LG Electronics 27UN880 27 Inch FreeSync 4K IPS Monitor Instruction Manual
- June 17, 2024
- LG Electronics
Table of Contents
- LG Electronics 27UN880 27 Inch FreeSync 4K IPS Monitor
- Dismantling information
- Product Identification
- Materials and Components for Selective Treatment
- Tools Required
- Product Disassembly Process
- Disassembly of External enclosure
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
- Product Usage Instructions
LG Electronics 27UN880 27 Inch FreeSync 4K IPS Monitor
Specifications
- Type of Product: Monitor
- Model Names: 27UN880, 32UN880, 32UN88A, 32UR5
Product Usage Instructions
Materials and Components for Selective Treatment
- Displays may contain hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive.
- The majority of these substances are present in the PCB assembly.
- For proper disposal, it is recommended to take the old appliance to authorized handling plants.
Tools Required
- Screwdriver
- Nipper
- Plastic Hera Jig
Product Disassembly Process
- Batteries: No battery present.
- PCBs and Module: Use a Plastic Hera Jig and screwdriver to remove the back cover. Accessible electronic units (PCBs) can be easily removed with a hand and screwdriver.
- Power Cord and Signal Cables: Remove the power cord by hand or detach the provided cables from the product.
- Capacitors > 25 mm: Located in power supply units, can be removed using a nipper.
Disassembly of External Enclosure:
- Unscrew the stand body.
- Push the button and lift the stand.
- Overturn the set and use a jig to disassemble the back cover.
FAQ:
Q: What should I do with hazardous components found during disassembly?
- A: Ensure these components are disposed of at authorized handling plants to prevent environmental harm.
Q: Can I store the displays outdoors?
- A: Displays must be stored in a weatherproof manner as per Directive 2012/192/EU requirements.
- Use containers with covers for storage and transportation.
Dismantling information
- The document is intended for use by end-of-life recyclers or treatment facilities.
- It provides the basic instructions for the disassembly of LG products to remove components and materials requiring selective treatment.
Product Identification
| Type of Product | Monitor |
|---|---|
| Model name | 27UN880, 32UN880,32UN88A,32UR5### |
- Displays must be stored under the requirements stipulated in Appendix VIII (1) or (2) of Directive 2012/192/EU and must, amongst other things, be stored in a weatherproof manner.
- Containers with covers must be used when storing and transporting the Displays.
Materials and Components for Selective Treatment
- Displays may contain hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive.
- However, the majority is present in the PCB assembly.
- To reduce emissions as much as possible, a complete disposal of the old appliance is required.
- This treatment may only be performed in authorized handling plants.
| Materials and components | Notes | Included |
|---|---|---|
| Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) | With a | |
| surface greater than 10 square cm | O | |
| Batteries | For Remote control | – |
| Internal batteries | – | |
| Mercury containing components | display backlights | – |
| Liquid Crystal Displays (LCD) with a surface greater than 100 square cm | ||
| Includes background illuminated displays with gas discharge lamps |
O
Capacitors/condensers (Containing PCB / PCT)| | –
Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter
or height| |
O
External electric cables cords| Power cord| O
Signal cable| O
Gas Discharge Lamps| | –
Plastics containing Brominated Flame Retardants| | –
Components and waste containing asbestos| | –
Components, parts, and materials containing refractory ceramic fibers| | –
Components, parts, and materials containing radioactive substances| | –
Tools Required
List the type that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
| Tool Description | Tool information |
|---|---|
| Screwdriver | |
| Nipper | |
| Plastic Hera Jig |
Product Disassembly Process
- Batteries
- No battery.
- PCBs and Module
- The back cover of the display can easily be removed by a Plastic Hera Jig and screwdriver.
- Once removed this will expose the accessible electronic units (PCBs),
- which can now be easily removed with hand and screwdriver.
- LGD module(together with their casing) is only left after all other parts like electronic units and casing have been removed.
- Power cord and signal cables
- A Power cord plugged into the back of the display can easily be removed by hand or cables are provided as de-attached from the product
- A Power cord plugged into the back of the display can easily be removed by hand or cables are provided as de-attached from the product
- Capacitors > 25 mm
- Capacitors > 25 mm are located in the power supply units and can be removed by nipper
Disassembly of External enclosure
- Unscrew the stand body
- Push the button and lift the stand
- Overturn the set and use a jig to disassemble the back cover
- Disassemble the back cover
- Re-overturn the set and disassemble screw 4EA+4EA and disassemble the PCB
- LCD Module
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>