Auckly A28 15W for Magsafe Car Charger User Guide
- June 17, 2024
- Auckly
Table of Contents
Better Choice
Better Life
A28 15W for Magsafe Car Charger
So laden Sie richtig auf?
Comment Recharger Correctement?
Unable to charge or slow to charge
Laden kann nicht oder langsam geladen werden
Impossible de charger ou tent a charger
The
best experience is the Magsafe phone case
SCAN TO GET
SCAN TO GEHEN
Lifetime Replacement
AND Mystery prize
Mystery-Preis
1. Always use the included USB cable| 2. Other cables won’t work well with
me
---|---
|
1.MagSafe Case or Caseless| 2. I can’t charge properly Ring Holder / Cards /
Metal
|
1. No problem with fast charging| 2. it’s too hot and won’t charge well
|
Indicator Light Guide
| Charger Status | Plugged In | Standby | Charging/ Fully Charged | Error Detected |
|---|---|---|---|---|
| Indicator light | Breathing | On | Off | Flashing |
If an error is detected:
- Check that your phone supports wireless charging and does not have any credit cards, stands, or other metal attachments on the back (other than the magnetic ring).
- After checking the above, unplug and plug in the charging cable again to resume normal charging.
Important Reminders
- Compatible with MagSafe-enabled iPhones and cases.
- This charger supports an input of 9V 2A and outputs a maximum of 15W.
- Only use the cable provided with the charger. An Apple cable or other third-party cable may interfere with charging.
- This charger requires a charging adapter that supports OC or PD fast charging and an output of at least 18W.
- Charger must be plugged in to power supply to charge devices.
Safety Warnings
- Do not place the device in temperatures below 0°C (32°F) or above 60°C (140°F).
- Do not attempt to disassemble the device, expose it to an open flame, or submerge it in water to avoid damaging the device.
- Always check for damage to the device, cables, or other accessories before using the device. If damaged, do not use the device.
- Do not attempt to disassemble or modify the device in any way, as it may cause serious damage and void the warranty.
- Do not expose the device to extremely hot, humid, or corrosive environments to avoid damaging the device.
Manufacture: Yichuangyun
Technology Shenzhen Limited
Add: 7F719-1, Office Building A,
Xintianxia Bairuida Building,
Vanke City Community,Bantian Street,
Longgang District, Shenzhen
Vatmaster Consulting GmbH Bettinastr. 30
60325 Frankfurt am Main, Germany
[email protected]
EVATOST CONSULTING LTD
uite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff,
Wales, CF15 7QR
[email protected]
Designed in Germany
Made in China