rafuel 456 Flux Refuel Charging Dock User Guide
- June 17, 2024
- rafuel
Table of Contents
CHARGING DOCK
REFUEL CHAGRGER USER GUIDE
Base LED Indicator
- Power Connection: When connected to a power source, the base LED will briefly illuminate green, indicating power is successfully connected (no battery packs should be on the dock at this stage).
- Battery Status Indicator: Upon placing a battery pack in either of the two slots, the base LED will turn red to signify charging and green when fully charged.
- Independent Side Indicators: The right and left sides of the LED indicator operate independently, displaying the charging status of each respective battery.
Basic Usage Instruction
- Charging Capacity: The dock charger is designed to simultaneously charge two battery packs.
- Battery Placement: Make sure to align the female USB-C ports in your battery pack with matching male USB-C ports in Refuel charging Dock
- Safe Removal: To remove the battery pack, lift it upwards from the dock charger. Avoid side-to-side shaking to prevent damage to the connector.
Optimal Performance
For best performance, exclusively use the provided charging accessories,
including the Darklab wall adapter and the USB-C cable.
Technical Information
- Output Voltage: 5V
- Charger Input: 5V 2A
- Maximum Output Current: 2A
- Compatible with the following battery-packs: PowerBolt, PowerBolt +, PowerBolt II, and PowerBolt II+.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>