HAVIT HV1107MR11NW Mini Tivah Wall Light Instruction Manual

Mini Torah Wall Light
Instruction Manual

Product Specifications

Model No.| HV1007MRIINW| HV1027MRI 1 NW| I HVI107MRIINW| I HVI 127MR11NW| HVI 207MRIINW| I HV1227MRIINW
---|---|---|---|---|---|---
Name| Mini Torah
Material| 316 Stainless Steel| Aluminum| 316 Stainless Steel| Aluminum| 316 Stainless Steel| Aluminum
Colour| Stainless Steel| Black| Stainless Steel| Black| Stainless Steel| Black
IP Rating| IP65
Input Voltage| I2v DC (Requires External Power Supply)
Lamp Base| MRI 1
Lamp Wattage| 2x 3w| 1 x 3w| 1 x 3w
Lumens| 2x 270lm, 2x 300lm| 270lm, 3001m| 2701m, 300lm
Colour Temp| 3000k or 4000k
CRI| > 80
Dimmable| No (with globes supplied)
Warranty| 3 Years Replacement*

Important Safety Issues:

• This product must be installed by a qualified electrician according to ASINZS 3000.
• Ensure all electrical mains are disconnected before any installation.
• Do not exceed maximum wattage restrictions for globes: I 2V MR16 = 20w
• Modification of this product will void any warranty.
• Havit Lighting does not take responsibility for wrong installation, incorrect use, or use of installation material that does not belong to the system.
• When installing low voltage fittings, Voltage to fitting must be within .tor- 5% of the voltage required and cannot be installed more than 25m from LED Driver, if not within this allowance warranty will be voided.
• Aluminum and 304SS fittings must not be installed within 5km of any saltwater environments.
• All 316 stainless steel fittings must have regular cleaning maintenance to avoid any tea staining from forming on the fitting. (Warranty does not cover Tea Staining)
• All o-rings and seals must be in place correctly to maintain the warranty.
• These instructions may be updated at any time due to product improvements, Please visit the website for the most current installation instructions.

Steps for Installation:

1. Make sure that the electrical circuit is free of voltage (master switch off)
2. Loosen Allen screws on side of the base and separate the mounting bracket from the fitting.
3. Install the backing plate securely using appropriate screws for application, Seal all holes in the backing plate including cable entry and screw holes. Failure to do so will void the warranty.
4. Connect the cable – Connect the live and neutral wire to a suitable 12v DC LED Driver – (DO NOT CONNECT DIRECTLY TO 240V POWER)
5. Affix the fitting to the mounting bracket and tighten the screws, making sure these are tight to avoid any water penetration.
6. Apply a silicon seal around the whole base plate to avoid any water getting into electrical connections.
7. The fitting is supplied with both 3000k and 4000k globes, Select which color temperature you want to use, remove covers from the fitting by twisting anti-clockwise, and set them aside. Insert globes into the lamp holder by aligning pins with holes and push down gently.
8. Reattach covers by turning clockwise making sure the seals are still in place and caps are tight to avoid any water penetration.
9. All connections must be carried out carefully, inspect all contacts before switching back on the electric circuit.

Steps for Changing Globe:

1. Remove the cover by twisting anti-clockwise and set aside, remove the globe by grabbing the outside of the globe and pulling.
2. Re-insert the appropriate globe by inserting the 2 pins into the lamp holder and pushing down gently. (Make sure not to exceed max wattage, see product label for correct info.
3. Reattach the cover by turning clockwise making sure the seals are still in place and caps are tight to avoid any water penetration.

Must be installed by a licensed electrician

Contact Details:|
---|---
143 Beauchamp Road
Matraville NSW 2036
Australia| Tel: 02 9381 8300
Fax: 02 9666 8881
Email: sales@havit.com.au
Web: www.havit.com.au
Warranty Terms & Conditions*| Additional Information
---|---
|
https://havit.com.au/pages/warranty-terms-and-conditions| https://havit.com.au/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>