BestEra 8802-M Executive Office Chair Instruction Manual
- June 17, 2024
- bestERA
Table of Contents
BestEra 8802-M Executive Office Chair
Scan the QR code to watch the instruction video.
Accessories List
Notice
If any questions, contact BestEra-service@outlook.com/BestEra-Spt@outlook.com.
- Do not stand in this chair or use the chair as a step ladder, use it as a chair only. This chair is designed for one person to use at a time.
- Do not use this chair unless all bolts, screws and knobs are firmly secured.
- Check all bolts, screws and knobs every 6 months. Tighten if any are loose.
- Failure to follow these instructions may result in serious injury or death of yourself and people around you.
- Some of the parts are heavy and/or have sharp edges, please install them carefully to avoid hurting you and the people around you.
Instructions For Use
Thanks for purchasing our products. Please read this manual before assembly. And please assemble in order. After the assembly, keep the instructions properly. Make sure all the parts are included ( 14 kinds in total).
Assembly Instruction
Step 1
Take out Split Base Tube (5), and Central Base Tube (6). Insert Split Base
Tube (5) into Central Base Tube (6) as shown. You can see there are screw
holes. Align with the holes, tighten Screws M6X20 (12) with Hexagon Wrench
(10) to fix 5 Spllit Base Tube (5) to Central Base Tube (6). Repeat it five
times.
Step 2
Take out Castors (9). Insert Castors (9) into part of Step 1 as shown. There
are 5 Castors (9) that need to be inserted. Take out Air Rod (8). Put Air Rod
(8) through Central Base Buckle (7) into the hole of Central Base Tube (6) as
shown.
Caution:
Confirm 5 Castors (9) must be inserted deeply. Otherwise, the castors could
easily fall out and the chair could fall.
Step 3
Fix the Base Plate (4) to the bottom of the Seat Cushion (2). Tighten the
Screws M6X25 (14) with Hexagon Wrench (10) firmly. Then insert the Air Rod (8)
into the Base Plate (4), the Base Plate (4) has holes in the middle. Press the
Seat Cushion (2) from top to bottom, with all the strength of your body.
Step 3
Tighten the Screw M8X25 (13) with a Hexagon Wrench (10) to fix the 2 Armrests
(3) on the Seat Cushion (2). Then fix the Backrest (1) between the 2 Armrests
(3) and the Seat Cushion (2) with Screw M8X25 (13). Tighten the 8 screws
firmly and then screws them with 8 Decoration Caps (11). The assembly is
complete now.
- Caution: Do not tighten the bolts before the product is fully assembled.
- Caution: Tighten the 8 Screws firmly and then cover the Screws with Decoration Caps (11). The assembly is complete now.
Warranty
Activate Your Warranty Now!
We guarantee you a pleasant buying experience. Please scan the QR code to
activate your warranty so that you can enjoy priority better after-sales
service.