GZYSINFLA Inflatable Bubble Tent House Instruction Manual
- June 17, 2024
- GZYSINFLA
Table of Contents
GZYSINFLA Inflatable Bubble Tent House
Please read this instruction carefully and follow it
Hi, thank you for purchasing the Bubble House. Please read this instruction sheet carefully and keep it in a safe place for future reference. If you need assistance, please contact customer support by email. For your safety and continued enjoyment of this product, please read the instruction book carefully before using.
PRECAUTIONS
ELECTRICALLY OPERATED PRODUCT
PRECAUTION SHOULD BE OBSERVED DURING PRODUCT USE AND TRANSPORT TO PREVENT ELECTRIC SHOCK
KEEP THE INSTALLATION INSTRUCTION FOR FURTHER REFERENCE. PLEASE READ ALL THE SAFETY RULES BEFORE SETTING UP. WE BELIEVE IN SAFETY FIRST. PLEASE FOLLOW ALL OF THE RULES FOR YOUR CHILDREN’S SAFETY.
- Do not enter the product until it is fully inflated
- Please make sure the product is fully fixed before using
- During the game, the blower needs to be kept on, and do not let the sundries cover the blower
- Do not play with the product while eating, drinking or chewing any food or item
- Pregnant women, infants and people with head, neck, back or other muscle or bone injuries or disabilities should not play this product
- Please install and disassemble by adults, and adults need be around to supervise during the kids play
- Please clear the space about two meters around the product, and there should be no buildings, obstacles or sundries.
- Do not use the product in windy and rainy
- The installation location should be away from any fire source and inclined surface
- Do not install or drag the product on concrete pavement or other rough surfaces
- Keep the product fully inflated until everyone leaves the product
- Shoes, helmets, hats, glasses, jewelry and any hard or sharp objects cannot be brought into the bubble house
- Please read the product play age and number limit table carefully to avoid damage to the product.
- The blower should be kept away from water and mist. If the blower comes into contact with water, unplug the power cord and do not use the blower until it is dry
PRODUCT PLAY AGE AND NUMBER LIMIT
Product Dimensions| 10ft dia bubble with 6ft length tunnel| 13ft dia bubble
with 6ft length tunnel
---|---|---
Recommended
Number Of Players| 2 – 4| 2 – 3| 2 – 6| 2 – 4
Children| Adults
PRODUCT PARTS
The products contain:
- Bubble House
- 500W Pump
- 750W Blower
- Repair Patches
- Valve Wrench
- Wax for lubricating zips
PRODUCT SPECIFICATIONS
Questions for first use
- When you use the bubble house for the first time, you notice a smell of glue. Because the bubble house is made of PVC material, it will smell bad when it is first used.
- Use the bubble house to find that there are wrinkles. Because the material of the bubble house is thick, there will be wrinkles after being compressed and packed. It is recommended that placing the bubble house in the sun to inflate it.
Under photosynthesis, the wrinkles will be lightened by the sunlight.
SET-UP
-
Fully expand the product on a place free of sharp objects
-
Find the valve and start inflating with air pump
-
Tighten the Valve when finished
-
Make sure the zipper on the bottom of the bubble is closed
-
Find the air tube, connect the air tube to the air blower and start inflating
-
Inflated complete, keep the air blower running when using it
TAKE DOWN
Make sure the product is free from sharp objects.
If there are some stains, please clean them with bubble water in time.
Make sure everyone exit the product.
-
Turn off the air blower, untie the fixed D-ring, and wait for the air in the product to be emptied.
-
Fold the product in half twice to fold to the smallest size.
-
Roll up the product starting from the opposite side of the inflation tube and use your body weight to remove the air inside the product.
-
Store the product in a storage bag and store it in a cool, dry place.
Common Problems
| PROBLEM | Cause analysis | Solutions |
|---|---|---|
| Product inflation cannot reach saturation | Whether the air outlet zipper is | |
| closed | Close the product air outlet zipper | |
| Whether the connection between the air pipe and the air blower is firm. | After |
turning off the air blower, use the binding rope to fasten the air blower
Whether the tunnel is leaked| Use a valve wrench to tighten the valve
Whether the power cord is extended causing insufficient voltage
| Please keep the power supply close to the Bubble House. It is forbidden to
connect long wires without permission. Forbid dangerous use of electricity!
Whether the air blower damaged| Take a video of the power failure to contact
customer service and explain the situation, and the manufacturer will make a
diagnosis
Whether the air blower inflated slowly| Close the product air outlet zipper
Whether the air blower inflated too much| Open the product air outlet zipper
and bend the fan duct a bit
Repair
If the product damaged, please repair it by hand.
Each type of product comes with a patches.
-
Clean the damaged area and surrounding area
-
Measure the size of the damaged location
-
Trim the repair patch to the suitable size
-
Use glue to attach repaired patch
Customer Service
CONTACT US
Check out Our website
www.airfungo.com
Never store an Bubble House while the device is still wet. Allow the products to dry completely before rolling up for storage. Regularly and thoroughly inspect bubble house for holes, tears, others.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>