Tommee Tippee #0522145 pump and GO Pouch and Bottle Warmer Instruction Manual
- June 8, 2024
- Tommee Tippee
Table of Contents
pump and Go
Pouch and Bottle Warmer
INSTRUCTIONS FOR USE
US
Please read and retain this important information for future reference.
Distributed by;
Mayborn USA Inc., dba Mayborn Group
1 Edgewater Drive
Suite 109
Norwood, MA 02062
Copyright © Mayborn USA Inc. 2015
TOMMEE TIPPEE is a registered trademark.
Any questions?
Visit our website www.tommeetippee.com
Model Number: 1118
Voltage: 120v~60Hz 500W
Leaflet Number: 0522145
CAUTION
Always use on a flat heat-resistant surface. When in use the unit contains hot
water and steam. Extreme caution must be used when moving an appliance
containing hot oil or other hot liquids. Always keep the unit and its plug out
of reach of small children. Before plugging in the unit for the first time
ensure the voltage is compatible with your electricity supply by checking the
label on the base of the unit. The product has been fitted with a cord wind on
the base of the unit to allow you to adjust the length of the cord safely. It
is recommended that the cord be kept as short as possible. User maintenance
other than cleaning or descaling is not required for this product. This
appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. If the appliance is of the
grounded type, the extension cord should be a grounding-type 3-wire cord.
Always place the bottle or pouch into the warmer before adding the water.
Ensure water has been added to the unit before switching the unit on. When the
milk or food has reached the desired temperature, remove immediately. If left
in the warmer the temperature of the milk or food will continue to increase.
Ensure that the heating guidelines are followed to ensure that the food is not
heated for too long. For your child’s safety – Always check food temperature
before feeding by testing on a sensitive part of your skin.
IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS
Please ensure you read these instructions thoroughly and use the appliance in
accordance with instructions strictly. Please note misuse may lead to injury.
Do not touch hot surfaces, use handles, and knobs. To protect against fire,
electric shock, and injury to persons do not immerse cord, plugs, or other
parts of the unit in water or other liquid. Close supervision is necessary
when any appliance is used by or near children. Unplug from outlet when not in
use and before cleaning. Allow cooling before putting on or taking off parts
and before cleaning the appliance. Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions or has been damaged in any
manner. If the supply cord is damaged, it must be changed by a qualified
person in order to avoid a hazard. If the damage is from new, the unit must be
returned to the manufacturer. If within a retail warranty period and proof of
purchase retained; this product should be exchanged at place of purchase. The
manufacturer will then be made aware. The use of an accessory attachment is
not recommended by the appliance manufacturer as this may result in fire,
electric shock, or injury to persons. Do not use the outdoors. Do not let cord
hang over edge of table or counter or touch hot surfaces. To disconnect turn
any control ‘off” then remove the
plug from the wall outlet. Do not use appliance for anything other than
intended use.
SAVE THESE INSTRUCTIONS
Before serving, unplug cord from wall outlet and always be sure food is at
safe temperature before feeding. Do not leave cord within child’s reach. Do
not leave cord within child’s reach. A short power-supply cord (or detachable
power-supply cord) should be used to reduce the risk resulting from becoming
entangled in or tripping over a longer cord. Longer detachable power-supply
cords or extension cords are available and may be used if care is exercised in
their use. If a longer detachable power supply cord or extension cord is used:
The marked electrical rating of the cord set or extension cord should be at
least as great as the electrical rating of the appliance, and The cord should
be arranged so that it will not drape over the countertop or tabletop where it
can be pulled on by children or tripped over unintentionally. If the appliance
is of the grounded type, the extension cord should be a grounding-type 3-wire
cord.
TO ENSURE CONTINUED PROTECTION AGAINST RISK OF ELECTRIC SHOCK, CONNECT TO PROPERLY GROUNDED OUTLETS ONLY
1. SETUP
Please refer to the instructions leaflet before use and remember to clean and
descale your unit regularly
2. USAGE
For your child’s safety always check food temperature before feeding by
testing on a sensitive part of the skin
3. CLEANING & DESCALING
The descaling process will remove deposits of calcium and other minerals in the system that may affect its performance
CLEANING
After each use, unplug and allow to cool before cleaning. Pour away any excess
water and wipe with a damp cloth only. Do not clean with abrasive cleaners or
allow to come in to contact with solvents or harsh chemicals, damage could
result.
DESCALING
We recommend carrying out the descaling process approximately every 4-weeks.
If you notice limescale earlier than 4-weeks, descaling may be required
sooner. Living in a hard water area can produce limescale quicker than other
areas. You can find out your water quality via your water provider. You may
need to repeat either process if you find that limescale is still present.
Alternatively, you may wish to use a specific descaling solution suitable for
electric warmers if your build up is significant, you may need to use a
stronger solution.
There are two methods of descaling that you can follow for your warmer.
Option 1:
1. Empty the electric warmer and wipe down the inside with a clean sponge or
damp cloth.
2. Pour in 1 cup of white vinegar.
3. Leave for at least 30 minutes, or up to 24-hours depending on the extent
of the limescale.
4. Pour any remaining liquid down the sink. Rinse the interior of the warmer
well with cool water and use a clean sponge or damp cloth to remove any build-
up that came loose as a result of the descaling/cleaning process.
5. Plug unit back in and add regular amounts of water you use for normal
warming. Turn on and run for 5 minutes to remove any additional build-up. Upon
completion, rinse warmer again and use as directed.
Option 2:
1. Empty the electric warmer and wipe down the inside with a clean sponge or
damp cloth.
2. Pour in 1 cup of white vinegar.
3. Turn on the warmer and run for a cycle, approximately 5-minutes.
4. Unplug the unit and leave to cool, then pour any remaining liquid down the
sink. Rinse the interior of the warmer well, with cold water and use a clean
or damp cloth to remove any build-up that came loose as a result of the
descaling/cleaning process.
5. Plug unit back in and add regular amounts of water you use for normal
warming. Turn on and run for 5 minutes to remove any additional build-up. Upon
completion, rinse warmer again and use as directed.
Tommee Tippee #0522145 pump and GO Pouch and Bottle Warmer Instruction Manual
– Download [optimized]
Tommee Tippee #0522145 pump and GO Pouch and Bottle Warmer Instruction Manual
– Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>