IKEA NORDMÄRKE Wireless Charging Stand Instruction Manual
- June 13, 2024
- Ikea
Table of Contents
IKEA NORDMÄRKE Wireless Charging Stand
Specifications
- Input: 5.0V DC, 2.0A
- Frequency: 115KHz – 148KHz
- R F Exposure : 3 dBA/m at 33 cm
Product Usage Instructions
LED Indicator
- Power on : LED lights up for 3 seconds.
- Charging: LED stays on.
- Charging completed: LED turns off.
- Error: LED flashes.
Cleaning Instructions
Before cleaning or when not in use, wipe the charger with a moist cloth. Do
not submerge the charger in water. Refer to the back of the charger for
recommended precautionary measures and technical data.
Product Servicing
Do not attempt to repair the product yourself as it may expose you to
dangerous voltage points or risks. Contact the manufacturer for servicing.
USING INSTRUCTION
Charger features
- USB power adapter (5.0V, 2.0A) not included.
- Wirelessly charges Qi-compatible devices.
- Compatible with Qi 1.2.4BPP specification.
- Temperature and power monitor for safety.
- LED status indicator.
Instructions for use
- Connect the USB cable to the power adapter and plug it into the wall socket.
- For wireless charging, place the device to be charged on top of the plus sign (+) on the charger. The device must be placed directly over the plus sign (+) on the charger for the charging function to work optimally. Note that on some devices you may have to activate wireless charging in settings.
- If your battery is completely discharged, it may take a few minutes before it starts charging. This is entirely normal. You can see that the battery has begun charging when the battery symbol appears on your phone.
LED indicator (see illustrations)
- Power on: LED lights up for 3 seconds.
- Charging: LED on.
- Charging completed: LED off.
- Error: LED flashes.
Good to know
- Devices may get warm during charging; this is completely normal and they will gradually cool down again after they are fully charged.
- Charging time may vary based on the device’s battery capacity, charge level, the age of the battery and the temperature in the surrounding area.
- Charger storage temperature: -20°C to 25°C.
- Charger operating temperature: 0°C to 40°C.
- Unplug the charger from the power source before cleaning and when it is not in use.
To clean the charger, wipe with a moist cloth.
- Never submerge the charger in water.
- Recommended precautionary measures and technical data: see the back of the charger.
Save these instructions for future use
WARNING
- Only charge devices that are Qi-compatible.
- The wall socket must be located near the equipment and must be easily accessible.
- Only use in dry locations.
- Children should be supervised to ensure they do not play with the product.
- The external flexible cable or cord of this product cannot be replaced; if the cord is damaged, the product shall be destroyed.
Product servicing
Do not attempt to repair this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks.
Technical data
- Type: E2009 NORDMÄRKE
- Input: 5.0V DC, 2.0A Indoor use only
- Operating frequency: 115KHZ – 148 KHz
- Output power: 33 dBµA/m at 3m
Manufacturer : IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN
The ‘Qi’ symbol is a trademark of the
Wireless Power Consortium
RF EXPOSURE INFORMATION
According to RF exposure regulations, under normal operations the end user
shall refrain from being closer than 10 cm from the device.
The crossed-out wheeled bin symbol indicates that the item should be disposed
of separately from household waste. The item should be handed in for recycling
by local environmental regulations for waste disposal.
By separating a marked item from household waste, you will help reduce the
volume of waste sent to incinerators or landfills and minimize any potential
negative impact on human health and the environment. For more information,
please contact your IKEA store.
© Inter IKEA Systems B.V. 2020
FAQ
- Q: What should I do if the cord is damaged?
- A: If the cord is damaged, the product should be destroyed as it cannot be replaced.
- Q: What does the crossed-out wheeled bin symbol mean?
- A: The symbol indicates that the item should be disposed of separately from household waste and handed in for recycling according to local regulations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>