaker Characteristics
| Rated Output Power| 32Ω/10mW
Effective Frequency Range| 20Hz~20kHz
Sensitivity| 110±3dB@1kHz,0.179V
THD| <3%
Dimensions
| Product Dimension| 169mm(L)× 178mm(W)× 68mm(H)(6.65×7.01×2.68 inches)
Net Weight| 140g(4.94 oz)
General
| Compatible OS| Windows/Mac/Linux
Color| Deep Gray
Operation Temperature| -10~50°
Packing List
| 1×HP30
1× USB cable 1× Bluetooth dongle 1× User manual 1× Warranty card
- *All tech specs are subject to change without notice.
Official website:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>