Volcan Energon 700 512Wh Portable Power Station User Manual

June 17, 2024
Volcan

**Volcan Energon 700 512Wh Portable Power Station User Manual

**

Thank You:
Thank you for choosing Energon 700 from Volcano to accompany your journeys.

As an emerging brand, we strive to break new ground and value diversity in our work, and we commit to enhance sustainable development with our green energy solutions and deliver a superior environmental protection experience for the world and families.

Product Specification

Appearance

Product Information

a . Product Parameter0s

Model| Energon700
Net Weight| 6.12KG
Dimensions (LWH)| 277.5180205mm
Battery Pack Capacity| 25.6V 512wh
Ambient Temperature Range by Charging| -5-45°C
Ambient Temperature Range by Discharging| -10-45°C
b.Output Port

AC Output Port 2 Pure Sine Wave| 700W (Peak Power: 1,400W) US/PSE: 100-110V/50-60HZ
CCC/EU: 200-140V/50-60HZ
Type C
2 (unidirectional)| TypeC-1: 100W
TypeC-2: 100W
USB 2 (unidirectional)| 18W
Car Socket
1| 120W max
DC5521 Output *2| 120W max
c.Input Port
AC Input| 500W Mains Charging
DC Input XT60 Port| 200W Solar Panel Charging
d.Battery Information

Life cycles

|
---|---
Lithium Iron Phosphate (LFP) Battery
4,000 cycles with battery capacity remaining above 80%
Protection Function| Over-voltage Protection
Over-load Protection
Over-temperature Protection
Short Circuit Protection
Low Temperature Protection
High Temperature Protection
Under voltage Protection
Over-current Protection
Disconnection Protection
Balance Protection

Get to Know Your Product

Power On & Usage

  1. It is recommended to fully charge your product before using for the first time.
  2. Power On Function: The LCD screen will light up by long pressing the power button for 3 seconds. When charging function is enabled, the charging indicator will light up, the charge column will flash, and the charge percentage will change with the change of the charging capaci- ty. Short press AC button to enable the AC function, and the corresponding AC icon will light up.
  3. DC Function: Short press the DC Button to use the DC Output Port; the button indicator will light up and the DC icon will display on the LCD Screen.
  4. Power Save Mode: Short press the Power Save Button to activate the mode; the green leaf icon will display on the LCD Screen; the product will automatically shut down after 1 hour of idle operation or operation with current less than 20mA.
  5. Manual Shutdown: Long press the Power Button of 3 seconds, the product shuts down, and the LCD Screen will automatically be off.
  6. Automatic Shutdown: The product will automatically shut down after 4 hours without load or operation with current less than 20mA. Note: Some products such as DC12V car refrigerator have intermittent power consumption, while, some products such as Bluetooth headsets have very low charging power, this product can be continuously powered.
  7. Overload Shutdown: When the AC output exceeds the overload protection power, the overload protection will be triggered. The port will disable the output, and can only be rebooted after removing the overload.
  8. Low Battery Shutdown: The product will automatically shut down when the battery is low, and it can be turned on after recharging.
  9. Over Temperature Shutdown: The product will shut down when it is beyond the range of allowable temperature. Do not use it in this case. The product should be placed in a ventilated environment at room temperature, please wait until the product temperature return to the normal range before using again.

ATTENTION
For Protection of battery , AC output will stop when battery remain 7% capacity.

Charging Your Product

  1. Charge through AC adapter 500w max, about 1.3 hours for a full charge;
  2. Charge through Solar XT60 adapter: 200w max, about 2.5 hours for a full charge;
  3. The new product we suggest full charge battery and use all capacity in the first time

Notes:
A. The battery is fully charged when all battery level segments stop blinking and remain solid. After the battery is fully charged it is best to unplug the charging cables. The battery will not over charge, but removing the cables is the best practice.

B. The actual solar panel charging efficiency can vary widely depending on weather, ambient temperature, sunlight’s strength, the angle that the solar panels face to the straight sunlight and other factors. The maximum output voltage of the solar panel should not exceed 23.5V. It is recom- mended to use solar panels with an open circuit output voltage of 10.8-23.5V.

LCD Screen

No      Function Display mode
1  Fan Indicator
2 Bluetooth Status
3 WIFI Connection
4 Fault Indication
5 High Temperature Alarm
6 Low Temperature Alarm
7 Battery Level Indicator
8 Remaining Battery
9 Remaining Charge/ Discharge Time
11 Input Power
12 Output Power Percentage
13 Output Power
14 Over-load Alarm
15 Solar Input
16 USB-A Output
17 USB-C Output
18 12V DC Output
19 AC Output
20 POWERSAVE

Connect Your Mobile APP
You can download the “Volcan Power” APP from iPhone APP Store or Google store

Safety Caution

Usage

  1. Do not place the product near heat sources during operation, such as fire or heating furnace.
  2. Do not immerse the product in water or get it wet. Keep it away from rainy or humid environment.
  3. Do not use the product in a strong static or magnetic environment.
  4. Do not disassemble the product in any way or pierce the product with sharp objects.
  5. To avoid short-circuiting, keep the product away from wires or other metal objects.
  6. Do not use unofficial components or accessories, including but not limited to adapters, charging cables, etc. To replace any components or accessories, official sales channels are recommended for relevant purchase information.
  7. Please strictly follow the ambient temperature specified in this user manual when using the product. If the temperature is too high, serious hazardous situations such as fire or explosion may occur. On the contrary, in too low temperature environment, the product performance may be severely impacted, even it stops working.
  8. Do not stack any heavy objects on the product.
  9. Do not hinder the fan from running during operation, nor place the product in unventilated or dusty area.
  10. Please avoid collision, dropping or severe vibration. If subjected to a severe external collision, you should turn off the power supply immediately and stop using the product. Make sure the product is well fastened during transportation to avoid vibration and collision.
  11. If accidentally drop the product into water while using, keep it away in a safe open area until it is completely dry. The dried product should not be used again, and should be properly disposed according to Section 3.2 below. If the product catches fire, it is recommended to use fire extinguishers in the following order: water or water mist, sand, fire blanket, dry powder, and carbon dioxide fire extinguisher.
  12. Use a dry cloth to clean off the dirt on product ports.
  13. Place the product on a flat surface to avoid damages from falling down. If the product flips over and is severely damaged, turn it off immediately, place it in an open area away from people or flammable materials, and dispose of it in accordance with local laws and regulations.
  14. Please keep this product away from children and pets.

Disposal

  1. Make sure that the battery is fully discharged before disposing of it in a designated battery recycling bin if it is possible. The product contains batteries with potentially hazardous chemicals; therefore, it is strictly prohibited to dispose of it in ordinary trash cans. Please follow the local laws and regulations regarding battery recycling and disposal.
  2. Do not dispose of the battery directly in the battery recycling bin if the battery cannot be fully discharged due to product failures. In such case, contact professional battery recycling authority for further processing.
  3. Over-discharged battery cannot be recharged, please disposed of it

ATTENTION:
If the ambient temperature is too high or the battery temperature is higher than 60°C (140°F) due to continuous high-power discharge, the product cannot be charged. When the battery temperature is less than 55°C(131°F), the charging function will automatically resume. If it is not used for a long time, it is best to fully charge it every three months before storing; It is best to fully charge each charging.

Fault Code & FAQ

Error Code

| Causes
DC output and car charging output overload
---|---
Error Code
E01
E02| DC short circuit and car charging short circuit overload
E03| AC output overload, overtemperature, overvoltage and undervoltage, short circuit
E04| PD (bidirectional) output short circuit, overload
E05| Battery over temperature
E06| Battery low temperature
E07| PD (unidirectional)/USBA short circuit, overload
E08| DC charging overvoltage
El 0| Battery overcurrent
El 1| Battery undervoltage alarm
Ell| Battery low voltage alarm
El 3| Prompting users to perform deep discharge and learn how to do it.

  1. Q: What type of battery does the product use?
    A: This product uses a high-quality cylindrical LiFePO4 cell.

  2. Q : What equipment can the AC output port of the product carry?
    A: The AC rated power of this product is 700w and the peak power is 1,400, which can supply power to some common appliances, but it is recommended to confirm the power of the appliance before use, and ensure that the sum of the power of all load equipment s less than the rated power.

  3. Q : How do know how long the product can be powered?
    A : The LCD screen of this product will display the remaining usage time, which can be considered as an estimation of the powering time for the product if the power consumption is stable.

  4. Q a: How to judge whether the product is charging?
    A : The product will display the charge column and flash when charging, meanwhile, the battery capacity percentage will also change, and display the input power

  5. Q : How to clean this product?
    A : You may wipe this product with a dry, soft, clean cloth or tissue.

  6. Q : How to store the product?
    A : When you store the product, please tur it off first, and then store it in a dry, ventilated place with room temperature. Do not place this product near water sources. For long-term storage, it is recommended to charge the battery to 80% every three moniths ta prolong the life of this product.

  7. Q : Can this product be taken on the plane?
    A No.
    081 Is the actual output capacity of the product consistent with the capacity stated in the user manual?
    A : The capacity indicated in the user manual is the rated capacity of the battery of this product. Since this product has a certain efficiency loss during charging and discharging process, the actual output capacity of the product is lower than the capacity specified in the user manual.

  8. Q : Why does the product make a “buzzing” sound when using?
    A : Because this product uses an air-cooling system, when the fan is working normally, it will make a slight sound. While, itis a normal phenomenon

  9. Q: Why I can not use the product within the rated output power range?
    a. Battery capacity is low and needs to be charged.
    b. The power of some devices at startup may be higher than the peak power of the product, or the actual power of the devices may be higher than the rated power of the product

  10. Q : Will the charger be damaged due to heat during use?
    A : when the charger is in normal use, there will be some slight heat, which is a normal phenomenon.

  11. Q : Is it possible to charge and discharge at the same time?
    A : Yes.

Laws, Regulations & Certification

Region Standard
Transportation DUN 38.3
North America Cell: UL 1642

Whole Machine: UL 2743
FCC Part 15B (If other wireless technologies such as Bluetooth and WIFI are included, other FCC parts will be involved)
Japan| Cell & Battery Pack: JIS C 62133
Whole Machine: JIS C 4412
EMC: J 55032
China| Battery Pack: GB 31241
Whole Machine: GB 4943.1
EMC: GB/T 92541 GB 17625.1
Europe| RoH5
Cell & Battery Pack: EN 62133-2
Whole Machine: EN 62368-1
EMC: EN 55032 EN 55035

Package Content

No Specification / Item Count
1 Host 1
2 Charge cable 1

For the power supply products purchased through regular channels, our company provides customers with warranty of 24 months from the date of purchase.

Note: Customers need to provide proof of purchase or other valid evidence when seeking warranty service

WARRANTY CARD

Appreciate your preference to our product at the beginning, and we will take responsible for the product quality since the moment you receive the unit. We promise to provide with services comply with the statutory standard of quality.

Product Model NO Product Serial NO.
Inspection Date Inspector’s Stamp
Customer Manufacturer

Effective with stamp only

Guarantee Regulations

  1. 2 year warranty since the date of purchase (refer to the invoice date)
  2. Free maintenance service provided under warranty except damage caused by nature disasters such as flood, fire, earthquake, etc.
  3. Under warranty, material and maintenance expense still will becharged accordingly as the situation listed below:
    a. There is no warranty card either the product couldn’t match the warranty card.
    b. Damage caused by improper use of the the product.
    c. Damage caused by unauthorized disassembling, repair or assembling.
    d. Damage caused by repair of unauthorized technician.

Notice

  • Properly storage and use would help to extend the lifespan of the product.Please operate according to the User Manual strictly under the
  • proper conditions.
  • Contact the distributor or us for product after-sale service.

Warranty Period

within 24 months from the date of purchase of this product, if the product is found to have any inherent quality problem or manufacturing defect, we will repair it for you free of charge. Replacement.

If the product cannot be repaired due to its own quality defects during the warranty period, we will provide you with a replacement product (not lower than the performance of the original product), and the warranty period of the replacement product is the remaining warranty period of the original product,

The following conditions are not covered by the warranty:

  1. Products purchased through informal purchase channels, or non-authentic products of our company;
  2. Giveaway and optional accessories;
  3. Normal appearance wear and tear during use;
  4. Misuse, abuse, accidental damage, intentional damage;
  5. Unauthorized disassembly and repair by unauthorized maintenance personnel;
  6. Problems caused by the use and storage not in accordance with the requirements of Chapter 2 and Chapter 3 of this manual, and failure to carry out troubleshooting as required in Chapter 5 of this manual.
  7. Damage caused by natural disasters, lightning, earthquake, tsunami and other irresistible factors.

Email:Support@volcancreative.com
Address: Volcan Creative INC 4045 Cheyenne Ct, Ste 104, Chino, CA 91710, Los Angeles, California

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals