Aovpex 2700LM Sky LED Torchiere and Reading Floor Lamp User Manual
- June 17, 2024
- Aovpex
Table of Contents
User Manual
Sky LED Torchiere & Reading Floor Lamp
Introduction
Thank you for choosing this LED FLoor Lamp. Please read this user manual
carefully and keep it for future reference. If you need any assistance, please
contact us by email with your Amazon order number and details.
Package Contents
- 1x LEDFloorLamp
- 1x Lamp Base
- 1x UserManual
- 1x Reading Lamp
- 6 x Iron Pipes
- 1 x Remote Controller
- 1 x Power Adapter with Cable
Characteristics
- Brightness and color temperature ( CCT ) stepless adjusted.
- Memory function, restore to the luminance of last time close light when open light again, don’t need to repeat adjusting the light.
- Adjustable both of lamp head.
- Standalone reading lamp, which change CCT and luminance separately.
Product Structure
Installation
It’s very easy to install, as shown below:
Step 1: Connect the iron pipe with the light base by spinning clock wise.
Step 2: Then connect the iron pipe with the other iron pipes by spinning clock
wise.
Step3: At last, connect the iron pipe with the LED round light by spinning
clockwise. The installation is finished, then plug in adapter, you can touch
control or remote control the light.
Usage
There are two ways to control: Touch control or Remote control.
Touch control
Please touch the touch point to control the lamp.
The top touch point is for torchiere lamp and the down is for reading
lamp.
-
Turn ON:
Short press the touch area to turn on when the light is off. -
Adjust Color Temperature
Short press the touch area to change the color temperature (3000K-4000K- 6000k). -
“Brightness +/-” Setting:
Short press the touch area to chang the brightness when the light is 6000K. -
Turn OFF:
Short press the touch point after CCT of 6000K.
Remote Control
The remote distance is within 32.8 ft. It is magnetic so that you can put
it on whatever contain iron, such as the iron pipe, patch and so on. The left
key, which is black logo, is used for thorchiere lamp and the right , which is
white logo, is for reading lamp. Remote Control
| ON / OFF Button:
Short press this button to turn on the light, press it again to turn off.
---|---
| Ca-Color Temperature:
Short press this button to select the color temperature (3000k-6000k) after
turning on the light.
| Brightness +:
Hold the button to increase the brightness.
| Brightness -:
Hold the button to reduce the brightness.
How to match the lamp and remote control?
Make sure the remote control is matching the lamp : power plug in the lamp
, use the remote to control the lamp. Normarlly the remote controls the lamp
perfectly ;
If the torchiere or reading remote control doesn’t work, please re-match the
control ( torchiere lamp match by left key which is black logo and reading
lamp by right key which is white key).
Matching procedure :
- Press one power switch botton of the remote control, hold pressing until match successfully.
- Power plug in , then the light on automatically.
- Continue hold pressing the power switch buttom for seconds , when LED lights flashes , matching successfully.
How to adjust the lighting angle?
- Torchieve lamp: 350 degree adjustable lamp head.
- Reading lamp: 135 degree adjustable lamp head.
Product Care
- Please do not bend violently the lamp head to avoid damage when adjusting the angle of the amp.
- Please read the user manual before use.
- Suggest Indoor use. It is non waterproof. Do not use this product in humid environments or at high temperatures.
- Cut off the power when cleaning t or not using it.
- Please use the included power adapter, do not use other brand’s adapter. Do not plug or unplug the power cord with wet hands.
- Please stop use it f there is any defective ssues found in the product.
Guarantee
Aovpex@163.com
Remote Control Floor Uplight lamp is backed by 36 MONTHS product warranty. For
questions, assistance, or support, please contact the Customer Service with
your order number.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>