bcp SKY6641 8x2x2 Oval Metal Garden Bed Instruction Manual
- June 17, 2024
- bcp
Table of Contents
bcp SKY6641 8x2x2 Oval Metal Garden Bed Instruction Manual
NOTICE
Please retain these instructions for future reference.
- Do not stand on or use any part of this item as a step
- Firmly secure all bolts, screws, and knobs before
- Reconfirm that all bolts, screws, and knobs are secure every 90
- Be aware that some parts are heavy and have sharp
- If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or factory replacement parts are
- Do not use this item in a way that is inconsistent with the manufacturer’s instructions as this could void the product
- This product contains small parts for Keep small children and pets away during assembly.
- This product is intended for residential use
TOOLS REQUIRED
HARDWARE
PARTS
PRODUCT ASSEMBLY
-
Connect two part A curved end panels with three part 1 screws , three part 2 wingnuts , and three part 3 washers. Leave the top two connector holes open.
Repeat to assemble the other end of the planter -
Connect two part A curved end panels with three part 1 screws , three part 2 wingnuts , and three part 3 washers. Leave the bottom two connector holes open.
Repeat to assemble the other end of the planter.
Overlap the open holes of the two end panel assemblies, then connect them with two part 1 screws , two part 2 wingnuts , and two part 3 washers
Repeat to assemble the other end of the planter.
-
Attach two part B side panels to the bottom of the one end panel assembly with three part 1 screws , three part 2 wingnuts , and three part 3 washers. Leave the top two connector holes open.
Repeat on the other end panel assembly -
Connect two part B side panels with three part 1 screws , three part 2 wingnuts , and three part 3 washers. Leave the top two connector holes open.
Attach this side panel assembly to the two end panel assemblies with six part 1 screws , six part 2 wingnuts , and six part 3 washers. Leave the top two connector holes open.
Repeat step 4 to attach the other side panel.
-
Attach two part B side panels to the top of the one end panel assembly and lower side panel with five part 1 screws , five part 2 wingnuts , and five part 3 washers. Overlap the open holes on the end panel and lower side panel before securing the screws.
-
Connect two part B side panels with three part 1 screws , three part 2 wingnuts , and three part 3 washers. Leave the bottom two connector holes open.
Attach this side panel assembly to the two end panel assemblies with ten part 1 screws , six part 2 wingnuts , and six part 3 washers. Overlap the open holes on the end panel and lower side panel before securing the screws.
-
Secure the center part B side panels with four part 1 screws , four part 2 wingnuts , and four
part 3 washers.
Locate the four central panels on both sides of the garden bed, then remove the screws, wingnuts, and washers from the second hole from the top of each panel.
-
Attach the four part C bracing rods with the eight part 1 screws , eight part 2 wingnuts , and eight part 3 washers removed in the previous step, two sets of hardware per bracing rod.
-
Place the part 4 rubber bumper onto the top edges of the assembled garden bed.
Question about your product? We’re here to help. Visit us at:
help.bestchoiceproducts.com
PRODUCT WARRANTY INFORMATION
All items can be returned for any reason within 60 days of the receipt and
will receive a full refund as long as the item is returned in its original
product packaging and all accessories from its original shipment are included.
All returned items will receive a full refund back to the original payment
method. All returned items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only
be provided by a Best Choice Products Customer Service Representative when the
return request is submitted. Items received without an RA may not be accepted
or may increase your return processing time. Once an item has been received by
Best Choice Products, refunds or replacements will be processed within 5
business days.
All returns must be shipped back to the Best Choice Products Return Center at
the customer’s expense. If the reason for return is a result of an error by
Best Choice Products then Best Choice Products will provide a pre-paid
shipping label via email. Boxes for return shipping will not be provided by
Best Choice Products, and is the customer’s responsibility to either use the
original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged
prior to its return. Items returned are not considered undamaged until they
are received by Best Choice Products and verified as such. All damages to
items are the customer’s responsibility until the item has been received by
and acknowledge by Best Choice Products as undamaged.
© 2023 Best Choice Products, Inc. All rights reserved. Distributed by Best
Choice Products, Inc. Tustin, CA 92780
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification, or neglect of this product.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>