Ergooffile HLC03 Standing Desk Chair User Manual

Table of Contents

Ergooffile-HLC03-Standing-Desk-Chair-PRODUCT

Please read the following instructions carefully and use the product accordingly.
Please keep this manual and hand it over when you transfer the product.
This summary may not include every detail of all variations and considered steps. Please contact us when further information and help are needed.

Notes

Before assembly, please make sure all parts are intact, then assemble the product according to the instructions.
Incorrect assembly may result in malfunction or injury.
Damaged parts can impair the safety and function of the product. If any parts are damaged or missing, please contact us first and do not begin assembly.
Press the button under the seat or pull the lever upwards and downwards to adjust the seat height.
This stool holds only one person. Maximum static load capacity: 120 kg.
Caution: To prevent the stool from tipping over and the user from falling, the stool should be placed on even ground.
The stool base should be in 100% contact with the floor and do not lift both of your feet off the ground; Please do not use the stool on slippery ground; Please do not sit on the edge of the stool, the whole seat must be occupied when you sit down; Never stand on the stool; Do not use it as a ladder or step stool.
The base is suitable for all floors, such as wood, tile, PVC carpet, etc.
The gas spring must not be heated or opened. Only maintenance technicians can repair or replace the gas spring.
Do not expose the product to strong sunlight. Keep it away from sharp objects to avoid damage.
If the stool squeaks or creaks, please check the area in question and try to solve the problem with lube.
Wipe the fabric cover with clean water; or wipe it with soapy water, then rinse with clean water.

Warnings

Use the stool only as intended. Incorrect use, e. g. as a step stool, may result in an accident.
Modification or alteration of the product impairs the safety of the product and adds the risk of injury.
During assembly, keep any small parts out of the reach of children. It may be fatal if swallowed or inhaled.
To avoid the potential danger of suffocation, please keep all parts and packaging (films, plastic bags foam, etc.) away from babies and children.