OWEQPP M-S8 Bluetooth Compatible Headphones Air Conduction User Manual
- June 17, 2024
- OWEQPP
Table of Contents
BLUETOOTH
User Manual
Introduce
Thank you for buying and using Bluetooth headphones This manual helps you understand how to use the Bluetooth headset before using a Bluetooth headset Should understand mobile phone or Bluetooth function.
Start To Use
Press the Bluetooth headset for 2 seconds Show blue and red light alternately
flash Be Careful: [The blue light is less than the model] The state of the
shutdown is 5 seconds long Blue red alternately flicker to let go Search with
a mobile phone
Pairing button 2~3 seconds to start automatic link
How To Match
Search“M-S8’And
Click The Connection
Earphone Charging
Low power Headphone flicker and voice reminding Use the charging line to access USB charging Charging State The red light blue light is full
Function and Operation
NO/OFF Operation Steps
- Pairing: In the shutdown state, press and hold the touch button for 2 seconds (flashing blue and red alternately)
- Power on: In the shutdown state, press and hold the touch button for about 3 seconds, and the blue light flashes
- Shutdown: In the power on state, press and hold the touch button 4 times (red light flicker)
Chinese/English Speech Prompt Switch
In The Boot State , Double 1second Chinese/English switching
| On/Off: | (Long press for 5 seconds) Touch sensing switch |
|---|---|
| Pause/Play: | (Click) Touch sensing switch |
| Previous song: | (Three consecutive strokes) Touch sensing switch |
| Next song: | (Continuous Double Click) Touch Sensing Switch |
| Answer phone: | (Click) Touch sensing switch |
| Hang up the phone: | (Double dick) Touch sensing switch |
| Call rejection: | (Long press) Touch sensing switch for 2 seconds |
| Call sri: | (Long press) Touch sensing switch for 2 seconds |
| Switching between Chinese and English: | Touch sensing switch when not |
connected to the phone (continuous double clicking)
Reminder: Volume increase or decrease needs to be adjusted on the phone
Precautions For Charging :
- Use a DC5V charger like a computer’s USB port or a cell phone chargerThe output voltage the USB port ( Formal safety certification charger )
- Thered light in the charging process
- Recharging and discharging will reduce the battery performance this is a normal rechargeable battery.
Product Parameters
Bluetooth Version : M-S8
Audio : DSP Speech processing
Operating Range : 5-10M
Battery Capacity : 70mA
Support Protocol : HFP/A2DP/AVRCP
Weight : 5.5g
Safety Criteria
- Don’t disassemble or refit the equipment for any reason or cause the earphone to fail or burn up
- Don’t will cause damage to the equipment
- Don’t put the equipment at low temperature or too high (0°C or 45°C)In the environment
- Don’t use equipment thunderstorm in thunderstorm to cause signal interruption
- Don’t use mobile power to charge, otherwise it may cause the headset to malfunction or burn down.
- Don’t charge the charger with more than 1A, otherwise it may cause the headset to malfunction or burn down
[The above 6 points of damage are not warranted]
After-Sale And Support
The product you purchased is nonhuman for failure.
Warranty Information
Warranty period: the quality warranty period of this product is: free service
for 12 months from purchase:
The quality of the product itself is a warranty card Contact with dealers for
free maintenance :
Warranty Information
Customer name|
---|---
Contact Number|
Contact Address|
Product Name|
Product Model|
Date Purchase|
Maintenance Date|
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by
the part responsible for compliance could void the user’s authority to operate
the equipment.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Music Should Young
Binding cell phone number
professional knowledg
Professional answer
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>