American DJ PAR-64 Lamp Gel Replacement Instruction Manual
- June 17, 2024
- American DJ
Table of Contents
PAR-64 Lamp Gel Replacement
Specifications
- Model: Par-46, Par-56, Par-64
- Lamp Type: Not specified, must be replaced with the same type
- Power Source: Must be connected to a power outlet
Product Usage – Lamp Replacement
Caution: Always disconnect the main power before attempting to replace the lamp.
- Disconnect the main power and allow ample time for the lamp to cool down.
- Pull the thumb knob located on the top of the unit.
- Slide the back end of the unit apart from the front half.
- Disconnect the old lamp from the socket.
- Squeeze the lamp retainer ring together and remove it to free the old lamp.
- Slide the old lamp out.
- Slide the new lamp into the socket.
- Reconnect the lamp to the socket.
- Replace the lamp retainer ring to secure the new lamp in place.
- Reconnect the back end to the front half of the unit.
Product Usage – Color Gel Replacement
- Press down on the gel release clip.
- While pressing down on the gel release clip, simply slide the color gel out.
FAQ (Frequently Asked Questions)
-
Q: What should I do before replacing the lamp?
A: Always disconnect the main power and allow ample time for the lamp to cool down before attempting to replace it. -
Q: Can I use a different type of lamp as a replacement?
A: No, always replace the lamp with the same type to ensure compatibility and proper functioning of the Par can. -
Q: Are lamps covered under warranty?
A: No, lamps are not covered under warranty conditions.
Par-46, 56, and 64
LAMP AND GEL REPLACEMENT
This Par can has been tested and the lamp has been installed at the factory. However, the lamp is not connected to the socket. You must remove the packing foam and connect the lamp to the sock-et. There is no power switch, after plugging the Par can in, it will light up. This Par can is fitted with a lamp which is highly susceptible to damage if improperly handled. Never move the fixture until the lamps have had ample time to cool. Remember, lamps are not covered under warranty conditions.
- WARNING! The Par can lamp is packed to protect against cracking during shipping. Please remember to remove all packing material before connecting to a power source.
- Lamp Replacement: Caution! Always disconnect the main power before attempting to replace the lamp. Remember always replace with the same type lamp.
WARNING! The Par can lamp is packed to protect against cracking during shipping. Please remember to remove all packing material and connect the lamp to the socket before connecting the Par can to a power source.
Color Gel Replacement
-
Press down on the gel release clip.
-
While pressing down on the gel release clip, simply slide the color gel out.
Lamp Replacement
- Disconnect the main power, and allow ample time for the lamp to cool.
- Pull the thumb knob located on the top of unit.
- Slide the back end apart from the front.
Lamp Replacement cont.
-
Disconnect the lamp from the socket.
-
Squeeze the lamp retainer ring together and remove it and “free” the lamp.
-
Slide the old lamp out.
-
Slide the new lamp in.
-
Reconnect the lamp to the socket.
-
Replace the lamp retainer ring to secure the lamp in place.
-
Reconnect the back end to the front half.
©American DJ®
A Division of the American DJ Group of Companies American DJ® World
Headquarters:
4295 Charter Street Los Angeles, CA 90058 USA
Tel: 323-582-2650 / Fax:
323-582-2610
Web: www.americandj.com / E-mail:
info@americandj.com