Qulokar Q6220 Single DIN Multimedia Car Stereo Radio Owner’s Manual

Owner’s Manual
Single Din Car MP3 Player & FM Stereo Radio
USB Playback, Wireless Handsfree

Q6220 Single DIN Multimedia Car Stereo Radio

Wiring Connections

ISO Plug Configuration:

Socket A (Speakers):
A1: Rear Right (+) (Purple)
A2: Rear Right (-) (Purple/Black)
A3: Front Right (+) (Gray)
A4: Front Right (-) (Gray/Black)
A5: Front Left (+) (White)
A6: Front Left (-) (White/Black)
A7: Rear Left (+) (Green)
A8: Rear Left (-) (Green/Black)| Socket B (Power supply):
B1: Spare
B2: Spare
B3: Spare
B4: +12 Volt Power/Battery (Yellow)
B5: Electric Antenna +12V DC (Blue)
B6: Spare
B7: +12 Volt ACC/Ignition (Red)
B8: Ground (Black)
---|---

Technical Specifications

General
Working Voltage: DC 12V Negative Ground
Current Consumption: 10A (Max. )
Power Output: 4 x 50 Watt (200 Max.)
FM Tuner
Frequency Range:87.5~107.9MHz
Effective sensitivity:10 dB
S/N Ratio: 60dB
I.F. frequency:10.7 MHz
USB
Usable Audio Formats: MP3, WMA, WAV, APE
USB Version: 2.0
Max. USB/TF Memory Support: 64GB
USB Charging(Orange Connector): 5V/1A
Bluetooth
Bluetooth Version: 5.0
Protocols Support: AZDP, AVRCP
Wireless Range:approx. 8 metres
Transmission frequency:2.4GHz

General Operations

Turn Unit on/off, Change the Source
Press the (4) button to turn on the unit. Press and hold this button to turn the unit off.
Change Modes(Source)
Press the MODE button to select the different modes: Radio, USB(with USB device inserted).
BT(Bluetooth) and AUX IN(aux audio input).
Adjust the Volume (VOL)
Rotate the VOL knob to increase or decrease the volume level.
Adjust Menu Options (SEL)

• Quick short press the SEL button(volume knob) on the front panel to enter the setting menu, then press the SEL button repeatedly to cycle through the following setting menu:  BASS, TREBLE, BALANCE, FADER, LOUD(Loudness ON/OFF), EQ(FLAT, ROCK, POP, CLASSIC, JAZZ, OFF), Stereo/Mono, DX/LOCAL, Volume
• Press and hold the SEL button(volume knob) on the front panel to enter the following function setting menu:region tuner (Latin /Brazil/Asian/Europe/USA/South USA frequency)
• Rotate the VOL knob to adjust the selected item.

Mute On/Off
Briefly press the MUTE button on panel or on remote control to toggle mute on or off.
Setting the Clock

• Short press the CLK button on the front panel to display time.

• Press and hold the CLK button, the hours digits start flashing on the display.
  Rotate the VOL(volume) knob to adjust the hours.

• Short press the CLK button, the minute digits start flashing.
  Rotate the VOL(volume) knob to adjust the minutes.

USB Charging for smartphone
The charging USB port is designed for charging for iPhone / android mobile phone.
The maximum charging ability is 5V/1A.
Play Songs from USB flash memory device
If you would like to play song contained on a USB stick, please insert the stick into this USB port.
The unit will play automatically MP3/WMA songs.
AUX IN JACK
Insert a portable MP3 player into this jack, hear the song from the external device via the car speakers.
Reset
Push the RESET button with a thin object with a pointed end to reset the uniut.
This function may be used when the LCD does not display normally or sound is distorted, or when any of controls are disabled.

Radio Operations

Change Bands
In radio mode, shortly press the BAND button to switch between the FM1 FM2 FM3
To Store / Recall Preset Stations
The radio can be stored 6 preset stations for each band (FM1, FM2, FM3), a total of 18 preset stations.
– To memorize a station:
Press and hold a desired preset buttons (1-6) to save a radio station.
– To recall a preset station:
Short press the respective station button (1-6) to choose a radio station.
Manual Tuning
In the radio mode, press and hold the or button to enter the manual tuning mode, then briefly press the or button to search the next or previous frequency step by step.
Seek Tuning
In radio mode, press the or button, the automatic search will start, it will search upward or downward for the strong signal radio station within the current band. The auto searching will stop until find a station.
Automatic Store Preset station (AMS or BAND)
Press the AMS(or long press the BAND) button to select 6 strong stations and store them in the current band automatically.
Briefly press the AMS button on front panel (or on remote control) button to recall the preset stations saved in the memories of each band

USB Playback

Select Next Track or Previous Track
In the USB playback, briefly press the or button to skip to next or previous track.
Faste Forward/Reverse
Press and hold the or button to fast forward or reverse a track.
Play / Pause
Press the button to interrupt the playback of a music (pause function).
Press this button again to continue the playback.
Introduction Scan
Press the INT button to play the first 10 seconds of all track.
Press again to stop the introduction scan, and play the current tracks.
Repeating the track
Press the RPT button to toggle between RPT ALL (Play all track), RPT ONE(Continuously repeat current track) and RPT FOD (Continuously repeat all tracks in current folder).
Playing all tracks in random
Press RDM button to play all tracks randomly. Press again camcel random playback.
Track/Folder Navigation
– Press the -10/+10 buttons to jump 10 tracks backward or forward.
It only works when there are more than 10 tracks inside the USB stick.
– Press and hold the -10/+10 button to select the previous or the next folder.
(If there are folders on the storage medium. )
Select the Song for playback in MP3 format
a) Press the AMS(or long press the BAND) button on the front panel to enter track search mode.
First the word “SCH* will appear on the display.
b) Rotate the VOL knob select the number of your favorite track wtih high speed.
c) When the desired track number appears, confirm your selection by pressing SEL button (VOL knob).
If no any operation in 5 seconds, it will play the current track.

Bluetooth Operation

Pair and Connect
Before using a Bluetooth device for the first time, it must be paired and connected.

1. User can complete the pairing steps from your Bluetooth device.
2. When the phone finds the car audio system, the “CAR BT” name will be displayed. Choose the “CAR BT” from your phone list to pair and connect with the car audio system.

Answer a Call
When the mobile phone is called, the incoming telephone number displays on the LCD display. press the button to answer the incoming phones.
Redial Last Dialed Number
Press the button to redial the last dialed phone number.
Reject or End a Call
Press the button on the front panel to reject or end the call.
Switch Audio Between Car Audio and mobile Phone
During a call, press the SEL button (Volume knob) on the front panel to switch the audio source from the car audio system back to your mobile phone.
Audio Streaming (A2DP)
This car radio supports A2DP (advanced audio distribution profile) wireless streaming audio from a Bluetooth mobile device directly to your head unit. The following functions can be used to control the music playback.

• Skip to Next music: Press the button to play the next music in the mobile phone.
• Skip to Previous music: Press the button to previous music in the mobile phone.
• PLAY/PAUSE: Press the button to pause or restore the music playback.

Any question or defect of MP3 car Player, pls feel free to contact
E-mail:qulokar@163.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>