ZRZLMVP S09 Switch Pro Controller Wireless Control User Manual
- June 17, 2024
- ZRZLMVP
Table of Contents
ZRZLMVP S09 Switch Pro Controller Wireless Control
Button Illustration
About Connection Method
Connect to N-S Console -Wireless Mode
Note
- Do not touch the stick while connected.
- Please turn off airplane mode.
- In the initial menu of N-S/Lite/OLED Console, click on the “Controllers” option- then click on the “Change Grip/Order” option and enter the Controller Pairing Mode.
Note: You can also open “System Settings – Controllers and Sensors
* Change Grip/Order”, and enter the Controller Pairing Mode.
2. Press and hold the **SYNC** button for 3 seconds to enter the pairing state, the LEDs flash frequently.
3. After the connection is successful, the LED1 is constantly on.For N-S Console -Wired Mode
- Before starting the wired connection, please make sure that the “Pro Controller Wired Communication” option is turned on in the system settings of the N-s Console.
- When the controller is connected to the official dock of the N-S with the Console sit in through the USB-C cable, it can be used as a wired controller.
- Unplug the USB-C cable, the controller turns into the wireless (Blue-tooth) mode and automatically reconnects to the Console.
- If our controller turns off after unplugging the cable, please press the [HOME) button for a few seconds.
Wake up (and Re-connect) the N-S Console
Press and hold the [Home] button for 1S can wake up (and re-connect) the console, but please note the wake-up and re-connect function only works when the connected device this time is the same device connected last time.
Connect to Android via Blue-tooth
Note: Not all Android/lOS games are compatible with the controller,
please confirm that the game supports the controller before use.
- Press the [Bl and [HOMEl buttons at the same time to turn on the controller. when the LED1/LED2 flashes frequently, the controller enters the search mode. (To prevent accidental touch, it is recommended to press and hold the [Bl button first and then press the [HOME] button. Please make sure that these two buttons are pressed and held at the same time for more than 3 seconds)
- Turn on the Bluetooth of the phone, enter the search mode, and click on the device to search for the controller of “Gamepad” to connect.
Connect to IOS via Bluetooth
- Press the [Al and HOME] buttons at the same time to turn on the controller. when the LED2/LED3 flashes frequently, the controller enters the search mode.
- Turn on the Blue-tooth of phone, enter the search mode, and click on the device to search for the controller of “Xbox WirelessController” to connect.
Connect to PC via USB-C Cable
Connect the controller to the computer with the USB cable. The LED1 and LED4
of the controller will flash slowly at the same time, and then it is
successfully connected. The controller defaults to Xinput mode on the PC side.
Press and hold the [HOMEl button for 3s, it can be converted from Xinput to the Dinput mode.
Note:
- On PC devices is required Win 7 above the system version.
- Not all PC games are compatible with the controller, please confirm that the game supports the controller before use.
About TURBO Function
- The Buttons Support Turbo: A / B / X/Y/L/ZL/R / ZR buttons.
- Two types of turbo: manual turbo and auto turbo:
- Open manual turbo: Press and hold the [T] button, and then press and hold one of the function buttons to turn on the manual turbo.
- Open auto turbo: Press and hold the [T] button, and then press and hold the button that has turned on the manual turbo to turn on the auto turbo.
Clear turbo
- Press and hold the IT] button, and then press and hold the button that has turned on the auto turbo to turn off the current button with the turbo function.
- Clear all-set button turbo: Press and hold the I-I button and the [Down] arrow on the D-pad. Once the controller vibrates, the turbo function of all buttons is closed.
- Turbo Speeds: The first level is 5 shots/s; the second level is 12 shots/s; the third level is 25 shots/s.
Adjust the turbo speed
- Press and hold the (T) button and the [Upl arrow on the D-pad. Once the controller vibrates, the turbo speed is successfully increased.
- Press and hold the (T) button and the [Down arrow on the D-pad. Once the controller vibrates, the turbo speed is successfully reduced.
About the Back Button Function
- The buttons that support mapping to back button(ML/MR): A/B /X/Y/L/ZL/R/ZR /L3 /R3 / D-pad(Up, Down, Left, Right)
- Up to 16 buttons can be mapped to ML/MR button.
Setting Steps
- Firstly, keep the controller working, press and hold the [M] button and IMLI (or MR) button for about 3 seconds simultaneously, the controller vibrates one time, and the RGB lights turn white and slow flash.
- Then press the function buttons you want to set.
- Lastly, press the [ML] (or MR) button again to save, the controller vibrates one time, RGB lights return to the normal connection status, and the setup is complete. (For example: press and hold the IMl button and the IMLI button at the same time for 3 seconds, after the RGB lights turn white and flash slowly, press the B] button, then press the [A] button after one second, last press the [X) button after 3 seconds, when the setting is completed, press IMLI button to save and exit. The function of “ML” button at this time is”B” button function, after 1 second is”A” button, and after 3 seconds is the “X” button).
Clear the back button function: Press and hold the IM] button for 5 seconds
Enable and Disable the back button
This function is mainly to solve the problem of touching the back button by
mistake. After completing the setting of functions with the ML or MR button,
double-click the SL button to disable/enable the ML button, and double-click
the SR button to disable/enable the MR button. (Double-click means clicking
twice quickly.)
Auto turbo of the back button
This function is only available when multiple key values are edited with the
ML or MR button, and not available when only a single key value is edited.
Take the ML/SL button as an example:
After completing the setting of functions with the [ML] button, long press the
ISL button for 3 seconds, and the controller vibrates once, at this point, the
IMLl button will enter into an auto turbo state. After every release the auto
turbo function, the auto turbo function releases again automatically 5
seconds. Then long press the ISLl button for 3 seconds once again, and the
controller vibrates once to delete the auto turbo function of the [ML) button.
(The MR/SR buttons are set in the same way as the ML/SL buttons)
RGB Lighting Adjustment
- There are 10 kinds of RGB light modes: dazzling color mode, continuous light changing mode, 7 kinds of fixed color mode(Red, Orange, Yellow, Green, Cyan, Blue, Purple), and flicker mode.
- Press light adjustment button once to change to another mode. After completely switching the 10 kinds of light modes, the light will be turned off. Then press the light adjustment button ED once again, and the light will be turned on from dazzling color mode.
- There are 4 levels of light intensity of RGB: 40%-60%-80%- 100%. Press and hold the light adjustment button , then push up the left stick once to add one level, and push down the left stick once to downshift one level.
- Pressing the light adjustment button and IT button at the same time will switch to dazzling color mode.
- Long press the light adjustment button for 6 seconds to turn off the RGB light.
Vibration Intensity Adjustment
- 4 Levels strength: 0%-30%-75%-100%, Default 75%.
- Press (the LI [ZLI [R] [ZR] buttons and hold for about 2 seconds simultaneously, the intensity of vibration will be adjusted.
Note
- Be sure your controller is connected to the N-S console.
- The vibration setting will be saved when the controller is turned off.
Charging Tips
- When the controller is turned on: the LED indicator will flash rapidly when the battery is in low power status; the LED indicator will flash at low speed when the battery is charging; the LED indicator will stop flashing when the battery is fully charged.
- When the controller is turned off: the LED indicator will flash in low speed when the battery is charging; the LED indicator will go out when the battery is fully charged.
Charging parameters
- Polymer battery : 1000mAh
- Normal operating current: 20mA
- Charging time: 2.5-3.5 Hours
- Input voltage : 5V 0.5A
- Maximum vibration operating current: <250mA
How To Power Off
- Under connection status, there is not any operations within 5 minutes, and then the controller powers off automatically.
- When the controller disconnected and the console’s screen display was off, then the controller powered off automatically.
- Press and hold the [HOME) button about 5 seconds until the controller power off.
- Press [SYNC) button.
How to Restore Factory
- Press and hold the [L3] and [IR3] buttons at the same time, and press the [HOME] button for 2 seconds, the four LEDs turn on once and then off, and the setting is complete. (make sure the controller is turned off)
SERVICE SUPPORT
If you encounter difficulties or product defects in the process of using the
product, please contact our after-sales service through the purchase platform.
We will analyze once receive your feedback, and assist you in solving the
problem or providing a replacement of the product. We also welcome your
valuable suggestions to help us continuously optimize this product. We wish
you a pleasant life.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>