DEESS GP590 Light Based Hair Removal Device USER MANUAL

DEESS GP590 Light-Based Hair Removal Device

Safety Precautions
Please first read these safety precautions carefully and then follow the user manual to operate. These safety precautions are to ensure the operation of the product is correct and safe, to prevent users or other people from personal injuries or property damage, and please make sure to follow them.

Operation Cautions

• Hair removal by lasers or intense pulse light sources can cause increased hair growth in some individuals. Based upon currently available data, the highest risk groups for this response are females of Mediterranean, Middle Eastern, and South Asian heritage treated on the face and neck. This group should be careful.

• Those people who have physical, mental disease or are under the treatment of dermatology are not recommended to use this product unless there is a specialized person to supervise or a dermatologist to provide guidance.

• Please keep the product far away from the children.

• The product should not be powered on without inserting lamp cap; and replace the lamp cap when the adapter is disconnected;

• During the operation, do not shield the air intake and ventilation holes to impact heat dispassion;

• For Hair Removal treatment, remember to shave the hair before treatment;
  During the treatment, it is normal to experience slight redness. It is recommended to use ice packs on the affected area;

• Before operation, use an alcohol cotton pad or swab to disinfect the surrounding areas of the lamp cap, but do not spray alcohol directly on the lamp cap;

• Please do not apply gel or other cosmetics on treated areas during the treatment to avoid destroying the device;

• Avoid exposure to ultraviolet light during the treatment period. Protect skin from sun exposure and computer radiation by applying skin moisturizer and sunscreen cream;

• After treatment, use alcohol cotton pad or swab to disinfect the surrounding areas of the lamp cap, but do not spray alcohol directly on the lamp cap;

• During treatment, if the hair or blot sticks onto the plastic of the lighting window edge, black spots will appear as a result. However, this will NOT affect product function and usage;

• After a long period of usage, it is normal for the walls of the lamp cap to darken; the device can still operate normally. If the functionality of The device is affected, kindly contact us and we will get our technician to diagnose and fix the problem;

• The product should not be used in the bathroom or during shower, nor any other places in which the device may be watered;

• If the device is accidentally soaked or has come into contact with water, please send it back to the factory for examination purposes. We will determine whether it is repairable;

• If the device is electrified when it is soaked, please power off the device before touching it for your safety;

• Avoid keeping it in places where there is strong magnetic field, electric wave occurrence or places with high temperatures;

• Please do not lash or knock strongly onto the device;

• Please do not use this product beyond the content of the instructions;

• Please do not use if a Light-based hair removal device is damaged; for example, cracked main body, cable damage (internal wires visible), cracked or broken glass on the main body, etc. Internal parts contain electric charges that are hazardous;

• Please do not charge the device with power supply that is outside the range of 100-240V. and do not continue to use the device when the power cord or power connector is broken, out of shape, or cracked;

• Do not allow service or maintenance the equipment while used in patient;

• The patient is an intended operator and can perform the maintenance the equipment;

• Please do not use too excessive length of cables and hoses to avoid strangulation;

• All materials in contact with the human body has been tested for biocompatibility and met the requirements of biological compatibility;

• The direct plug-in plug is considered as disconnect device, please do not place the equipment in a difficult operating position;

• If any operator requests more information such as circuit diagrams, parts list and product descriptions, for required carried out by qualified technical personnel, please get in touch with us;

• The minimum time required for the device to warm or cool from the storage temperature between uses until it is ready for intended use is 18 minutes;

• If any abnormality is found during use, please unplug the plug immediately;

• Except for DEESS-authorized personnel, no other party should attempt to disassemble the device. Please note that there is a risk of electric shock.

Eye Safety:
Light-based hair removal device emits flashes of Intense Pulsed Light. Though the Device has been tested and passed the international standards to ensure that its output are safe for your eyes, direct exposure is still potentially harmful to your eyes.
The Device can only be flashed (light emitted) if both skin sensors (inside the light-emitting window) detect a valid skin reading. However:

• DO NOT look directly into the light-emitting window of the Device when the Device has electrical power and is switched on.
• DO NOT attempt to flash (emit light) the Device towards the eye.
• DO NOT treat areas around the eye (eyebrows or eyelashes).
• ONLY attempt to flash the system Device when the light-emitting window of the Device is in good contact with the area you wish to treat.
• WE RECOMMEND you look away from the Device when firing onto your skin.

Contraindications

• Not for individuals under the age of 18. The effects of using the system in this age group are unknown.
• Not for pregnant or breastfeeding women, or during menstrual period;
• Not for individuals with scar diathesis;
• Not for individuals with photosensitization history or diabetes;
• Not for individuals with heart disease, hypertension, folliculitis, malignancy or anticoagulant obstacles.
• Not for individuals who have depilated in other methods in the past 6 weeks and used skin whitening products or products with vitamin A in the past 1 week;
• Not for individuals who have taken essential oil treatment at the same time;
• Not for individuals who have taken Aspirin, an immunosuppressant;
• Not for individuals who have been exposed to strong sunlight in the past 2 weeks;
• Not for sensitive areas, like mucosa, etc.; and private positions, like the upper eyelid, lip, nipple, and vagina etc.;
• Not for individuals with hirsutism and other diseases that may trigger complications.

EMC Statements

• Light-based hair removal device conforms to EMC requirements.
• User shall install and use per EMC information described in the attached materials.
• The portable and mobile RF communication equipment may affect the performance of the device, so please avoid strong electromagnetic interference when using, such as do not use it near phone, microwave and so on.
• The manual and manufacturer’s statement details are in the end of the article (AnnexI).

Introduction

Light-based hair removal device is powered by Intense Pulsed Light (IPL) derived from professional IPL technology, and the product is available at home or clinic. Light based hair removal device is an over-the-counter device intended for the removal of unwanted hair such as but not limited to small areas such as underarm and facial hair below the chin line and large areas such as legs, excluding patients with Fitzpatrick Skin Phototypes VI.

Packing List

What’s in the box?

• IPL Hair Removal Device: *1
• Charging Base: *1
• User Manual: *1
• Hair Removal Filter:*1
• Acne Treatment Filter: *1
• Skin Rejuvenation Filter: *1

Product Components Diagram

Technical Specifications
Light-based hair removal device is a filtered broadband Intense Pulsed Light (IPL) system with the following technical specifications:

Basic Specifications

Product Name| Light Based Hair Removal Device
Model| GP590
Type of Protection| BF Type, Class II
Level of Protection| IP22
Expected Service Life| 3 years
Applied Parts| Replaceable lamp
Output Specifications
Type of Light| Intense Pulsed Light (IPL)
Light Wavelength| 510 – 1100nm
Pulse Duration| 2 – 3milliseconds
Treatment Area (Spot Size)| 3.1cm2  (1.05cm × 2.95cm)
Treatment Level| 1 to 5
Level Energy(J±20%)| Level Ⅰ| Level Ⅱ| Level Ⅲ| Level Ⅳ| Level Ⅴ
8.88| 10.38| 11.88| 13.38| 14.88
Energy Density| 2.8 ~4.8Jcm2
Power Specifications
Main body| 24VDC, 4.0A
Adapter

(Approved adapter is specified as a part of ME Equipment)

| Input: 100-240VAC, 50/60Hz, 1.5A Max. Output: 24VDC, 4.0A
Lamp Cap specifications
Expected Service Life| Unlimited flash within 2 years since

the purchasing date.

Usage Specifications
Operation Environment| Temperature: 5~35℃ (41~95℉) Humidity: 25%~75%RH Barometric Pressure: 86~106kPa
Storage Environment| Temperature: 0~40℃ (32~104℉) Humidity:  25%~75%RH Barometric Pressure: 86~106kPa

How It Works

How Does IPL Work
Light based hair removal device is a Pulsed Light system which emits intense pulsed light (IPL) at a wavelength ranging from 510~1100nm. The device works on the principles of selective photothermolysis. That is, causing thermal damage to target chromophores by using light of appropriate wavelength in pulses that exceeds the chromophores’ thermal relaxation time but sparing normal skin by limiting the pulse width below the thermal relaxation time for skin.

What To Expect

• Immediately Post-Treatment
  You should not see any significant side effects from treatment (Refer to section 5.2 for more information on side effects). In the first few weeks following initial treatments, you will still see some hair growing. These are likely to be hairs that were missed during treatment i.e. they were lying dormant and not in their growth phase (Anagen) during treatment; when IPL is most effective.

• 6 weeks into the 12-week plan
  You should see a reduction in hair growth. However, many hairs may still not have been treated in their growth phase. It is important to continue the weekly treatments.

• After the 12-week plan
  Immediately after you have completed the 12-week plan you should see a significant reduction in hairs within the treated area. Any remaining hairs should be finer and lighter in colour. Continued monthly treatments, or treatments as required, should keep your skin hair-free.

How To Use

Preparation
Light-based hair removal devices should ideally to be used on small areas such as underarms and facial hair below the chin line, large area such as the legs.

Patch Test
Before actual treatment, please refer to the Recommended SKIN TONE Table (Section 4.2). Conduct a skin test on a small area HOW TO TEST

• Choose a small area on the arm. Use the LOW treatment level and follow the treatment instructions as required by the Recommended SKIN TONE Table but make sure to emit only 1~2 shots. Only if you feel comfortable, you can continue to reach the higher levels or the maximum. Stop the test once you do not feel comfortable, as increasing the level increases the risk of adverse effects. If there are any signs of swelling, burn mark, change in hair follicle, pain, or other unsuitable symptoms, please do not use this device until a thorough consultation a physician.
• If there is no skin abnormality after 24 hours, but you feel intense hotness during the treatment, then the last lower level is the most proper energy for your skin.

Recommended SKIN TONE
Various, but not recommended for dark skin, like the black skin. WE RECOMMEND you choose your skin tone based on the Fitzpatrick Prototyping Scale which was developed by Harvard Medical School dermatologist, Thomas Fitzpatrick, M.D., PhD to classy a person’s complexion and their tolerance of sunlight. The Scale includes six levels of skin tone. Please IDENTIFY your skin tone and check the following diagram to see whether the product is applicable.

Recommended SKIN TONE Table

mid-eastern skin type

| Very rarely burns, tans with easily| Applicable, but Caution
Type VI| Black| Never burns,

tans with easily

| Not

Applicable

NOTE

1. Choose the comfortable level according to your skin tolerance and increase level from one to five levels gradually. If there is not unsuitable or reaction, you could increase level gradually.
2. The colour of your skin may change, for example because your skin has been tanned: it may then be darker than the skin tone during the previous treatment. Therefore, you must check the settings to be used before each treatment and set the settings according to different treatment areas. Some areas may be darker than others.

Treatment Schedule

1. For optimal results, light based hair removal device should be used every week for 8 weeks to ensure all hair follicles are treated.
2. After the initial treatment phase (12 weekly treatments), to maintain treated results we recommend Light based hair removal device is used once a month, or as required.

Device Set-up

1. Remove light based hair removal device and its accessories from the gift box;
2. Make sure the device is clean, dry and intact before beginning the treatment: You can use alcohol cotton pad or swab to clean the light-emitting window. This isdone to prevent hairs and/or dust from appearing on the light-emitting window;
3. lug the base AC into an outlet and insert the DC plug to the device(as shown in fig.2). The power indicator will turn blinking blue. Light based hair removal device is now ready to be used.

NOTE

• Place the light based hair removal device on a table or area near an electrical wall outlet. Move away any liquids from the area.
• Make sure the lamp cap is installed well before turning on.

Preparing Yourself

1. Based on the Fitzpatrick Phototyping Scale, identify your skin tone and whether is suitable for; the details please refer to “4.2 Recommended SKIN TONE” in the USER MANUAL.
2. Before use, make sure your skin is in good condition without any injury and wound; as well as your skin is shaved, clean and dry (free of any residue such as powders, creams, makeup, antiperspirants, or deodorants);

Direction of Use
Hold the power button 3-5 seconds to start.

At this point:

• The indicator will blink in blue and white and after that the light will turn steady white.
• You can read the data of lamp functions, cooling status, flashes remaining, energy level from the LCD as shown in Fig. 4 .

Important NOTES:

• The default energy level is level 1.

• Hold the level button until the LCD shows an automatic light-emitting indication “ A ” (as shown in Fig. 4).
  Then the device enters to automatic flash mode, it will automatically release a flash without pressing the button once the skin is detected by the lamp.

• Hold the icy cool button to get into ice compress mode without flashing “ ” will light up.

• The device may get into overheat protection mode after working for a long time, (as shown in Fig. 4). At this point, the device is in self-protection status and will not be ready to work until the temperature is reduced and the signal disappears.

1. Short press the icy cool button to turn the cooling mode on/off “ ”. (As shown in Fig. 4.)

2. Short press the energy level to adjust the intensity ( turn up the intensity from level 1 to level 5 ). Please select the intensity based on your tolerance.

3. When the light-emitting window touch your skin properly, (As shown in Fig. 5.), the power indicator.will turn steady blue, indicating that it is ready to emit a light and you can short press the light emitting button to hair removal.

4. Press the light emitting button to hair removal, the device will flash a pulse of light onto your skin and make a subtle pop sound, which is a normal noise for the device. And then you may feel a mild sensation of warmth and tingling, which is normal response.

5. Move the light-emitting window to another area of skin. Use the pressure marks the device just made on your skin to guide you for proper positioning of the next pulse, avoiding gaps and overlaps between pulses.

6. When you have finished one expected area, repeat the operation for 2~3 times in order to achieve the optimal effect.
   Important NOTE:
   Two successive shots on small areas like underarm area or people with light skin tone, not suitable for people with dark skin tone or arms and legs.

7. After operation, long press the Power button for 3 to 5 seconds again to turn off the device and unplug the device after each treatment session. Please note that if the device is left idle for 5 minutes, device will automatically turn off.

8. After treatment and lamp cools down, use alcohol cotton pad or swab to disinfect the surrounding areas of the lamp cap, and then put the device and its accessories into the gift box as well as store it in safe place.

Replacement
Detach the lamp cap
Hold the lamp cap, pull as shown below to detach it from device.

Attach the lamp cap
Push the lamp as shown in the picture until the lamp is well installed.

Aftercare

Possible Side Effects
When using Light-based hair removal device according to the instructions for use, side effects are rare. However, every aesthetic procedure including the usage of home use devices may cause some degree of side effects. If any of the following conditions (refer to section 5.2 Side Effect Table) appear and last more than 24 hours, you should consult your physician or dermatologist.
Side Effect Table

The following side effects may have emerged during use.

Maintenance And Storage Cleaning

• Make sure to turn off and unplug IPL main body before cleaning.
• It is recommended to clean the light-emitting window before and after every session by using alcohol cotton pad or swab.
• Keep Light based hair removal device dry. Never submerge the device or any of its parts in water as if may lead to an electrocution risk. Storage
• To avoid breakage or missing device and its accessories, please store Light based hair removal device and its accessories in the gift box after each use.
• Clean the device before you store it and store it in a safe and protective place. Otherwise, it may affect the product function.

Trouble Shooting

When fault occurs during the usage of the instrument, users can follow the following guidance to eliminate some simple faults; if the problem cannot be solved after all steps are finished, please contact the Customer Service Department of the Company so as to solve faults as soon as possible.

• Failure of Start-Up
  Please check whether the adapter is connected well.

• Failure of Lighting
  Please make sure the light-emitting window touches skin properly, and whether the power/lighting indicator turns blue.

• If the blue indicator light up
  Please check whether there are metal parts or inductive capacitors around the sensor in the head of the device.

• If the LCE screen showed E0
  Something wrong with the fan. Please restart it after the device cooled down.

• If the LCE screen showed E1
  If something wrong with the voltage, defective, please contact customer service.

• If the LCE screen showed E2
  Please re install the lamp filter , plug in and start it again.

• If the issue can not be fixed.
  Please contact customer service and advise the related order NO. and purchasing date.We will get back to you at the earliest!

Disposal (End of Life)

DO NOT throw away the Light-based hair removal device with normal household waste at the end of its life, but hand it in to an official collection point for recycling (Contact your local town or city officials for recycling information). By doing this, you help to preserve the environment.

Executive Standards

Light-based hair removal device conforms to the following standards:

• IEC60601-1-2 Medical electrical equipment – Part 1-2: General requirements for basic safety and essential performance – Collateral standard: Electromagnetic compatibility – Requirements and tests.
• IEC60601-1 Medical electrical equipment – Part 1: General requirements for basic safety and essential performance.
• IEC60601-1-11 Medical electrical equipment – Part 1-11: General requirements for basic safety and essential performance – Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment.
• IEC60601-2-57 Medical electrical equipment –Part 2: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use.
• IEC62471 Photobiological Safety of Lamps and Lamp System.
• ISO10993-5 Biological Evaluation of Medical Devices –Part 5: Tests for In Vitro Cytotoxicity.
• ISO10993-10 Biological Evaluation of Medical Devices –Par t 10: Tests for

Warranty Contents

Disclaimer
SHENZHEN DEESS TECH CO., LTD reserves that the final explanation of Light- based hair removal device, any third party applies device-related information without DEESS’s authorization is not allowed, and we will take legal action. In any case, SHENZHEN DEESS TECH CO., LTD is not responsible for any consequences caused by improper use of consumers.

Warranty

Warranty Period
The warranty period of the product is 2 years from the date of purchase.

Warranty scope
If the instrument is within the warranty period, the Company will provide free maintenance or replacement of the product for you. Other faults resulted from abnormal use and force majeure is not within the warranty scope. (Note: the lamp cap is consumable, not within the scope of warranty.)

Warranty limits

• When applying for free maintenance for a product that is within the warranty period, Users should show the valid invoice. The warranty period for DEESS consumption products starts from the date of purchase which is shown in the invoice. If there is not purchase date, the warranty period starts from productiondate.
• Free maintenance is not provided for the damaged products that resulted from your improper placing when you are sending back the instrument.
• The instruments that are repaired by the maintenance center of DEESS and are still within the original warranty period can continue to enjoy the maintenance service provided from DEESS.
• After maintenance, the replaced faulty spare parts are reserved by DEESS.
• Users should keep the purchase invoice properly; no invoice will be reissued by DEESS.
• The Company is not responsible for the following situations and will not provide warranty service in case of the following situations:
  • Faults and damages resulted from the fire, earthquake, the behavior of a third party, fault or misuse caused by users, usage under other abnormal conditions and unpredictable events.
  • The attached damage caused by the usage of the products (such as loss of business benefit, interruption of business including the loss results from the usage of instrument and the cost resulted from the replacement of equipment, device or service, or the claim required by users).
  • Damage resulted from the operation which is beyond content of the Instruction.
  • Including: the Uncontrollable situations; the required service and parts for solving problems not sold by the Company; and the required service for solving problems resulted from the usage of accessories, fittings or substitutes that are not sold by the Company, and the required service for solving problems resulted from acceptableness orillegal disassembly and assembly of instrument without following the instructions.
  • Faults or damages resulted from the working environment which is not designed for the product, including overload.
  • Improper storage by users (such as damages caused by rats and liquid infiltration)

Support

Dear Customers: In order to provide you with more convenient services, when you buy Light based hair removal device, please consult according to below contact information if you have problems.

• Customer Service:
• Hot-line: +86 755 2383 2052 or 8832 2271.
• E-mail: mydeess@gsd.com.cn
• Mailing address: BUILDING A JUNSD HI-TECH PARK, WEST OF BAO’AN RD. WATCH & CLOCK BASE, GUANGMING DISTRICT, SHENZHEN, GUANGDONG, CHINA To obtain more services, please visit our website:www.mydeess.com

Symbols

Annex I: Manufacturer’s EMC Statement
Guidance and manufacturer´s declaration – electromagnetic emission – for all EQUIPMENT AND SYSTEMS

2

| The GP590 Light based hair removal device is intended

for use in the electromagnetic environment specified below. The customer or the user of GP590 Light based hair removal device should assure that it is used in such an environment.

3

|

Emissions test

|

Compliance

| Electromagnetic environment – guidance

4

|

RF emissions CISPR 11

|

Group 1

| The GP590 Light based hair removal device uses  RF energy only for its internal function. Therefor, its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment.

5

|

RF emissions CISPR 11

|

Class B

| The GP590 Light based hair removal device suitable for use in all establishments, including domestic establishments and those directly connected to the public low-voltage  power supply network that supplies buildings used for domestic purposes.

6

|

Harmonic emissions IEC 61000-3-2

|

Class A

7

|

Voltage fluctuations flicker emissions

IEC 61000-3-3

|

Complies

Guidance and manufacturer’s declaration – electromagnetic immunity – for all EQUIPMENT and SYSTEMS

Guidance and manufacturer´s declaration – electromagnetic immunity

The GP590 Light based hair removal device is intended for use in the electromagnetic environment specified below. The customer or the user of the GP590 Light based hair removal device should assure that it is used in such an environment.

Immunity test

|

IEC 60601

test level

|

Compliance level

|

Electromagnetic environment – guidance

Electrostatic discharge (ESD)

IEC 61000-4-2

|

±8kV contact

±15kV air

|

±8kV contact

±15kV air

| Floors should be wood, concrete or ceramic tile. If floors are covered with synthetic material, the relative humidity should be  at   least 30 %.

Electrostatic transient / burst

IEC 61000-4-4

| ±2kV for power supply lines

±1kV  for input

/output   lines

|

±2kV for power supply lines

|

Mains power quality should be that of a typical commercial or hospital environment.

Surge  IEC 61000-4-5| ±1kV differential mode

±2kV common mode

| ±1kV differential mode

±2kV common mode

|

Mains power quality should be that of  a  typical  commercial or hospital environment.

Voltage dips, short interruptions and voltage variations on power supply input lines

IEC 61000-4-11

| 0 % UT; 0,5 cycle

g) At 0°, 45°, 90°,

135°,  180°, 225°,

270° and 315°

0 % UT; 1 cycle and 70 % UT; 25/30 cycles Single phase: at 0°

0 % UT; 250/300

cycle

| 0% UT; 0,5 cycle

g) At 0°, 45°, 90°,

135°,  180°, 225°,

270° and 315°

0 % UT; 1 cycle and 70 % UT; 25/30 cycles Single phase: at 0°

0 % UT; 250/300

cycle

| Mains power quality should be that of a typical commercial or hospital environment. If the user of the GP590 Light based hair removal device requires continued operation during power mains interruptions, it is recommended that the GP590 Light based hair removal device be powered from an uninterruptible power supply  or a battery.
Power frequency (50/60 Hz)

magnetic field

IEC 61000-4-8

|

30A/m

|

30A/m

| Power frequency magnetic fields should be at levels characteristic of a typical location in a typical commercial or hospital environment.
NOTE  UT is the a. c. mains voltage prior to application of the test level.

Guidance and manufacturer´s declaration – electromagnetic immunity – for EQUIPMENT and SYSTEM that are not LIFE-SUPPORTING

Guidance and manufacturer´s declaration – electromagnetic immunity

The GP590 Light based hair removal device is intended for use in the electromagnetic environment specified below. The customer or the user of the GP590 Light based hair removal device should ensure that it is used in such an environment.

Immunity test

|

IEC 60601

test level

|

Compliance level

|

Electromagnetic environment – guidance

|

3 Vrms

|

3V

6V

10 V/m

|

Portable and mobile RF communications equipment should be used no closer to any part of the GP590 Light based hair removal device, including cables, than the recommended separation distance calculated from the equation applicable to the frequency of the transmitter.

Recommended separation distance

d =[ 3. 5 ]   P V 1

d =12] P

[

V 2

d =[ 3. 5 ]    P 80 MHz to 800 Mhz

E 1

d =[ 7  ]    P 800 MHz to 2.7 Ghz

E 1

Where p is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer and d is the recommended separation distance in metres (m).b
Field strengths from fixed RF transmitters, as determined by an electromagnetic site survey,a should be less than the compliance level in each  frequency range.b
Interference may occur in the vicinity of equipment marked with the following symbol:

Conducted RF

IEC 61000-4-6

| 150 kHz to 80 MHz

6 V in ISM and

| amateur radio
| bands between
| 0,15 MHz and
| 80 MHz
Radiated RF| 10 V/m
IEC 61000-4-3| 80 MHz to 2.7 GHz

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic is affected by absorption and reflection from structures, objects and people.

• The ISM (industrial, scientific and medical) bands between 150 kHz and 80 MHz are 6,765 MHz to 6,795 MHz; 13,553 MHz to 13,567 MHz; 26,957 MHz to 27,283 MHz; and 40,66 MHz to 40,70 MHz. The amateur radio bands between 0,15 MHz and 80 MHz are 1,8 MHz to 2,0 MHz, 3,5 MHz to 4,0 MHz, 5,3 MHz to 5,4 MHz, 7 MHz to 7,3 MHz, 10,1 MHz to 10,15 MHz, 14 MHz to 14,2 MHz, 18,07 MHz to 18,17 MHz, 21,0 MHz to 21,4 MHz, 24,89 MHz to 24,99 MHz, 28,0 MHz to 29,7 MHz and 50,0 MHz to 54,0 Mhz.
• Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the GP590 Light based hair removal device is used exceeds the applicable RF compliance level above, the GP590 Light based hair removal device should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as re-orienting or relocating the GP590 Light based hair removal device.
• Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3V/m.

Recommended separation distances between portable and mobile
RF communications equipment and the EQUIPMENT or SYSTEM – for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING

Recommended separation distances between portable and mobile RF communications equipment and the GP590 Light based hair removal device

The GP590 Light based hair removal device is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the GP590 Light based hair removal device can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the GP590 Light based hair removal device as recommended below, according to the maximum output power of the communications equipment.

Rated maximum output of transmitter

W

| Separation distance according to frequency of transmitter m
---|---
150 kHz

to 80 MHz outside ISM and amateur radio bands

d =[ 3. 5 ]   P V 1

| 150 kHz to

80 MHz

in ISM and amateur radio bands

d =12] P

[

V 2

|

80 MHz

to 800 MHz

d =[ 3. 5 ]   P E 1

|

800 MHz

to 2.7 GHz

d =[ 7  ]   P E 1

0.01| 0.12| 0.20| 0.035| 0.07
0.1| 0.38| 0.63| 0.11| 0.22
1| 1.2| 2.00| 0.35| 0.70
10| 3.8| 6.32| 0.10| 2.21
100| 12| 20.00| 35| 70
For transmitters rated at a maximum output power not listed above the recommended separation distance d in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where  P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.

NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.

Certificate of Quality

After inspection, this device meets all stipulated indicators under the product standard of Testing qualified, permitted to leave factory.
Light
Based Hair Removal Device.
Shenzhen GSD Tech Co.,Ltd.
Quality department
Inspection Date :
Add.: Building A, JUNSD Hi-Tech Park, Watch & Clock Base,Guangming District, Shenzhen, China
Service call: 86-755-23832052/88322271
Email: mydeess@gsd.com.cn
Website: www.mydeess.com

Guarantee Card
Dear Customer:
Thank you very much for using DEESS products.This couplet is considered as the warranty certificate. In order to enjoy DEESS superior after-sale service, please reserve it carefully, thanks!

Contact Name|
---|---
Phone| | Store Name|
Address|
Product Model| | Purchase Date| | Product Series No.|
Faults Description|
Maintenance

Feedback

|
Serviceman| | Tester| | Service Date|
Repair History|

Note:
DEESS guarantees 24 months from the purchase date (Not including some special parts, please find the details in the “Warranty” Part in the User Manual)

FAQs

What is the DEESS GP590 Light Based Hair Removal Device?

The DEESS GP590 Light Based Hair Removal Device is a cutting-edge hair removal tool that utilizes advanced light-based technology to remove unwanted body hair effectively.

What are the key features of the DEESS GP590 Light Based Hair Removal Device?

The DEESS GP590 features a large treatment window, adjustable energy levels, a skin tone sensor, and a compact, ergonomic design for comfortable and efficient hair removal.

How does the DEESS GP590 Light Based Hair Removal Device work?

The DEESS GP590 utilizes intense pulsed light (IPL) technology to target hair follicles' melanin, heating them to inhibit future hair growth without damaging surrounding skin.

Is the DEESS GP590 Light Based Hair Removal Device suitable for all skin tones?

Yes, the DEESS GP590 is equipped with a skin tone sensor that ensures safe and effective treatment across a wide range of skin tones.

How long does it take to see results with the DEESS GP590 Light Based Hair Removal Device?

Results vary depending on individual hair growth cycles, but many users report noticeable reduction in hair growth after just a few treatments with the DEESS GP590.

Can the DEESS GP590 Light Based Hair Removal Device be used on facial hair?

Yes, the DEESS GP590 is safe and effective for use on facial hair, including the upper lip, chin, and jawline.

Is the DEESS GP590 Light Based Hair Removal Device safe to use at home?

Yes, the DEESS GP590 is designed for safe and convenient use at home, providing professional-quality hair removal results without the need for salon visits.

How often should I use the DEESS GP590 Light Based Hair Removal Device?

For best results, it is recommended to use the DEESS GP590 once every 1-2 weeks initially, then as needed for maintenance once hair growth has significantly reduced.

Can the DEESS GP590 Light Based Hair Removal Device be used on all areas of the body?

Yes, the DEESS GP590 can be used on most areas of the body, including the legs, arms, underarms, bikini line, and more.

Are there any precautions to consider when using the DEESS GP590 Light Based Hair Removal Device?

It is important to read the user manual carefully and follow all safety instructions provided with the DEESS GP590 to ensure safe and effective treatment.

Can the DEESS GP590 Light Based Hair Removal Device be used by both men and women?

Yes, the DEESS GP590 is suitable for use by both men and women seeking long- lasting hair removal solutions.

How does the DEESS GP590 Light Based Hair Removal Device compare to other hair removal methods?

The DEESS GP590 offers a convenient and cost-effective alternative to traditional hair removal methods such as shaving, waxing, and epilating, providing longer-lasting results with fewer side effects.

Video-DEESS GP590 Light-Based Hair Removal Device

Download This Manual PDF:DEESS GP590 Light Based Hair Removal Device USER MANUAL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>