Silumin 36 x 28 LED Bathroom Mirror Instruction Manual

Table of Contents

Silumin-36-x-28-LED-Bathroom-Mirror-product-1

Specifications

Installation Instructions

Before installation or maintenance, ensure electricity is switched off at the mains.
Decide the position of the hanging screws and mark this position on the wall using a pencil.
Install the hanging screws on the wall, leaving a 5mm screw head visible.
Connect and wrap the power according to the professional electrician’s standard.
Hang the mirror on the fixed hanging screws.
Ensure that the mirror is fixed firmly on the wall.

Mirror Light Three-Key Touch Switch Manual

Key 1

Click on/off for defogging.
Indicator light: 6000K cold indicator light is on; indicator light turns off when defogging is off; blue indicator light appears when in touch status.

Key 2

Click to adjust CCT (Cold light, Natural light, Warm light).
Long press to achieve infinite dimming when the light is on.
Indicator light: 6000K cold indicator light is on; indicator light turns off when CCT adjustment is off; blue indicator light appears when in touch status.

Key 3

Click on/off for LED strips. It has a soft start function. Long press to adjust brightness (10% -100%) with power off memory function.
Indicator light: 6000K cold indicator light is on.
When the light is off, the breath function will give out slow flashes of light on the button, which will help turn on the light in the dark.
Note: The light state of staying before turning off can be retained for continued activation after turning on the lights.

Maintenance

Do not clean the mirror with alkaline or acidic cleaners as they may corrode the mirror. Instead, use neutral cleaners or water.
Do not clean the back of the mirror, as it may void the reflective coating Made in China

FAQ

Q: Can I use this mirror with a voltage higher than 120V?

A: No, the maximum voltage supported by this mirror is 120V. Using a higher voltage may damage the product and pose a safety risk.

Q: Can I adjust the brightness of the LED strips?

A: Yes, you can adjust the brightness of the LED strips by long-pressing Key 3. The brightness can be adjusted from 10% to 100%.

Q: How do I clean the mirror?

A: Use neutral cleaners or water to clean the mirror. Avoid using alkaline or acidic cleaners, as they may corrode the mirror’s surface.
Do not clean the back of the mirror to prevent damage to the reflective coating.

Before installation or maintenance, ensure electricity is switched off at the mains.
Maximum voltage 120V 60HZ, LED 12W-72W
Decide the position of hanging screws and mark this position for installing screws by pencil.
Install the hanging screws on the wall leaving a 5mm screw head visible.
Connect and wrap the power according to the professional electrician’s standard, and hang the mirror on the fixed hanging screws.
Make sure the mirror is fixed firmly on the wall and installation is done.

Key 1 Click on/off for defogging
Indicator light: 6000K cold indicator light in the on status; indicator light turns off in the off status; blue indicator light appears when in the touch status.
Key 2 Click adjust CCT (Cold light, Natural light, Warm light)long press to achieve infinite dimming when the light is on
Indicator light: 6000K cold indicator light in the on status; indicator light turns off in the off status; blue indicator light appears when in the touch status.
Key 3 Click on/off for LED strips, It has a soft start function, long press to adjust brightness (10% -100%), with power off memory function.
Indicator light: 6000K cold indicator light in the on status;
When the light is off, the breath function will give out slow flashes of light on the button, which will help turn on the light in the dark.
With memory function. The light state staying before turning off can be retained for continued activation after turning on the lights
Maintenance: Do not clean the mirror with alkaline or acidic cleaners which will corrode the mirror, but use neutral Cleaners or water; Do not clean the back of the mirror, or the reflective coating may get voided.