Valor RSKUSU031B Bluetooth Speaker Instructions
- June 17, 2024
- Valor
Table of Contents
Valor RSKUSU031B Bluetooth Speaker Instructions
OPERATING INSTRUCTIONS
Products using the operating.
-
long press the on/off power button.
-
Short press to add the volume, long press to switch to the next song.
-
Short press to reduce the volume, long press to switch to a song.
-
Short press pause/play; double click to call.
-
Short -press function mode conversion, Two speakers , double-click any one TWS interconnection.
LED indicate
Bluetooth pairing status; Blue light flash.
Successful pairing: a voice prompt
Electrical status: charging indicator, red light is on. Charging completion: the red light is off.
Bluetooth connection radio
Connect the speaker to a Bluetooth enabled tablet or smartphone.
Turn on the speaker box, the voice prompt is Bluetooth play state, the blue light flash, then the speaker waits for pairing.
Go to settings on your device, turn on the Bluetooth function and gently search the Bluetooth device, find “SY-127” and click the connection. After the connection, the blue lights flash slowly with a prompt sound.
Note: if necessary, enter”0000”and clicks .
Bluetooth will automatically connect the last device before the shutdown, so after the restart, it will automatically connect to the previous device, without the need to match.
TF card play
Insert the TF voice prompt in the machine status. The music files in the TF card will play automatically.
Under the play state can control the play/pause, up/down, high volume is low.
Low-power state
When the battery power is less than 3.1V, it is regarded as low power state, Turn down automatically after low power. Do not boot again at this time, please charge in time.
Product charging
5V-1000mA It is suggested that the current specification of the charger is 5V/1000mA, and the red light is always on, and the red light is off after the charging.
Product peripherals interface
TF Card interface. Charging interface TYPE-C DC-5V 500mA-1000Ma
FCC warning statements
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>