Maykers 5055986126126 Chicken Run 3m x 2m User Guide
- June 17, 2024
- Maykers
Table of Contents
Chicken Run
3m x 2m / 10ft x 6.5ft
Assembly Guide
SAFETY
- Read all the safety information and instructions.
- Make sure you have all the parts before the assembling
- Do not assemble the chicken run on a stormy day. It will be damaged.
- Always wear work gloves, long sleeves, and safety goggles when assembling.
- Keep children and pets away from the assembly site.
- When using a ladder, make sure the ground is stable enough to hold the ladder.
- Remove snow from the roof after each snowfall.
- Do not walk on the roof, even if you can.
TOOLS
PART LIST
▉ Note
For this product, tubes and joints are connected using button clips. Button
clips are already inserted inside tubes. When connecting, press the button
clip and insert one tube into the joint. Forcing the tubes in might also work
but you are risking damaging the Clip. Pay attention to the orientation of
Part P.
▉ Note
There are two pairs of holes on the vertical joint of Part C. When connecting
Part 3 to Part C, make sure that the Button Clip is pointing to the left and
right, like what’s shown on the left.![Maykers 5055986126126 Chicken Run 3m x 2m
- Figure 8](https://manuals.plus/wp- content/uploads/2024/02/Maykers-5055986126126-Chicken-Run-3m-x-2m- Figure-8.png)
▉ Note
For screw L, you will need a power tool to drive it into tube D7.
▉ Note
Do not worry too much about the exact location of D3 and D6. Just make sure D6
is completely covered by the two pairs of H.
Notice that on the two detailed illustrations above, screw L is not used. This
is so that you have some wiggle room adjusting D3 and D6. Once you are happy
with the result, use screw L to secure H.![Maykers 5055986126126 Chicken Run 3m x 2m
- Figure 14](https://manuals.plus/wp- content/uploads/2024/02/Maykers-5055986126126-Chicken-Run-3m-x-2m- Figure-14.png)
▉ Note
In the package you will find the poultry net with a width of 1 meter (39
inches). When attaching the net to the chicken run structure, do not precut
the net. Instead, roll the net along the tubes and cut it.
The arrows on the illustrations indicate the flow of the net. Follow the
arrows to roll and cut the net. Use zip-ties to fasten the net to the
tubes.
▉ Note
For the net placed at the back of the chicken run, we suggest rolling the net
roll without measuring or precutting the net like last step. For the net
placed in the front, it’s easier to measure and cut the net, and then fasten
the cutted net to the tubes.
Notice that the rectangular shape in the front has a greater length than the
width of net roll, meaning if you roll the net vertically, the roll will not
be wide enough to cover the rectangular area. In summary, please follow the
arrows to roll and cut the net.
▉ Note
The Cover/Tarp J is secured onto the structure using bungee ball O. Use one
bungee ball per grommet on the tarp. Notice that, at the four corners, use two
bungee balls for one grommet.
▉ Note
When you feel like you have chosen a perfect spot for your chicken run and do
not plan to move it, you can fasten it to the ground using the anchor M.
Use one M per ground joint, like C, D, E, and P.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>