JEWELE S TOUCH JT_09_2023 Ultimate Ring Sizing User Guide

Table of Contents

Specifications

Product Name : Ultimate Ring Sizing Guide
Function : Accurate ring size measurement
Reference Table :
- Size 3 – 14.1 mm
- Size 4 – 14.9 mm
- Size 5 – 15.7 mm
- Size 6 – 16.5 mm
- Size 7 – 17.3 mm
- Size 8 – 18.1 mm
- Size 9 – 19.0 mm
- Size 10 – 19.8 mm
- Size 11 – 20.6 mm
- Size 12 – 21.4 mm
- Size 13 – 22.2 mm

Ring Size Reference Table

To determine your ring size, measure the inside edge of one of your existing rings against the provided reference table.

Ring Size Measuring Tool

Cut out the ring sizer as shown in the guide.
Make a small slit for Slot B as indicated.
Position the sizer around your finger with the numbers facing you where you intend to wear the ring.
Gently pull Tab A through Slot B until the sizer fits comfortably around your finger.
Your ring size corresponds to the number aligned with Slot B.

FAQ

Q: Why is it important to print the page at a 100% scale for precise sizing?
- A : Printing the page at a 100% scale ensures that the measurements on the reference table and ring sizer are accurate and not distorted due to resizing, leading to more precise ring size measurements.
Q: How do I know if I measured my ring size correctly?
- A : To ensure accurate measurement, double-check that the ring sizer fits comfortably around your finger without being too loose or too tight. You can also compare the measured size with the preference table to confirm accuracy.

Follow this guide for accurate ring size measurements.

IMPORTANT : Size measurements can differ due to screen resolution. For precise sizing, kindly print this page at a 100% scale

JEWELE S-TOUCH-JT_09_2023-Ultimate-Ring-Sizing-fig1

Measure the inside edge of one of your existing rings against the chart below to determine the size.

Cut out this ring sizer

Carefully cut out the ring sizer.
Make a small slit for Slot “B”.
Position the sizer around your finger, ensuring the numbers are on the outside and facing you, where you intend to wear the ring.
Gently pull the pointed end of Tab “A” through Slot “B” until the sizer fits comfortably around your finger.
Your ring size corresponds to the number aligned with Slot “B”.

Read User Manual Online (PDF format)