Meifuly B0C44YTFDM 3 In 1 Vacuum Therapy Machine Kit User Manual

USER MANUAL
3 IN 1 VACUUM THERAPY MACHINE KIT

Diagram

Installation Guide

2.1 Mount the Tray
Align the tray with the screw holes on the back and fix it with screws. 2.2 Place the Large Cotton Filter
The built-in large cotton filter should be changed regularly.
First, unscrew interface 1, replace it with a clean large cotton filter, and then tighten interface 1. 2.3 For Butt Lifting
Connect the breast cups to interface 1 with the small Y-shaped hose. 2.4 For Cupping
Connect the cupping cups to interface 1 with the large Y-shaped hose. 2.5 For Grease Cup
Connect the metal grease cup to interface 1 with the silicone hose. 2.6 For Microdermabrasion

• I. Put a small cotton filter on the diamond wand, and then tighten it with a diamond head.
• II. Put the oil filter into interface 1, and then connect the diamond wand to the oil filter with a PVC hose.

2.7 For Spraying
Connect the airbrush gun to interface 2 with a PVC hose.

0perating Instructions

3.1 Power On
Connect the power and turn on the machine, the indicator light is always on, and then enter the function selection interface.
According to your treatment needs, click the icon to enter the corresponding function mode. 3.2 Butt Lifting Mode

• I. Butt Lifting Interface

• II. How to Operate

1. According to your treatment needs, connect interface 1 to the breast cups/ cupping cups/metal grease cups with the corresponding soft hoses.
2. Select the butt-lifting mode. Choose the suitable suction/working time/ suction time/release time according to your personal condition.
3. Click “START” to start working.
4. 0uring the treatment, you can still adjust the suction by clicking or long pressing ‘T’ and “j” until it is suitable.

Note:

1. When you use two breast cups/cupping cups together, make sure that the two cups need to be in contact with your skin at the same time. Otherwise, the air may leak out, resulting in no suction.
2. When you use only one breast cup/cupping cup, Knot the other end of the Y-shaped hose. Otherwise, the air may leak out, resulting in no suction.
3. You need to make sure that the hose is tightly connected to the machine and the breast cups/cupping cups before use. Otherwise, the air may leak out and lead to non-suction.
4. It is recommended to adjust the suction from low to high to find suitable strength for your skin.

3.3 Microdermabrasion Mode

• I. Microdermabrasion Interface

• II. How to Operate
  1.According to the skin area to be treated, choose a proper diamond head to screw onto the diamond wand.
  2.Attach the oil filter to Interface 1, and then connect the diamond wand to the oil filter with a PVC hose.
  3. Select the microdermabrasion mode. Choose the appropriate suction/working time according to your personal condition.
  4. Click “START” to start working.
  5. During the treatment, you can still adjust the suction by clicking or long pressing “I” and “j” until it is suitable.

Note:

1. Together with skin care products for better results when using the microdermabrasion function.
2.  It is recommended to adjust the suction from low to high to find suitable strength for your skin.
3.  Do not stay in the same position for too long when treating.

3.4 Spraying Mode

II. How to Operate

1. Connect the airbrush to interface 2 with a PVC hose.
2. Take off the lid of the spray liquid container.
3. Add the liquid skin care products to the container and then cover it with the lid.
4. Twist the adjustment knob at the end of the airbrush to control the spray quantity.
5.  Select spraying mode. Adjust the working time and click “ST ART” to start the spray function.
6. Long press the trigger to spray the mist.

Note: After using the airbrush, pay attention to cleaning and air drying.

Additional Notes

This machine is not suitable for the following conditions:

1. Sensitive skin
2. Rash
3. Skin damage, inflammation, or infected surgical scars less than 12 months
4. Skin swelling
5. Eyes
6. Genitalia

Product Parameter
Suction: 80cmHg
Power: 25W
Voltage: 100-240V
Frequency: 50 Hz/ 60 Hz
Product Size: 220 x 170 x 167mm
Package Size: 475 x 410 x 240mm
Packing List

Diamond Heads

Select the appropriate diamond head according to the skin area you will treat.

For removing crow’s feet, nose blackheads, and pimples on eyebrows.| For removing blackheads and acne scars on the face.| For removing blackheads and acne scars on the face.

For removing crow’s feet, nose blackheads, and pimples on eyebrows.| For removing blackheads and acne scars on the face| For removing body

For removing fine lines and wrinkles on the face.| For removing fine lines and wrinkles on the face.| For exfoliating the skin on the neck/knee/belbow

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>