FISHER PAYKEL BGRV2-1236 36 Range Low Backguard User Guide
- June 17, 2024
- Fisher & Paykel
Table of Contents
FISHER PAYKEL BGRV2-1236 36 Range Low Backguard
Product Information
Specifications
- Model: BGRV2-1236
- Product Name: 36 Range Low Backguard
Dimensions
-
* Height: 11 13/32 inches- Width: 35 7/8 inches
- Depth: 1/2 inches
FEATURES
- Total Net Volume: Not specified
- Material: Stainless Steel
- Compatibility: Compatible with 36 V2 Professional Dual Fuel, Induction & Gas Ranges
- SKU: 71287
Note : The dimensions and specifications mentioned above are specific to
this product model. Please contact Fisher & Paykel’s Customer Care Centre to
verify the current dimensions and specifications for the available model.
© Fisher & Paykel Appliances Ltd 2020
Product Usage Instructions
Safety Precautions
Please follow these safety precautions before using the low blackguard:
- Ensure the low backguard is installed on a non-combustible surface.
- Do not use the low backguard in combustible situations.
- If a non-combustible surface is required, refer to BGRV2-3036H.
Installation
Follow these steps to install the low blackguard:
- Ensure the range is turned off and disconnected from the power source.
- Carefully align the low backguard with the back of the range.
- Secure the low backguard in place using the provided screws or mounting brackets.
- Double-check the stability and alignment of the low backguard.
Cleaning and Maintenance
To keep the low blackguard in good condition, follow these cleaning and maintenance guidelines:
- Regularly wipe the surface of the low backguard with a damp cloth and mild detergent.
- Avoid using abrasive cleaners or scrubbing pads that may damage the stainless steel surface.
- Inspect the low backguard for any signs of damage or loose screws. Tighten or replace as necessary.
Troubleshooting
If you encounter any issues with the low backguard, please refer to the troubleshooting section of your range’s user manual or contact Fisher & Paykel’s Customer Support for assistance.
Stainless steel low backguard for use with freestanding ranges. This backyard is not suitable for use in combustible situations. If a non-combustible surface if required refer to BGRV2-3036H. Compatible with 36″ V2 Professional Dual Fuel, Induction & Gas Ranges
DIMENSIONS
- Height 11 13/32
- Width 35 7/8
- Depth 1/2
- Total net volume inches
- SKU 71287
The product dimensions and specifications on this page apply to the specific product and model. Under our policy of continuous improvement, these dimensions and specifications may change at any time. You should therefore check with Fisher & Paykel’s Customer Care Centre to ensure this page correctly describes the model currently available. ? Fisher & Paykel Appliances Ltd 2020
A PEACE OF MIND SALE 24 Hours 7 Days a Week Customer Support T 1.888.936.7872 W www.fisherpaykel.com
FAQ
Q1: Can I use this low backguard with any range?
A1: No, this low backguard is specifically designed for use with 36 V2
Professional Dual Fuel, Induction & Gas Ranges.
Q2: Is the low backguard heat-resistant?
A2: Yes, the stainless steel material used in the low blackguard is heat-
resistant and suitable for use with ranges.
Q3: Can I install this low backguard by myself?
A3: While it is possible to install the low backguard on your own, we
recommend seeking professional assistance to ensure proper installation and
safety.
Q4: How do I clean the low backguard?
A4: Use a damp cloth with mild detergent to clean the surface of the low
backguard. Avoid using abrasive cleaners or scrubbing pads that may damage the
stainless steel.
Q5: Where can I find the model number of my range?
A5: The model number of your range can usually be found on a label located on
the side or back of the appliance.