HeeWing T2 Split Flap Installation Guide
- June 17, 2024
- HEEWING
Table of Contents
HeeWing T2 Split Flap Installation
Product Information
Specifications
- Product Name: T2 Split Flap
- Installation Manual Version: 1.0
- Materials Required: Servo, control horn, steel linkage, glue/hot melt glue
Product Usage Instructions
Section 1: Preparing the Servo and Linkage
- Prepare the servo, control horn, steel linkage, and glue/hot melt glue.
- Slot the steel linkage into the control horn.
Section 2: Attaching the Split Flap
- Apply glue to the area highlighted in Red.
- Slot the steel linkage into the opening beneath the split flap.
Section 3: Installing Control Horn and Gluing Side Walls
- Install the control horn into the provided slot, ensuring it is fully seated, and wait for the glue to dry.
- Apply glue to the side walls as shown for ease of removal when needed in the future.
Section 4: Connecting the Servo
- Slot the steel linkage into the servo horn.
- Install the servo into the provided bay.
- Connect the servo wire to the flap connector found inside Electronics Bay II. Repeat this step on the other wing.
FAQ (Frequently Asked Questions)
Q: What materials are required for the installation?
A: The materials required for installation include a servo, control horn, steel linkage, and glue/hot melt glue.
Q: Can the side walls be easily removed in the future?
A: Yes, by applying glue to the side walls as shown in the manual, they can be easily removed when needed in the future.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>