ARF PETS APAUTOFD Automatic Pet Feeder User Guide
- June 17, 2024
- ARF PETS
Table of Contents
ARF PETS APAUTOFD Automatic Pet Feeder
Specifications
- SKU : APAUTOFD
- Power Source : Power Socket or Battery Compartment
- Recording Port : Yes
- Portion Control: Up to 4 portions
- Recording Time : Up to 10 seconds
- Manual Dispensing: Yes
Product Overview
The Automatic Pet Feeder features a cover food compartment with a magnetic lock, an LCD display, a control panel for managing settings, and a food tray with portion control capabilities. It also includes a power socket for continuous power or a battery compartment for backup.
Product Usage Instructions
Managing the Settings
Setting the Time
- Press the SET button. The hour digits will flash.
- Use the arrow buttons to set the current hour and press SET to save.
- The minute digits will then flash. Set the current minute and press SET to save.
Setting Meal Times and Portions
- After setting the time, follow the prompts to set meal times and portions.
- Use the arrow buttons to adjust portion sizes and press SET to save.
- Repeat for additional portions (up to 4).
Recording Meal Calls for Your Pet
- Press and hold the REC button to activate the recording function.
- Speak into the recording port to record a message (up to 10 seconds).
- Release the REC button to stop recording.
- Press PLAY to listen to the recorded message.
Unlocking the Screen
If the unit goes into standby mode, press and hold the SET button for three seconds to unlock the screen and manage settings.
Manual Feeding
If no scheduled feedings are set, press and hold the dispense button to manually provide one portion of food.
FAQ
- Q: How do I fill the food compartment?
- A : Open the cover food compartment and pour in the desired amount of pet food.
- Q: How often should I clean the feeder?
- A: It is recommended to clean the feeder regularly, at least once a week, to ensure proper functioning and hygiene for your pet.
- Q: Can I use wet food in this feeder?
- A: This feeder is designed for dry food only. Wet food may cause clogs or damage to the mechanism.
Thank you for purchasing the ArfPets Automatic Pet Feeder. This User Guide is intended to provide you with guidelines to ensure that the operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. Please read all directions before using the product and retain this guide for reference. This product is intended for household use only. This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty for details. This automatic pet feeder is designed to provide targeted pet food dispensation for your dog or cat, allowing you greater control over feeding times and food consumption for your pet’s dietary needs and overall health and well-being.
Features
- Clock display
- Blue backlight LCD display
- Feeds according to set times
- Adjustable food distribution
- Personal voice message recorder (up to 10 seconds)
- Four (4) feeding times can be set for any time of the day or night
**IMPORTANT SAFETY INFORMATION
**
WARNING
- Do NOT immerse the control panel in water. The base unit should NOT be submerged in water at any time, as this may damage electronic components.
- Do NOT place anything on top of the pet feeder. The unit starts automatically. Keep clear.
- Dispose of all packaging materials properly. Some items may be packed in polybags; these bags could cause suffocation; keep away from children and pets.
- Do NOT allow small children to play with, in or around pet feeder.
- To reduce the risk of injury, close supervision is necessary when an appliance is used by or near children.
- Intended for use with dogs or cats only.
- Do NOT use this pet feeder with puppies, kittens, dogs or cats not able to reach the food tray or with any physical disability.
- Do NOT use outdoors. FOR INDOOR HOUSEHOLD USE ONLY. Check operation frequently to be sure the pet feeder is dispensing properly.
- For dry food use only.
- DO NOT use wet, canned or moist food.
- The pet feeder should be placed on a level surface.
- Before leaving for an extended time, always replace batteries with new batteries.
- Do NOT place any foreign objects in the pet feeder.
- Do NOT disassemble the pet feeder other than components as instructed in this operating guide.
- To protect against electric shock, if using a power cord do not place a power cord or plug in water or other liquids.
- Only use attachments recommended or sold by the manufacturer.
- Do not unplug by pulling on the power cord. To unplug, grasp the plug, not the power cord.
- Do not operate any appliance if it has a damaged power cord or plug, or if it is malfunctioning or has been damaged. Call the Customer Care Center immediately for further instructions.
- To reduce the risk of electrical shock, do not place or store an appliance where it can fall or be pulled into a tub or sink.
- Always unplug any appliance when not in use, before putting on or taking off parts and before cleaning. Never pull on the electrical power cord to remove the plug from the wall outlet.
- Do not use an appliance for anything other than its intended use.
- If the plug of this device gets wet, turn off the electricity to that wall outlet. Do not attempt to unplug.
- Examine this appliance after installation. Do not plug in if there is water on the Power Cord or plug.
- To avoid tripping, always position the power cord out of the way of foot traffic.
CAUTION
- Do not allow pets to chew on or swallow any parts. If you are concerned about the power cord, purchase a cord conduit (a hard plastic protector) at any hardware store to protect the power cord.
NOTICE
- Do not attempt repairs on the pet feeder yourself.
- If an extension cord is necessary, an extension cord with a proper rating should be used.
- Do not use pet feeder for anything other than its intended use. The use of attachments not recommended or sold by the manufacturer may cause an unsafe condition. Do not modify the pet feeder.
- Do not install or store pet feeder where it will be exposed to weather or temperatures below 40°F.
- Do not lift pet feeder by lid, hopper, bowl or bowl holder. Lift and carry feeder using both hands and hopper base, while keeping unit in upright position.
- Read and observe all important notices listed on the pet feeder and in the packaging.
Product Overview
Control Panel
Managing the Settings
- Setting the Time
- Press the SET button. The hour digits will flash.
- Press the ▲ or ▼ buttons to find the current hour and press SET again to save.
- Once an hour is saved, the minute digits will flash.
- Press the ▲ or ▼ buttons to find the current minute and press SET again to save and enter Meal Time Setting Mode.
Setting the First Meal Time
- Once the time is set, the unit will enter Meal Time Setting Mode. The LCD will display the ① icon and the hour digits will flash.
- Press the ▲ or ▼ buttons to find the hour and press SET again to save.
- Once hour is saved, the minute digits will flash.
- Press the ▲ or ▼ buttons to find the minute and press SET a gain to save.
- Repeat the steps above to set additional Meal Times (up to 4) or enter the Meal Portion Setting Mode.
Setting the First Meal Portion
- Once the time is set, the unit will enter Meal Time Setting Mode. The LCD will display the P and the portion digits will flash.
- Press the ▲ or ▼ buttons to set the portion size and press SET again to save.
- Repeat the steps above to set additional portions (up to 4).
Recording Meal Calls for Your Pet
To record a call to your pet at mealtime follow these steps.
- Press and hold the REC button. The MIC light will be displayed on the control panel.
- Speak into the Recording Port (small hole by the MIC light) and record your message (up to 10 seconds).
- Release the REC button when finished recording. The MIC light will go off.
- Press the PLAY button to listen to the message.
Unlocking the Screen
If no activity takes place in 25 seconds, the unit will shut down and enter
standby more. Press the SET button for three (3) seconds to unlock the screen
and follow the instructions above to manage settings.
Manual Feeding
With no times or portions set and display lights on, press and hold the ▲
button to dispense one portion of food manually.
Installing the Batteries
- Install three “D” size alkaline batteries into the battery compartment as shown. Make sure to match the poles (+/-) as indicated.
- If using outlet power, connect DC power cable to the DC jack.
Filling the Food Compartment
- Press both sides of the food compartment and slide upward for removal.
- Fill the compartment with pet food. (Do NOT over fill, as this may clog the unit).
- Slide the Food Compartment back into place.
- Rotate the rotary impeller to align with the slot and press both sides of the food compartment to secure it.
Cleaning/Maintenance Instructions
- Be sure the unit is turned off and the power is disconnected before attempting to clean.
- Wipe with a soft cloth dipped in a small amount of soapy water. Do not use a fully soaked cloth.
- The food tray and food compartment can be removed for cleaning.
- Never submerge the base of this unit in water as it contains vital electronics and may short circuit.
- Do not clean parts in an automatic dishwasher.
- Ensure that all parts are clean and fully dry before attempting to operate or re-fill the food compartment.
CAUTIONS
- This product is designed for use by dogs and cats. Keep out of the reach of children.
- Settings may slow down when batteries are low. Replace batteries and reset. Do NOT use rechargeable batteries.
- If the food compartment is over-full, the infrared sensors may malfunction and food may clog. Clean out the Food Compartment and re-fill according to capacity lines. Food will be distributed properly.
- If “E” shows on the LCD screen, the Pet Feeder has entered Automatic Protection Mode. If this happens, inspect the Food Compartment. If there is food stuck to the bottom, clean thoroughly until the food is removed. Replace the Food Compartment and perform a manual feed. If successful, the product may again be used per these instructions.
- This device uses dual power supplies. When the adaptor is not in use, the product default is battery power.
Specifications
- Size : 9.65” X 11.8” X 15”
- Capacity: 1.14 gal
- Material : ABS
- Net Weight : 4.63 lbs.
- Power Supply : “D” size alkaline batteries (x3) / DC adapter
- DC Power : 5V1A standard power supply
- Motor: Working life – 2,000 hours; rotate speed – 8RPM; rated voltage – 4V Food Category: Dry Dog or Cat food; no canned or wet food or snacks
Customer Service
- Email : support@arfpets.com
- Phone : 877-711-6886
- Distributed by C & A Marketing, 2 Bergen Turnpike, Ridgefield Park, NJ 07660
Made in China
ARF Pets is a trademark of C&A IP Holdings, LLC
©2016 All rights reserved
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>