ADESSO KB-156A2 2000W Steam Iron Instruction Manual

June 17, 2024
Adesso

ADESSO KB-156A2 2000W Steam Iron

ADESSO KB-156A2 2000W Steam Iron

Important Information

Please keep your sales docket, including cash register receipt, in a safe place as the docket will prove the commencement of the period of this warranty. If you wish to make a claim specifically under this manufacturer’s warranty, you will be required to provide proof of purchase, preferably your sales docket.

IMPORTANT SAFETY INSTRUCTIONS

Please read these instructions carefully before using the appliance for the first time.

  • Always use the iron from a power outlet of the same voltage (A.C. only) marked on the iron.
  • This iron includes an earthed pin and must be used with a power outlet with earthed connection.
  • Always turn the power off at the power outlet before you insert or remove a plug. Remove by grasping the plug – do not pull on the cord.
  • Turn the power off and remove the plug when the iron is not in use and before filling or emptying the water tank.
  • Do not use the appliance with an extension power board.
  • If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
  • The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
  • The iron shall not be operated by means of an external timer or separate remote control system.
  • Do not let the power cord of the iron hang over the edge of a table or bench top or touch any hot surface.
  • Do not place the iron on or near a hot gas flame, electric element or on a heated oven. Do not place on top of any other appliance.
  • For additional protection, it is recommended to  use iron with a residual current device (safety switch) with a tripping current not exceeding 30mA in the power socket which supply power to the iron.
  • Iron only on an ironing board. The iron must be used and rested on a stable surface.
  • Allow the iron to cool completely before storing. Do not wind the cord around the soleplate while the iron is still hot.
  • Do not leave the power cord near the edge of a bench top where children may touch or pull it.
  • Children should be supervise to ensure that they do not play with the iron. Close supervision is necessary when iron is used near children.
  • Do not immerse the iron in water or any other liquid.
  • This iron is not suitable for use by persons (including children) who have limited physical, sensory or mental abilities, or by persons who have a lack of experience and/or lack of knowledge unless they are supervised by a person in charge for their security or receive instructions by them on how to use the iron.
  • Never leave the iron unattended while in use.
  • Do not use the iron for any purpose other than its intended use.
  • The iron is for household use only and should not be used outdoors.
  • Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner. Return the appliance to the nearest authorised service facility for examination, repair or electrical or mechanical adjustment.
  • Do not touch the soleplate of the iron if it is hot.
  • Always hold the appliance by the handle.
  • Keep the appliance well away from surfaces and objects that can be damaged by heat.
  • Ensure there is adequate room to operate the iron.
  • Ensure that the iron cannot fall into water.
  • Do not use the iron if water is leaking from it.
  • Do not use this iron for professional laundry .
  • Do NOT use this appliance for any purpose not covered by the instructions.
  • IMPORTANT: Always ensure that the steam control is in the ‘0’ (steam off) position when filling or re-filling with water. The steam control should remain in the ‘0’ position until the iron has heated up to avoid water leaking.

CONTROLS AND FEATURES

  1. Spray nozzle
  2. Water filler cap
  3. Steam control
  4. Power steam button
  5. Spray button
  6. Handle6.
  7. Power cord
  8. Temperature light
  9. Temperature control
  10. Self-cleaning button
  11. Maximum water level mark
  12. Soleplate
    Controls And Features

UNPACKING

Unpack the iron from the carton.
Retain the carton and packing for future use. If you have to dispose of the carton and packing, please do so responsibly.
The carton should contain –
1 x KB-156A2 iron.
1 x Filling cup.
1 x Owner’s handbook.

BEFORE YOU START

Location for ironing
Always iron on an ironing board that has an area to stand the  iron safely when not in use. Never iron on furniture, carpets or heat-sensitive surfaces as the heat of the iron will damage the ironing surface. Never iron clothes on the body.
When setting up your ironing board, find a location where there  is enough space around the ironing board for you to reach with your iron. Ensure that the cable can easily reach a power outlet from all positions on the ironing board and that the cable will not be a hazard to people or pets.
Always keep children and pets away from the area when you are ironing.
Taking care of your iron when ironing
The surface of the soleplate has a special coating for smooth ironing. Never iron over hard or metal objects such as zips, buttons or metal surfaces on the ironing board as this may scratch the coitizing

OPERATION

First use

Before using your iron for the first time you should ensure that it is thoroughly cleaned.

  • Wipe the soleplate before first use with a clean, soft cloth to ensure the soleplate is clean. Your iron is now ready.

Ironing temperatures

Most garments have an iron temperature marking on a label or tab.

Marking|
---|---
| Do not iron.
| Acrylic, rayon. Low temperature.
| Silk, wool. Medium temperature.
| Cotton, linen. High temperature.

The temperature control on the iron is marked with the corresponding and symbols.

The temperature control is also marked for different fabrics. If  you have garments that have no iron temperature label, set the temperature control using the fabric marking on the dial. For mixed fabrics, set the lower temperature.

Sorting your garments for ironing

Before starting to iron, check the markings on the garments and sort the clothing and fabrics into groups which need different temperature settings. Always iron the lowest temperature items first as the iron will heat up quicker than cooling down.

Steam ironing

Steam ironing works by generating a cushion of steam under the iron. Most garments are suitable for steam ironing though some exceptions are pure wool, velvet and corduroy garments.

  • Check that the iron is disconnected from mains power.

  • Turn the steam control to the ‘0’ (steam off) position.

  • Open the water filler cap.

  • Position the iron so that the filler inlet is vertical and fill with fresh, clean water from the filler cup (supplied) to the Max level mark on the iron. Never overfill the iron.
    Never use any perfumes or additives as these may damage the iron.

  • Close the water filler cap.

  • Turn the Temperature control to the temperature you want.

  • Stand the iron upright on the ironing board rest and connect the power cord to a mains power outlet.
    The temperature light will come on and the iron will heat up.
    When the iron reaches working temperature, the temperature light will switch off. The iron is now ready to use.
    The steam control will regulate the flow of steam when you are ironing.

  • Set the steam control to the level you want (mid-way is a
    good starting point).

  • You can now begin to iron your clothes.
    Steam will be generated when the iron is in the horizontal ironing position and will cut off when you stand the iron vertically. You can also shut off steam by turning the steam control to the ‘0’ position.

  • You can regulate the flow of steam during ironing with the steam control.

Everyone has their own techniques for ironing, but as a general rule, iron the larger areas first and work out into the corners of garments. Keep the iron moving at all times – the heat from a stationary iron will damage clothing.

Re-filling the tank

If you use all the water in the tank and want to continue ironing.

  • Turn the steam control to the ‘0’ (steam off) position.
  • Disconnect the iron from mains power.
  • Fill the iron as previously described

Dry ironing

  • To dry iron garments, follow the steps for steam ironing, but without filling the water tank.

SPECIAL FEATURES FOR STEAM IRONING

Power steam

  • Press and release the power steam button.

The iron will generate a strong shot of steam that will penetrate deep into the fabric.
If you need to repeat the process, wait four seconds.
Vertical ironing
The power steam feature can also be used with the iron held vertically. This can be helpful to remove wrinkles from curtains, wall-hangings etc.
CAUTION: Stand behind the iron at all times and keep it facing away from you.

  • Clear the working area of people and pets before starting.
  • Prepare the iron for steam ironing.
  • Hold the iron vertically, about 15-20 cm from the fabric to be ironed.
  • Press the power steam but

The iron will generate bursts of steam to iron the fabric.

Water spray

You can spray a jet or mist of water from the nozzle on the front of the iron.

  • Press the spray button down slowly.
    A jet of water will spray from the spray nozzle.

  • Press the spray button down quickly.

Water mist will be sprayed from the spray nozzle.

AFTER USE

  • Set the steam control to minimum.
  • Disconnect the iron from mains power.
  • Move the iron to a safe area away from children and pets and allow it to cool.
  • If the tank contains water, open the water filler cap and invert the iron to empty the tank.
  • Loosely coil the cable and store the iron safely out of reach of children.

CAUTION: Never wind the cable around the iron.

CARE AND CLEANING

Self-clean

The self-clean feature cleans out deposits that may have collected inside the iron. If the iron is in regular use, run self-cleaning twice a month.

  • Fill the iron with water as you would for steam ironing.

  • Turn the steam control to the ‘0’ (steam off) position.

  • Connect mains power.

  • Set the temperature control to maximum.
    Wait for the temperature light to go out.

  • Disconnect the iron from mains power and carry it to a sink.

  • Hold the iron horizontally over the sink and press the Self clean button for about 30 seconds.

  • Steam and water will flow from the soleplate.

  • Allow the iron to empty.

  • Release the self-clean button.

  • Allow the iron to cool before cleaning the body or storing it.

Main body

Always disconnect the iron from mains power and ensure it has cooled before cleaning it.

  • Wipe the main body and soleplate clean with a slightly damp cloth.
  • Dry thoroughly.

Never clean the iron with solvents or abrasive products.

SPECIFICATIONS

owner supply…………………………………………………..220 – 240V~, 50Hz
Power consumption………………………………………………………… 2000W
IMPORTANT: THIS APPLIANCE MUST BE EARTHED.

WARRANTY

  1. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled  to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Where a failure does not amount to a major failure, Woolworths is entitled to choose between providing you with a repair, replacement or refund. To obtain compensation, you would need to provide documentary evidence of the loss or damage suffered, and documentary evidence that such loss or damage was a reasonably foreseeable consequence of a failure by Woolworths to comply with a consumer guarantee under the Australian Consumer Law. Such evidence may include photographs, statutory declarations, receipts or reports (eg from your doctor), depending on the loss or damage.
  2. In addition to all rights and remedies to which you may be entitled under the Competition and Consumer Act 2010  (Commonwealth) and any other relevant legislation, the manufacturer warrants this product to be free from defects in materials or workmanship for a period of 12 months from the date of purchase.
  3. In order to claim under this warranty you will need to bring the product to any Woolworths store, along with proof of purchase (typically this will be a receipt). Any cost incurred by you in bringing the product to the service desk will be borne by you. We will then, at our option, either repair or replace the product, or refund your money and take back the product – in accordance with our Returns Policy, a copy of which is available at www.woolworths.com.au (and click on tab for About Us, Our Services, In Stores Services).
  4. Our liability under this manufacturer’s warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials, and was not caused by or substantially contributed to by other factors, or circumstances beyond our control, including (but not limited to) defective installation, maintenance or repair, alteration or modification of the product in a manner not recommended by the manufacturers or any neglect, misuse or excessive use.
  5. The benefits conferred by this manufacturer’s warranty are in addition to all rights and remedies conveyed by the Competition and Consumer Act 2010 (Commonwealth), and any other statutory rights to which you may already be entitled, and this warranty does not exclude, restrict or modify any such rights or remedies that are implied by law.
  6. This warranty is provided by Woolworths Limited of 1 Woolworths Way, Bella Vista NSW 2153, Phone: 1300 767 969.

Customer Support

Made for Woolworths 1 Woolworths Way Bella Vista NSW 2153 Australia

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals