Joy Seeker JS-GHED121D-W-NEW Electric Standing Desk with Drawers Instruction Manual
- June 17, 2024
- Joy Seeker
Table of Contents
Joy Seeker JS-GHED121D-W-NEW Electric Standing Desk with Drawers
Product Information
Standing Desk with Drawer
This standing desk with a drawer is designed to provide users with a
versatile and ergonomic workspace solution. The desk allows for easy
transitioning between sitting and standing positions, promoting better posture
and reducing sedentary behavior.
Specifications
- Desk Size: 1200mm x 600mm (47.2 in x 23.6in)
- Height Range: 720mm to 1180mm (28.3 into 46.5in)
- Drawer Size: 585mm x 60mm (23 in x 2.4 in)
- Power Input: 100V-240V
- Max. Speed: 20mm/s
- Motion Noise: Low
Product Usage Instructions
Assembly Instructions
- Start by unpacking all components and lay them out in an organized manner.
- Follow the detailed step-by-step assembly instructions provided in the manual.
- Secure all screws and bolts properly to ensure stability.
- Test the desk’s height adjustment mechanism before placing any items on it.
Usage Guidelines
When using the standing desk:
- Adjust the desk height to suit your comfort level, whether sitting or standing.
- Avoid placing excessive weight on the desk to maintain its stability.
- Regularly clean the desk surface and drawer to keep it in good condition.
- Use the drawer to store small items and keep your workspace clutter-free.
Safety Precautions
Ensure the desk is placed on a flat, stable surface to prevent tipping over
during use. Avoid trapping fingers or hands in the moving parts of the desk
while adjusting its height.
Frequently Asked Questions (FAQ)
-
Q: Is the desk suitable for tall individuals?
A: Yes, the height range of 720mm to 1180mm (28.3in to 46.5in) caters to a wide range of user heights, including tall individuals. -
Q: Can I disable the desk’s height adjustment feature?
A: The height adjustment feature is integral to the desk’s design and cannot be disabled. It is recommended to utilize this feature for optimal ergonomics.
SPECIFICATIONS
- 3 Height Position Memory
- Vertical Range: 72-118cm
CAUTION: DO NOT EXCEED THE MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!
COMPONENT LIST
HARDWARE LIST
INSTALLATION INSTRUCTION
Step 1 Assemble and connect the desk legs.
Step 2 Attach the side plates and the transmission rod to frame.
Step 2-1 Before attaching the transmission rod, check the heights of the
two desk legs to see if they are set at the same level. If not, insert the
transmission rod into the hole in the left leg. Turn the rod to adjust the
left leg until it’s level with the right leg. Turn the rod anti-clockwise to
lower the left leg or clockwise to raise it.
Step 2-2 Ensure the transmission rod is properly inserted into the hole in
the left leg. Smoothly connect the other end of the rod to the end of the
motor drive shaft on the right leg.
Step 2-3
Step 3 Connect the desktop to the frame.
Step 4 Connect the cables.
Step 5 USB & Type-c.
Controller
The Use Instructions of Controller:
-
Save Current Height Setting
Short-press the button, and the display will flash. Press the , , button to save the current height setting to that button. -
Press the ****button to raise the desk continuously until it reaches the highest position of 46.5″ (118cm) or the button is released. -
Press the ****button to lower the desk continuously until it reaches the lowest position of 28.3” (72cm) or the button is released.
-
Press the ****button, and the desk will move to the height that was previously set for that button.
-
Press the ****button, and the desk will move to the height that was previously set for that button.
-
Press the ****button, and the desk will move to the height that was previously set for that button.
Engineering Mode
Settings
Protection Mode Error Codes
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>