KETELES XF4000 Electric Bike User Manual

KETELES XF4000 Electric Bike

Product Information

Specifications:

• Brand: KETELES
• Model: XF4000
• User Manual: www.keteles.com
• Warranty Period: Motor – 1 Year, Controller – 1 Year, Battery Charger – 1 Year, Switch – 1 Year, Display – 1 Year, Front Light – 1 Year, Frame – 1 Year, Suspension Fork – 1 Year, Handlebar – 2 Years

Product Usage Instructions

Smart Display Instruction

• To switch on and off the display, long press the power button for 3 seconds. Quick press the power button to check solo or total mileage. To switch speed grade, press the + or – button. At 0 grade mode, the motor does not work when you turn the throttle grip, and human riding has no electric power.
• For Speed, Grade 1-5, turn the throttle grip, and the motor works. PAS (Pedal Assist System) starts at the same time. Different assist and speed are matched according to the selected speed grade.
• The Cruise Control System allows for pure electric riding mode. During the riding process, turn the rotatable grip and long press the button for 5 seconds to enter cruise mode (instrument display Cruise sign). Brake cancels cruise. Note that cruise mode should be used in good road conditions with few pedestrians and vehicles on the road.
• For the normal use of each function, please ensure that the LED display works.

Assembly Instructions

The Carton of the E-bike

1. Open the Carton.
2. Take the bike and accessories out.
3. Remove the packing EPE pearl cotton.

Handlebar Installation

1. Turn the stem forward. Do not turn the whole fork. The fork brace should be facing forward.
2. Remove the 4 bolts.
3. Fit the stem and handlebar together.
4. Tighten the 4 bolts that hold the handlebar.
5. Tighten the bolts on the other side.

Saddle Installation

1. Open the lever and turn the nut to the loose seat post.
2. Insert the seat post into the seat tube clamp.
3. Lock the clamp lever tightly.

Front Wheel Installation

1. Turn the bike upside down.
2. Remove the fork spacer (it is not a part of the bike).
3. Put the front wheel on the fork.
4. Put the spacers and nuts in the right places.
5. Tighten the nuts on both sides.
6. Connect the inline connectors of the front motor cable.

Pedal Installation

1. The pedal with the letter L should be fixed on the left. Turn the spanner counter-clockwise to fix the pedal L.
2. The pedal with the letter R should be fixed on the right. Turn the spanner clockwise to fix the pedal R.

Fenders and Rear Rack Installation

1. Fix the Headlight and fender to the fork brace.
2. Fix the rear fender and rear rack to the frame.
3. Tighten the two upper bolts on both sides.
4. Tighten the two lower bolts on both sides.

Battery Installation

1. Install the battery.

Charging and Powering On
The charging port and the battery ON-OFF switch are located on the e-bike. Turn on the battery first, and then press the power button for 3 seconds to turn on/off the display. The multifunctional color LCD display is in the middle, and the cell phone holder has a USB charging port. Press + or – to change the speed grade. Twist the throttle to enjoy the fun of cycling.

FAQ

• Q: Where can I find the user manual?
  A: The user manual can be found at www.keteles.com.

• Q: How do I switch on/off the display?
  A: Long press the power button for 3 seconds to switch on/off the display.

• Q: How do I switch speed grades?
  A: Press the + or – button to switch speed grade.

• Q: How do I enter cruise mode?
  A: During the riding process, turn the rotatable grip and long press the button for 5 seconds to enter cruise mode. Brake cancels cruise.

• Q: How do I install the handlebar?
  A: Turn the stem forward, remove the 4 bolts, fit the stem and handlebar together, and tighten the 4 bolts that hold the handlebar.

• Q: How do I install the saddle?
  A: Open the lever and turn the nut to the loose seat post, insert the seat post into the seat tube clamp, and lock the clamp lever tightly.

• Q: How do I install the front wheel?
  A: Turn the bike upside down, remove the fork spacer, put the front wheel on the fork, put the spacers and nuts in the right places, tighten the nuts on both sides and connect the inline connectors of the front motor cable.

• Q: How do I install the pedals?
  A: The pedal with the letter L should be fixed on the left by turning the spanner counterclockwise. The pedal with the letter R should be fixed on the right by turning the spanner clockwise.

• Q: How do I install the fenders and rear rack?
  A: Fix the Headlight and fender to the fork brace. Fix the rear fender and rear rack to the frame. Tighten the two upper bolts on both sides and tighten the two lower bolts on both sides.

• Q: How do I install the battery?
  A: Follow the instructions provided in the user manual to install the battery.

ATTENTION: Please read this manual carefully before using the Lancet’s electric bicycle. If you do not understand this information, or if you do not cover the issues covered in this manual, please contact the dealer.

HELMETS SAVE LIVES!!

• ALWAYS WEAR A PROPERLY FITTED HELMET WHEN YOU RIDE YOUR BICYCLE.
• DO NOT RIDE AT NIGHT.
• CPSC RECORDS SHOW THAT ABOUT 35% OF BICYCLE-RELATED DEATHS OCCUR AFTER DARK.
• AVOID RIDING IN WET CONDITIONS.
• CPSC RECORDS SHOW THAT ABOUT 65% OF INJURIES HAPPEN TO CHILDREN UNDER 15 YEARS OF AGE.
• RIDE ONLY WITH ABULT SUPERVISION.

CORRE CTFITT- MAKE SURE YOUR HELMETCOVERS/OURFOREHEAD.

INCORRECT FITTING. FOREHEAD IS EXPOSED AND VULNERABLE TO SERIOUS INJURY.

Smart Display Instruction

• Switch on and off:  Long press the power button for 3 seconds to turn the display on / off. Quick press the power button to check solo / total mileage.
• Speed Grade: press the + / -button to switch the speed grade.
• Instructions: At 0-grade mode, this time, the motor does not work when you turn the throttle grip, and the human riding has no electric power.

Speed Grade 1-5 instruction
Speed Grade 1-5, turn the throttle grip, and the motor works ) and PAS starts at the same time. At this time , different assist and speed are matched according to the selected speed grade.

CRUISE CONTROL SYSTEM
Pure electric riding mode, during the riding process ( turn rotatable grip + long press-button for 5 seconds ) to enter cruise mode instrument display Cruise sign ). Brake cancels cruise ( Cruise mode needs to be used in good road conditions, with few pedestrians and vehicles on the road ).
Note: For the normal use of each function, please ensure that the LED display works.

INSTALLATION

Parts Warranty

Notes
The following conditions are not covered by the warranty:

1. Water damage of the battery, motor, and controller.
2. Man-made damage, self-modification, collision damage of spare parts, etc.
3. Tire puncture by sharp objects.
4. Test and dispose of the ebike for sale.
5. Products or accessories that are beyond the warranty period.
6. Improper use by the user resulted in damage to the bicycle and failure to follow the terminal’s instructions for repair and maintenance.
7. Poor and damaged due to natural disasters, man-made disasters, irresistible forces or chemical attack.
8. For accessories that do not need to be returned, proof materials such as videos or pictures cannot be provided.
9. Damage caused by modification or addition or subtraction of other accessories.
10. It is a vulnerable or consumable item in normal use (accessory coating, inner tube, thread tube, order piece, sprocket, chain, pedal). It is not covered by human injury, damage, normal wear and tear.

FAQs

Question 1: What does the display error code mean? What is the reason for it?
Answer: Except for communication errors which are actively reported by the display, all other error codes on the display are reported to the display by the controller, and the display shows them.

1. The communication error is because the display cannot detect a controller data reply within 10 seconds, Possible reasons:
2. The communication wire harness between the display and controller is not connected correctly or the wire harness is broken ;
3. The protocol between the controller and the display does not match ;
4. The communication wire of the display is burned;
5. Possible reasons of Hall sensor failure: ① The motor Hall sensor is damaged; ② The Hall sensor wire is connected incorrectly or not properly;
6. Possible causes of throttle failure: ① The throttle is not in place; ② The throttle is not connected properly; ③ The throttle is damaged;
7. The motor phase position loss. Possible reasons: ① The motor phase position wire is not connected properly or correctly; ② The motor phase position wire is short circuited;
8. Possible reasons of brake failure: ① Brake is not in place ② Brake is damaged or not connected.
9. Possible reason of controller failure: controller is damaged or MOS failure.
10. Possible reason of abnormal current: controller is damaged or MOS failure.

Error Code

The power assisted mode match with the gear shift to achieve the riding experience of labor-saving and power saving.
In the setting of power assist riding, on few slopes and good road conditions, it is recommended to match with variable gears, 7-6 high-speed gears, with the best power-saving effect and speed ratio. In case of large slope road conditions, gear 4-7 is adopted, which can easily and effortlessly climb the slope Riding with power assisted mode, if use speed shifting &climbing mode on flat road will waste electric power and accompany with the feeling of empty treading.

Maintenance and use skills of electric bicycle

The maintenance methods of electric bicycle under different use conditions mainly include the following points.

Influence of temperature
Temperature has an impact on the use of lithium batteries. Generally speaking, the impact on the use of lithium batteries at room temperature is not significant, but when the temperature is higher than 40″C or lower than-10’cthe discharge capacity of lithium batteries will change. For example, if the temperature is below 0’C in winter, the effect will be affected. When the battery is fully charged, the driving mileage will be shortened, because under this condition, the battery capacity can only be released by 60%70%. Therefore, the driving mileage when the battery is fully charged in winter will be much less than in summer.

Maintenance method

1. When the temperature is low in winter, the battery should be placed indoors, and the charging should also be carried out indoors. After the battery is fully charged, the charging time should be extended for another two hours
2. In summer, avoid the sun exposure of batteries. Avoid charging the battery at high temperatures. Avoid charging the battery immediately after use in high temperature Do not charge for too long. The battery needs to be charged for another one or two hour after the red indicator turns green
3. Avoid exposure to the sun and rain. Although the electric bicycle has good waterproof performance, it can still ride in rainy and snowy weather, but when passing through water puddles and ponding and other roads, pay attention to the wading height, which shall not be higher than the motor, to prevent the motor from damage caused by water inflow. Do not use a high-pressure water gun to wash the electric bicycle , to avoid damage caused by water entering the electronic parts and accessories
4. Frequent braking is bound to be accompanied by frequent start-up, which will lead to frequent large current discharge and power cut-off of the battery, which has a certain impact on its life .
   Countermeasures: pay attention to safety when driving , drive at a proper speed, and try to avoid frequent braking.

KETELES LIMITED
UNIT 1507B, 15/F., EASTCORE,398 KWUN TONG ROAD, KWUN TONG, KOWLOON HONG KONG
Whats APP 1: +86 13632624062
Whats APP 2: +44 07355779889
WWW.KETELES.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>