OVELA OVTLSCPCRKB Telescopic Clothes Rack User Guide
- June 17, 2024
- OVELA
Table of Contents
OVTLSCPCRKB Telescopic Clothes Rack
User Guide
OVTLSCPCRKB Telescopic Clothes Rack
OVELA TELESCOPIC
CLOTHES RACK
OVTLSCPCRKB
SAFETY & WARNINGS
- Read all instructions in this guide before using this product. Retain this guide for future reference.
- Do not allow children to play with or climb on the clothes rack as doing so may cause injury.
- If using the clothes rack to dry clothes, assemble the rack in a horizontal position.
- If using the clothes rack to hang clothes, assemble the rack in a vertical position.
- Regularly inspect screws and retighten if loose.
- The maximum load for this clothes rack is 16kg.
- If the clothes rack shows any signs of damage, cease use immediately and contact help.Kogan.com for support.
- Regularly inspect the stainless steel to ensure it has not rusted.
- Do not use the clothes rack in strong winds or in rain.
- If the clothes rack is dirty, clean it with a damp cloth.
- Do not use detergents or oils to clean the clothes rack.
- Install the clothes rack on a flat surface.
SPECIFICATIONS
| Max assembled dimensions (L x H x W) | 220 x 310 x 58 cm |
|---|---|
| Min assembled dimensions (L x H x W) | 130 x 210 x 58 cm |
| Urit weight | 5.28 kg |
| Maximum weight capacity | 16 kg |
| Extendable rod maximum weight capacity | 8 kg |
COMPONENTS
ASSEMBLY
Notes:
- Ensure all parts are included before assembly.
- To avoid scratching the rack, assemble on it on a towel or blanket on flat ground.
- Assemble with care. Some force may be required to assemble sections; however, excessive force may lead to Product damage or scratches or the finish.
- Take care when extending the clothing rack tubes, as the joins can loosen if pulled too hard.
-
Unscrew the nut on part C. Attach part C to part E and screw in place.
-
Insert part D into part E.
Repeat steps 1 and 2 to assemble the other pole.
-
Attach part A to port E and part B to part D
-
Loosen the screw €op on part E and pull out the inner tube Adjust the height to 5cm taller than required and tighten the screw €op place port Ain the installation location
Repeat steps 4 for the second pole
- Lo0son the nut on port Cond odust to the requited height. Ensure both ends ore consistent and tighten the nut on part € to secure lace port F into the holes in part C
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your product, as well as any additional
assistance you may require,
head online to help.kogan.com.
K gan.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>