iPETMON PTM-301 Smart Pet Feeder Instruction Manual

Smart Pet Feeder
Instructions

P TM- 301

Product introduction

Display function description

Product assembly

Remove the feeder and remove all accessories

1. Rotate the grain drum and the mixing base as shown in the figure

2. Rotate the grain drum and install the machine base according to the figure
   

3. Turn the machine upside down, insert the charging cable into the bottom of the machine, if you need to use the battery,Install 4 # 5 batteries as shown
   Note: Spare batteries are not included in the package
   

4. Put the machine in position and lift the front side of the machine. Insert the plastic food bowl Install the machine.

5. Pour in dry pet food, pay attention to the size of 4-12mm, Do not put wet food and dry food that exceeds the size

6. After filling the pet food, rotate and close the lid

Connect APP

1. The feeder supports 2.4GHz
   System requirementiPhone with iOS 10.0 or later, smartphone with Android 5.0 or later.

• Download the app from the IOS or Android APP Store: IPETMON or Tuya Smart or Smart Life Open the APP and make sure your phone is in a WIFI environment.
  Register according to the guidelines.

https://a.smart321.com/ipetmonsmartiot| https://smartapp.tuya.com/tuyasmart| https://smartapp.tuya.com/smartlife
---|---|---

Note:
Install APP and complete account registration, authorization is required. After entering your mobile number/email address, you will receive a verification code, which must be entered before proceeding with setting your account password.
2, confirm that the Bluetooth function on the phone is turned on, then connect the phone to the Wi-Fi network and enable the GPS location service.2, confirm that the Bluetooth function on the phone is turned on, then connect the phone to the Wi-Fi  network and enable the GPS location service.
3. To activate the feeder, first press and hold the unlock button for 3 seconds. Then, press the RESET icon to the right and hold it for 5 seconds, and you’ll notice that the WIFI icon will turn red and start flashing.
Note:
If you are using the battery as the sole power source for the feeder, the battery icon will be displayed.
4, in the app, find the “+” symbol on the right and click on it to add a new feeder to your account.
5. In the app, use the “Add Device” function to search for devices. Search for the device and click the “Add” button to continue.
6, when you connect to the network for the first time or switch to a new Wi-Fi network, you will be prompted to enter your Wi-Fi password. Please enter your password in the fields provided and click the “Next” button to continue.
7. Wait for the connection. The first conne -ction is slow.
8. After the connection is successfully established, click Finish to complete the connection.
You’ll notice that the WIFI icon on the device will turn white and stop blinking.

Attention:
When connecting the console to a power outlet, please note that the middle menu bar of the device will automatically display for 10 seconds without user interaction. When the b-attery is used as the only power supply, the entire screen will turn black after  30 seconds, to reactivate the screen, only need any button of the motor, it will light up again, it is rec-ommended to use the power cord to connect the product for the first time.

Manual feeding Settings

1. After the phone is connected, the Settings menu will be opened automatically.

2. Select the number of servings, then click the “Feed” option, and the feeder will p -roduce 8 servings.

Timed feeding setting

1. click the “feeding plan” option to enter the setting interface.Click the “Add” option to set the feeding schedule.
   

2. Select the number of feedings required during the week, select the feeding time, and specify the portion size for each feeding.
   After setting the feeding time, you will be given a schedule, as shown below:
   You can set the number of meals per day, a total of 10 meals, with a maximum of 36 servings per meal.
   

View feeding records

1. Click on the “Feeding Record” option to view this week’s log, which will show the record after each feeding.

Share the device

1. Enter the modification page and click the pencil icon in the upper right co -rner of the feeding interface.

2. Click “Share Device” to share this device with your family and friends.
   

Removal device

On the Device list screen, press and hold the desired device for 3 seconds to access the Remove Device screen. Select the device you want to remove, and then click the Remove Device button.

WiFi instruction

Battery display

When the battery is fully charged, the battery icon is white.
If the battery charge is low, the icon blinks.
If you notice the battery icon blinking, it means the battery needs to be replaced.

Product cleaning

1. Remove the charging cable before cleaning.

2. Open the grain storage bin, take it down, and pour out the remaining cat food.
   

3. Press the A key as shown, rotate and remove the grain storage bucket

4. Clean the food basin, grain storage bucket, stainless steel bowl and bowl holder.
   

5. The base of the machine can only be cleaned with a soft dry cloth, and these parts are not waterproofThen air dry or wipe dry.

Product parameter

Precautions for use

1. this feeder is recommended for pets over 6 months old.
2. this feeder is designed for indoor use only, to avoid direct sunlight and away from any potential fire or heat source.
3. please use the adapter provided with this product to power the feeder. Using any other adapter may result in machine failure or damage.
4. do not immerse the host in water or other liquids, it is important to keep the host dry.
5. In order to prevent pets from knocking over the feeder, it is recommended to place it against a wall or in a safe location.
6. children should use the feeder under adult supervision and guidance to ensure safe operation.
7. If the desiccant bag is found damaged, please stop using it immediately. Contact us for a replacement desiccant bag.
8. If you decide to stop using the feeder, remember to unplug the power cord and remove the battery located at the bottom of the feeder.

Warranty

Pause the battery and use the charging cable to see
if it can continue to work
Unplug the cord, use the new battery, see if it works
No screen response| Hold down for 3 seconds to unlock the display
Machine card or display
is not bright| Check that the storage drum and outlet are kept dry
Check that food is kept dry. Do not use wet food
lf you are not using the power cord, replace the battery

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part  15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be  determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located for operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>