Dardoo GS20 Racing Simulator Stand Instruction Manual
- June 17, 2024
- Dardoo
Table of Contents
Dardoo GS20 Racing Simulator Stand
Accessories explanation
Assembly Processes
-
Assemble the left and right adjusting plates with 4 pieces of the bolt(M8×20 ) and 4 pieces of the shim (M8)
-
Assemble the pedal support with 4 pieces of the bolt (M8×20) and 4 pieces of the shim (M8)
-
Assemble left and right adjusting stand with 4 pieces of the bolt (M8×45) , 4 pieces of the shim (M8) and 4 pieces of the nut (M8)
-
Assemble the lower fixing stand with 6 pieces of the bolt (M8×45) and 6 pieces of the shim (M8)
-
Assemble the upper connection bracket with 2 pieces of the Handle Bolt (M8×15)
Handle Bolt: M8×15 (2 PCS) -
Assemble the steering wheel mounting bracket with 3 pieces of the bolt (M8×20) , 3 pieces of the shim (M8) and 3 pieces of the nut (M8)
-
Assemble the seat mounting stand with 4 pieces of the bolt (M8×20) 4 pieces of the shim (M8) and 4 pieces of the Square Nut (M8 ×25×25×5)
-
Assemble the seat adjustment stand with 4 pieces of the bolt (M8×20) 4 pieces of the shim (M8) and 4 pieces of the nut (M8)
-
Assemble the gear mounting stand with 2 pieces of the bolt (M6×16), 2 pieces of the shim (M6) and 1 pieces of the Handle Bolt (M8×15)
-
Assemble the elbow fixing stand and fixing plate on the left or right as your like to the Seat stand with 2 pieces of the bolt (M8×80) 、2 pieces of the shim (M8) and 2 pieces of the nut (M8)
-
Connect the front part stand and the after parts stand with 4 pieces of the Handle Bolt (M8×15)
ASSEMBLY INSTRUCTION
SPARE PARTS:
STEPS: