Ghope SH20.006B03C Retractable Baby Gates Instruction Manual
- June 17, 2024
- Ghope
Table of Contents
Ghope SH20.006B03C Retractable Baby Gates
Growing up together with your kids Retractable Safety Gate Instruction Manual
IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE.
SAFETY INFORMATION
GENERAL
Read this instruction manual carefully and keep it in a safe place for future
reference. The correct use and maintenance of this product is essential.
MAINTENANCE
Regularly check that the gate is functioning correctly, lubricate hinges and
moving components with a suitable spray lubricant. Tighten and adjust mounts
to ensure secure smooth operation. Inspect all components regularly and stop
using if any component is damaged or missing.
WARNING
- To prevent serious injury or death, securely install gate or enclosure and use according to manufacturer’s instructions.
- Incorrect installation can be DANGEROUS.
- DANGER to older children if climbing over the product.
- DO NOT use the safety barrier if any components are damaged or missing.
- The safety barrier must not be fitted across windows.
- NEVER install this product on glass doors. Install this product against reliable doors or walls.
- If the safety barrier is used at the top of the stairs, it should not be positioned below the top level.
- If the safety barrier is used at the bottom of the stairs.it should be positioned at the front of the lowest tread possible.
- NEVER use to keep child away from pool.
- This safety barrier is for domestic use only.
- This safety barrier has a manual closing system.
- NEVER LEAVE the child unattended when using this product.
- Children have died or been seriously injured when gates/enclosures are not securely installed.
- DO NOT put any goods which can be grabbed by children or pets near this product to prevent injury.
- Before using this product, carefully inspect for any loose parts and whether any parts need to be tightened.
WARNING
- This product is intended for use with children from 6 to 24 months or small to medium pets from 4.5kg(10 lbs) up to 18kg (40 lbs).
- ALWAYS check that safety barrier is correctly closesd.
- Use only with the locking/latching mechanism securely engaged.
- Gate must be installed as close to the ground as possible, as per the installation guides.
- NEVER use with a child able to climb over or dislodge/open the gate or enclosure.
- STOP USING when a child can climb over or dislodge the gate.
- Install with this side away from child.
- Regularly check that the safety barrier is properly installed and secure.
- ALWAYS install and use as directed using all parts. Any additional or replacement parts should be obtained from after sales support.
- Barrier must be fitted between rigid surfaces such as plaster board, timber or hard wall.
- You MUST install wall cups to keep the gate in place. Without wall cups, child can push out and escape.
- The gate extends up from 55in to 197in wide and 34in tall, the minimum width of the opening is 27.6in, maximum width of opening is from 55in to 197in, the best width of opening is 35.4in.
- This product is a deterrent and not a substitute for adult supervision. NEVER LEAVE children unattended. Check the gate regularly to ensure safe usage.
MOUNTINGS
- Gate must be installed in a structurally sound opening. Ensure mounting surface(wall, door frame. stair posts. etc) is strong. rigid and has an even surface.
- Note: lf using gate on stairs.it must be placed either on the top step or on the lowest step at the bottom.
- Select the appropriate fixing method from the following list.
-
WOOD MOUNTING
Drill 5/64″(2mm) pilot holes and use the wood screws provided screwing directly into the wood. -
FOR INSTALLATION
Wood Screws -
DRY WALL MOUNTING
Locate the wood stud and follow the wood mounting instructions. Do not mount into dry wall without -
HARD WALL MOUNTING BRICK
Drill 5mm (3/16″) pilot holes, insert anchor and secure with Screws -
FOR INSTALLATION
-
Wood Screws
-
Anchor
-
HARD WALL MOUNTING CONCRETE
Drill 3/16″ (5mm) pilot holes. insert anchor and secure with screws.
This gate must only be fixed to a solid and secure surface. If unsure, check with a qualified builder or trades person that the installation you intend is suitable and safe within the chosen location.
TOOLS PREPARATION:
PLEASE SELECT THE PROPER ACCESSORIES AND A SUITABLE WALL. 
MEASUREMENT PREPARATION
Measure the door width to ensure that the gate can be installed normally.
WHAT’S IN THE BOX
PARTS 
Installation
GATE PLACEMENT
SUITABLE PLACEMENT OF GATE AND CATCH MOUNT
Inside Opening or Doorway 
Auto lock period
After release it will automatically and rebound to the locked state.
INSTALLATION STEPS
Note:
Thank you very much for purchasing this product. The whole installation
process takes about 20 minutes. Please read the installation manual
carefully,find the corresponding components and select the right location to
be installed. Please prepare an electric drill, a mark pen and a screw driver.
The product must be installed on the ground to better realize the separation
function.
- Main body Gate.
- Install the two Brackets on the Gate
- Peel off the Paper of Adhesive tape from the two Brackets
- Select the Installation location, make sure the bottom of the main body door Gate is on the ground.
- Select the installation location, make sure the bottom of main body door gate is on ground If there are baseboard on the wall. pies slide lower Bracket up to the suitable position until go around the baseboard
- Take out door gate from the 2 brackets according to the arrow •
- Mark the holes position of the two brackets and then pull out the two brackets from wall
- Drill holes of with an electric drill as the marks
- lnsert the expansion glues to all holes
- Drill the two Brackets to wall as the holes .
- Install Gate to upper Bracket as the arrow
- Install Gate to Lower Bracket as the arrow, please make sure Install Gate to upper Bracket at first then install Gate to Lower Bracket .
- Press & Push the button to unlock.
- Pull the cloth horizontally to the opposite door frame to find the Installation position of lower Latches
- Hook the lower Latch and mark the holes position of the lower Latch with a pen and make sure the gate Is Vertical.
- Pull the cloth, Let the cloth roll back.
- Orgill holes of with an electric drill as the marks
- Insert the expansion glues to all holes
- Drill the lower Latch to wall as the marks
- Pull the cloth horizontally. Hook the lower latch.
- Push the bottom to lock.
- Pull the cloth horizontally to the opposite door frame to find the installation position of upper Latch
- Hook the upper Latch and mark the holes position of the upper Latch with a pen and make sure the gate Is Vertical.
- Press & Push the button to unlock.
- Pull the cloth, Let the cloth roll back.
- Drill holes of with an electric drill as the marks
- Insert the expansion glues to all holes
- Drill the upper Latch to wall as the marks
- The installation is complete, Enjoy your gate
- Enjoy your gate!
ADJUSTABLE LOWERGATE MOUNT
TO REMOVE
- Press the button
- When press the button and also put upward the gate from the Bracket at the same time.
Operation
HOW TO LOCK THE GATE 
Note: When gate is retracting always hold the handle and guide the gate evenly back into its original position. Never let go of handle when gate is retracting.
HOW TO OPEN THE GATE
Note: When gate is retracting always hold the handle and guide the gate evenly back into its original position. Never let go of handle when gate is retracting.
CLEANING INSTRUCTIONS
- Simply use a soft damp cloth to wipe gate, dry after cleaning.
- Do not use chemical or abrasive cleaners.
- Thank you very much for choosing our products. Please read instruction manuals carefully before using this retractable safety gate. Do not use if any part is Broken, Torn or Missing.
- Please retain the instruction manual for future reference.
MADE IN CHINA
Documents / Resources
|
Ghope SH20.006B03C Retractable Baby
Gates
[pdf] Instruction Manual
SH20.006B03C Retractable Baby Gates, SH20.006B03C, Retractable Baby Gates,
Baby Gates, Gates
---|---