DonosHome BT60 Battery Analyzer Tester User Manual

DonosHome BT60 Battery Analyzer Tester

Product Information

Specifications

• Voltage: 12V
• Supported Battery Types: Plate AGM, Spiral AGM, GEL, EFB, Lithium
• Measurement Range:
  • CCA: 100-3000
  • SAE: 100-3000
  • CA: 100-3000
  • MCA: 100-3000
  • DIN: 100-2000
  • IEC: 100-2000
  • EN: 100-3000
  • BCI: 100-3000
  • JIS: 26A17–245H52
  • Ah:
  • Moto: 2-120 Ah
  • Car/Truck: 30-220 Ah

Product Usage Instructions

1. Battery Analyzer Overview

Before use, familiarize yourself with the different components of the BT60 Battery Analyzer:

• Display monitor, etc.
• Red clamp (positive) and black clamp (negative)
• ESC, F1, OK buttons
• USB port for connectivity

2. Connecting the Analyzer

Connect the analyzer to the battery following the instructions provided in the manual.

3. Battery Testing for Motorcycles

Follow the steps outlined in the manual to perform battery testing specifically for motorcycles.

4. Battery Test Results Interpretation

After conducting the test, interpret the results based on the displayed information. Common interpretations include:

• Good battery
• Requires recharging
• Weakened battery but usable after recharge
• Faulty cell – replace battery
• Low current – recharge before use

Frequently Asked Questions

• Q: What types of batteries are supported by the BT60 Battery Analyzer?
  • A: The BT60 Analyzer supports various battery types including Plate AGM, Spiral AGM, GEL, EFB, and Lithium.
• Q: What is the voltage range that can be measured by the analyzer?
  • A: The analyzer can measure voltage in the range of 12V.
• Q: What standards does the BT60 support?
  • A: The BT60 supports a range of measurement standards including CCA, SAE, CA, MCA, DIN, IEC, EN, BCI, and JIS.
• Q: What is the measurement range of the BT60?
  • A: For CCA, SAE, CA, and MCA, the range is 100-3000. For DIN and IEC, it is 100-2000. For EN and BCI, it is 100-3000. JIS ranges from 26A17 to 245H52. Motorcycle batteries range from 2-120Ah and car/truck batteries from 30-220Ah.
• Q: How to interpret battery test results from the BT60?
  • A: The BT60 will display various statuses such as ‘Good Battery’, ‘Good Recharge’, ‘Replace’, and ‘Charge-Retest’. These indicate the condition of the battery and whether it needs charging, replacement, or further testing.
• Q: What does the ‘Charging Test’ indicate?
  • A: The ‘Charging Test’ evaluates the charging system’s condition, showing if it is normal, low, or has no output. It helps identify issues with the alternator or charging belt.
• Q: How can I change the tool’s settings?
  • A: The ‘Tool Setup’ menu allows you to adjust language, perform screen tests, key tests, LED tests, and access information about the analyzer, such as software version, hardware version, serial number, and supported battery types.

“`

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>