bcp SKY6515 Folding Sewing Craft Table Instruction Manual

: June 17, 2024
: bcp

Table of Contents

NOTICE
TOOLS REQUIRED
HARDWARE
PARTS
PRODUCT ASSEMBLY
PRODUCT WARRANTY INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

bcp SKY6515 Folding Sewing Craft Table Instruction Manual

NOTICE

Please retain these instructions for future reference.

Please do not exceed the weight limitations of this item.
Do not stand on or use any part of this item as a step ladder.
Firmly secure all bolts, screws, and knobs before use.
Reconfirm that all bolts, screws, and knobs are secure every 90 days.
Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
If any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or factory replacement parts are installed.
Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the product warranty.

TOOLS REQUIRED

PHILLIPS SCREWDRIVER

**FLAT HEAD SCREWDRIVER

**

**ALLEN WRENCH (PROVIDED)

**

**330 LBS TOTAL CAPACITY

**

2 PERSON ASSEMBLY

UP TO 90 MIN. ASSEMBLY
Tools

HARDWARE

A CAM BOLT
B CAM LOCK
C M4 X 20MM SCREW
D M4 X 30MM SCREW
E DOOR HINGE BRACKET
F M3 X 12MM SCREW
G TABLE HINGE
H JOINER PLATE
I TABLE CONNECTOR
J M4 X 18MM BOLT
K KNOB
L SMALL MAGNETIC PLATE
M M3 X 14MM SCREW
N METAL PLATE
O LONG DOWEL
P SHELF SUPPORT
Q NUT & BOLT SET
R CASTER SET
S SCREW GUIDE
T SHORT DOWEL
U LARGE MAGNETIC PLATE

PARTS

MAIN TABLE TOP
TABLE TOP EXTENSION
LEFT SIDE
MIDDLE PANEL
RIGHT SIDE
CUB BY BACK
CUB BY SHELF
SHELF BACK SPLASH
CABINET BOTTOM
CABINET BACK
CABINET SHELF
CUB BY DOOR I
CUB BY DOOR II
CABINET DOOR
SPOOL STORAGE
STORAGE BIN BACK
STORAGE BIN FRONT
STORAGE BIN SIDE
LOWER STORAGE FRONT
LOWER STORAGE BACK
LOWER STORAGE SIDE
STORAGE BIN BOTTOM

PRODUCT ASSEMBLY

Locate and connect the part 12 & 13 cubby doors with three part T dowels.
Attach two part H joiner plates to the top and bottom of the two cubby doors with four part M screws.
Attach two part N metal plates to the part 13 cubby door with two part F screws. Set aside this assembly.
Attach two part 21 lower storage sides to the part 19 lower storage front with two part T dowels, secure with two part D screws.
Attach the part 20 lower storage back to the part 21 storage sides with two part T dowels, then secure with two part D screws. Set aside this assembly.
Attach two part 18 storage sides to the part 17 storage front with two part T dowels, then secure with two part D screws.
Attach the part 16 storage back to the part 18 storage sides with two part T dowels, then secure with two part D screws.
Locate the cubby door assembly and attach two part 15 spool storage panels with four part C screws, two screws per storage panel.
Attach the lower storage bin assembly to the cub by doors with two part C screws.
Attach the upper storage bin with four part C screws, two screws per side.
Attach two part K knobs with two part J bolts to the cubby door assembly.
NOTE: One knob per cub by door panel (part 12 & 13)
Attach one locking caster from one part R caster set to the part 13 cubby door with one part Q nut & bolt set. Set aside this assembly.
Insert three part A cam bolts into the part 5 right side, then attach two part E door hinge brackets with four part F screws, two screws per bracket.
Insert four part A cam bolts into the part 3 left side, then attach two part E door hinge brackets with four part F screws, two screws per bracket.
Insert three part A cam bolts into one side of the part 4 middle panel, then attach one part L magnetic plate with two part M screws.
Flip the middle panel, then insert four part A cam bolts and attach one part U large magnetic plate with two part M screws.
Insert eight part A cam bolts into the part 1 table top, then attach two part G table hinges with six part F screws.
Locate the part 14 cabinet door and attach one part K knob with one part J bolt, then attach one part N metal plate with one part F screw.
Attach the part 8 shelf back splash to the part 7 cubby shelf with two part T dowels, then secure with two part D screws. Set this assembly aside.
Insert six part B cam locks and four part T dowels into the part 9 cabinet bottom, then attach the cabinet bottom to the part 5 right side and secure by turning the cam locks.
Attach the cabinet bottom to the part 4 middle panel, and secure by turning the cam locks.
Insert four part B cam locks and four part T dowels into the part 7 cubby shelf.
Attach the shelf to the part 4 middle panel.
Insert four part B cam locks and two part T dowels into the part 6 cubby back, then attach the cubby back to the part 4 middle panel, secure by turning all the cam locks.
Attach the part 3 left side to the part 7 cubby shelf and the part 6 cubby back, secure by turning the cam locks.
Insert the part 10 cabinet back into the cabinet assembly.
Insert two part B cam locks and two part T dowels each into the part 3 left side, part 4 middle panel, and part 5 right side. Attach the part 1 main table top then secure by turning the cam locks.
Attach the part 2 table top extension to the part G table hinges with six part F screws.
Attach one part R caster set to the part 3 left side with two part Q nut and bolt sets.
Attach one part R caster set to the part 5 right side with two part Q nut and bolt sets.
Attach the remaining caster (see step 6) to the part 4 middle panel with one part Q nut and bolt set.
Attach the part 12 cubby door to the part 3 left side by securing the part E hinge brackets with four part F screws. Then, open the cubby door and connect it to the part 2 table top extension with one part I table connector.
Attach the part 14 cabinet door to the part 5 right side by securing the part E hinge brackets with four part F screws. Insert eight part P shelf supports into the part 4 & 5 cabinet panels.
Insert two part 11 shelves and install twenty part O long dowels into the slots of the part 15 spool storage plates.
Wedge four part S screw guides into part 10 cabinet back and then secure with four part M screws.

Earn points while you shop. Join today!

Give your friends 15% o their first order! For each successful referral you’ll receive 100 points.

bestchoiceproducts.com

Question about your product? We’re here to help. Visit us at:
help.bestchoiceproducts.com

Chat Support
CHAT US!
Product Inquiry

Orders FAQ

Product Assembly

Returns & Refunds

PRODUCT WARRANTY INFORMATION

All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included. All returned items will receive a full refund back to the original payment method. All returned items will not be charged a re-stocking fee.

All returned items require an RA (Return Authorization) number, which can only be provided by a Best Choice Products Customer Service Representative when the return request is submitted. Items received without an RA may not be accepted or may increase your return processing time. Once an item has been received by Best Choice Products, refunds or replacements will be processed within 5 business days.

All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products, and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.

Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items returned are not considered undamaged until they are received by Best Choice Products and verified as such. All damages to items are the customer’s responsibility until the item has been received by and acknowledge by Best Choice Products as undamaged.

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification, or neglect of this product.