Craftsman 151.30383 15 Inch 5.5A Electric Line Trimmer Instruction Manual

15-inch 5.5A ELECTRIC
LiNE TRIMMER
Model No.
151.30383

WARNING: Toreduce the risk of injury, the user must read and understand the operator’s manual before using this product,
Sears Brands Management Corporation, Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.craftsman.com 
Save this manual for future reference

CRAFTSMAN LIMITED WARRANTY

FOR 2 YEARS from the date of sale, this product is warranted against defects in material or workmanship. WITH PROOF OF SALE, a defective product will be replaced free of charge.
For warranty coverage details to obtain free replacement, visit the web page: www.craftsman.com/warranty This warranty does not cover the spool of trimmer line or trimmer head spool cover, which are expendable parts that can wear out from normal use within the warranty period.
This warranty is void if this product is ever used while providing commercial services or if rented to another person.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears Brands Management Corporation, Hoffman Estates, IL 60179

INTRODUCTION

This 100l has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS
A IMPORTANT! When using electric gardening appliance, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury. For your own safety and bystanders please read these instructions before. operating the line trimmer. Do not use the line trimmer without reading the instruction sheet. Please keep the instructions safe for later use.
READ ALL INSTRUCTIONS

• This line trimmer is designed for cutting grass and similar soft vegetation and for trimming grass edges in private and hobby garden areas which are not acoessible with a line trimmer.

• The device is not allowed to be used in public gardens, parks, sports centers or at roadsides as well as in agriculture and forestry.

• This line trimmer is not allowed to be used for cutting or chopping, otherwise, there is a risk of injury:
  – Hedges, shrubs and bushes,
  – Flowers,
  – In terms of composting.

•  This line trimmer is not intended for use by persons (including children) with reduced physical, sensory or mental capabiliies, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• If the supply cord is damaged, stop using the unit. Take the unit to a qualified service dealer for inspection and possible repair using identical replacement parts.

• Wear protecive glasses or goggles.

• Never allow children or people unfamiliar with the instructions to use the line trimmer.

• Stop using the line trimmer while people, especially children, or pets are nearby.

• Only use the line trimmer in daylight or good artificial light.

• Before using the line trimmer and after any impact, check for signs of wear or damage and repair as necessary.

• Never operate the line timmer with damaged guards or without the guards in place.

• Keep hands and feet away from the cutting means at all times and especially when switching on the motor.

• Take care against injury from any devic fitted for trimming the filament line length. After extending new cutter line ahways retun the fine trimmer to its normal operating position before switching on. ‘ Never fit metal cutting elements.

• Never use replacement parts or aceessories not provided or recommended by the manufacturer. See the Parts Listin this manual for identical replacement parts.

• Disconnect the line trimmer from the power supply before checking, cleaning or working on the fine trimmer and when itis not in use.

• Always ensure that ventilation openings are kept clear of debris,

AADDITIONAL SAFETY INSTRUCTIONS FOR YOUR LINE TRIMMER

• Do not expose to moisture.
• Use only on AC mains supply voltage shown on the product rating label.
• Avoid operating your trimmer in wet grass, where feasible.
•  Take care in wet grass, you may lose your footing.
•  On slopes, be extra careful of your footing and wear nonslip footwear.
• Do not walk backwards when trimming, you could tip. Walk never run.
•  Switch off before pushing the trimmer over surfaces other than grass.
•  Never pick up or carry a trimmer by the cable.
• Do ot lean over the trimmer guard. Objects may be thrown by the cutting line. Keep all nuts, bolts and screws tight o be sure the wimmer is in safe working condition To avoid the risk of injury, keep fingers and hands clear of the line cut-off blade on the eading edge of the guard.
• Don’t Force Appliance – It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed; Don’t Overreach – Keep proper footing and balance at all imes; Stay Alert – Watch what you are doing. Use common sense. Do not operate appliance when you are tired.

MAINTENANCE

• After use, disconnect the machine from the mains and check for damage.

• When not in use store the machine out of the reach of children
  Electric powered trimmers should only be repaired by a qualified service dealer using identical replacement parts.

• Use only identical replacement parts as listed in the Parts List of this manual.
  The preparation for use, operation and maintenance of the appliance:

• Read the instructions carefully;

• Be familiar with the controls and proper use of the equipment;

• Before use check the supply and extension cord for signs of damage or ageing;

• – If the cord becomes damaged during use, disconnect the cord from the power supply immediately.
  DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY.

• Do not use the lawn trimmer (edge trimmer), if the cords are damaged or worn

warning!

• Cutting elements continue to rotate after the motor is switched off;
•  Keep extension cords away from cutting elements;
• Itis recommended that appliances should be supplied via a residual current device (RCD) with a tripping current of not more than 30mA,

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer

understand operator’s manual before using this product.
| Eye and Hearing Protection| Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection.
| Wet Conditions Alert| Do not expose to rain or use in damp locations.
| Keep Bystanders Away| Keep all bystanders at least 50 ft. away.
| Gloves| Wear non-slip, heavy-duty protective gloves when handling the hedge trimmer and the blade.
| Safety Footwear| Wear non-slip safety footwear when using this equipment.
| Electric Shock| Failure to use in dry conditions and to observe safe practices can result in electric shock.
| Long Hair| Failure to keep long hair away from the air inlet could result in personal injury.
| Loose Clothing| Failure to keep loose clothing from being drawn into air intake could result in personal injury.
.1

The following signal words and meanings are intended to explain the levels of risk associated with this product.

will result in death or serious injury.
****| WARNING| Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
| CAUTION| Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
| CAUTION| (Without Safety Alert Symbol) Indicates a situation that may result in property damage.
| WARNING| To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator’s manual. If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call the Customer Care Hot Line for assistance at 1-888-331-4569.

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Ahways use eye protection which is marked to comply with ANS1 Z87.1 )

FEATURES

PRODUCT SPECIFICATIONS

KNOW YOUR LINE TRIMMER
See Figure 1.
The safe use of this product requires an understanding of the information on the product and in this operator’s manual as wel as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
CORD RETAINER
A convenient cord retainer helps keep the extension cord connection secure during fine trimmer operation.
PIVOTING HEAD
Allows user to choose from 7 positions to maximize trimming or edging effectiveness.
AUXILIARY HANDLE
The line trimmer is equipped with an auxiliary front hande for ease of operation and to prevent ioss of control.
ROTATING MAIN HANDLE
The main handle on the trimmer can be rotated and locked into place for ease of use when edging
TELESCOPING SHAFT
The line trimmer can be adjusted to different lengths to accommodate the user’s height and comfort,
EDGING WHEELS
Dual all terrain edging wheels provide more stability while performing edging tasks.

ELECTRICAL INFORMATION

WARNING! To avoid electrical hazards, fire hazards, or damage to the tool, use proper ircuit protection. Your fine trimmer is wired at the factory for 120 v operation. Connect to a 120 v, 15 a circuit, and use a 15 a time- delayed fuse or circuit breaker. To avoid shock of fire, if the extension cord is worn, cut o damaged in any way, replace it immediately.
DOUBLE INSULATION
See Figure 2.
The line trimmer is double insulated to provide a  double thickness of insulation between you and the toof’s eleotrical system. All exposed metal parts are isolated from the internal metal motor components with protective insulation.
WARNING!

• ALTHOUGH THIS TOOL IS DOUBLE INSULATED, THE EXTENSION CORD AND RECEPTACLE MUST STILL BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR FROM ELECTRICAL SHOCK

• DOUBLE INSULATION DOES NOT TAKE THE PLACE OF NORMAL SAFETY PRECAUTIONS WHEN OPERATING THIS LINE TRIMMER
  **   WARNING!** TOAVOID ELECTROCUTION

•  Use only identical replacement parts when servicing a tool with double insulation. Servicing should be performed by a qualified technician

• Do not use in wet or damp areas or expose to rain

GROUNDING INSTRUCTIONS
IN THE EVENT OF AMALFUNCTION OR BREAKDOWN, grounding provides the path of least resistance for electric current, and reduces the risk of5 electric shock. This tool is equipped with a POLARIZED plug. The plug MUST be plugged into a matching grounded extension cord in accordance with Al local codes and ordinances. DO NOT MODIFY THE PLUG PROVIDED. If it will not ft the properly grounded extension cord, have the proper outlet installed by a qualified electrician
CAUTION! ALWAYS MAKE SURE THAT YOUR OUTLET IS PROPERLY GROUNDED. IF UNCERTAIN, HAVE IT CHECKED BY A CERTIFIED ELECTRICIAN.
WARNING! THIS LINE TRIMMER IS FOR OUTDOOR USE ONLY. DO NOT EXPOSE TO RAIN OR USE IN DAMP LOCATIONS:
GUIDELINES FOR USING EXTENSION CORDS USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition, When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause overheating. The table below shows. the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.
Minimum Gauge for Extension Cords (AWG) (when using 120V only)

Make sure your extension cord is properly wired and in good electiical condition. Always replace a damaged extension cord or have it repaired by a qualified person before use. Keep extension cords away from sharp objects, excessive heat and damp or wet areas Use a separate electrical circuit for your tools. This cirouit should comprise a wire of at least 12 gauge and should be protected with a 15 Atime-delayed fuse. Before connecting the motor to the power line, make sure the switch is in the OFF position and the electric current is identical to that stamped on the motor nameplate. Running at a lower voltage will damage the motor.
WARNING! ALTHOUGH THIS LINE TRIMMER IS DOUBLE INSULATED, THE EXTENSION CORD AND RECEPTACLE MUST STILL BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR FROM ELECTRICAL SHOCK,

ASSEMBLY

UNPACKING
This product requires assembly.

• Carefully remove the product and any acoessories. from the box. Make sure that all items listed in the packing list are included.
• Inspect the product carefully to make sure no. breakage or damage ocourred during shipping
• Do not discard the packaging material until you have carefully inspected and satisfactorily operated the product a If any parts are damaged or missing, do not operate the trimmer. Retur it for replacement to the retailer from which it was purchased.

PACKING LIST

• Line Trimmer
• Flower Guard
• Safety Guard with Sorews
• Auwilary Handle Assembly with Bolt and Nut
• Edging Wheel
• Operator’s Manual

WARNING! Before assembly, make sure
that the line trimmer is switched off and unplugged.
FITTING THE SAFETY GUARD
See Figure 3-4.
The Safety Guard prevents cut debris from fiying back at the opsrator.

• Fit the safety guard into the slots on the trimmer housing and line up the screw hole in the safety guard with the screw hole in the trimmer head,
• Install supplied screw and tighten by turning clockwise with a Philips screwdriver.

WARNING! The line cut-off blade on the safety guard is sharp. Avoid contact with the blade.
Failure to avoid contact can result in serious personal injury. Never use the fine trimmer unless the guard is properly ftted.
FITTING THE AUXILIARY HANDLE
See Figure 5-6.

• Loosen and remove the bolt from the hande.
• Place the handle on the line trimmer as shown.
•  Adjust the handle to the most comfortable position.
• Pass the bolt through the auxiliary handle and the main handle. Tighten the nut to secure. Do not overtighten the bolt.

FITTING THE EDGING WHEEL
See Figure 7.

• Slide the edging whe! into the slot located on the side of the motor housing. It will lock into place.

PREPARING THE TRIMMER FOR USE
See Figure 8-9.

• Press the rotational lock button and rotate the main handle counterclockwise. Release button when main handle has been rotated 180°.
• Turn the adjustment collar clockwise to unlock. You can siide the telescopic tube up or down to achieve the most comfortable working height
• Turn the adjustment collar counterclockwise til the shaft lock into place.

WARNING! fany parts are damaged or missing, do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury.
WARNING! Do not connect ta power supply until assembly is complete. Failure to comply could resultin accidental starting and possible serious personal injury.
WARNING! Never attempt to lock the switch trigger in the ON position.

OPERATION

STARTING/STOPPING THE TRIMMER
See Figure 10-11.

• Attach the outlet end of an extension cord to the plug on the rear of the line trimmer.
  NOTE: Use only approved outdoor extension cords.

• Route the extension cord through the slot located on the rear of the line trimmer housing and place undemeath the cord retainer.

• To start the line trimmer, squeeze the safety switch, then press the switch trigger

• To stop the line trimmer, release the switch trigger.

OPERATING THE TRIMMER
See Figure 12.

• Hold the line trimmer as shown
• Gently swing the trimmer from side to side
• In order to achieve optimum outting results, only out dry grass.
• When cutting long or thick grass, start at the top of the grass blades and gradually work down to the bottom
• If the line trimmer starts running slowly, reduce the amount of material you are trying to cut. IF GRASS BECOMES WRAPPED AROUND LINE HEAD SHAFT:
• Stop trimmer.
• Unplug the line trimmer.
• Remove the grass

ADJUSTING TRIMMER HEAD ANGLE
See Figure 13.
The trimmer head can be pivoted to seven different positions.

• Unplug the line trimmer.

• Push the pivot button and move the trimmer head up or down to one of the seven positions indicated by the notches.
  NOTE: Adjust the trimmer head to the first, second and third notehes for trimming and notches four, five, six and seven for edging, based on preferred trimming and edging position.

• Make sure the trimmer head is securely locked into place before resuming work

USING THE FLOWER GUARD
See Figure 14.
NOTE: The flower guard provides a visual indicator of the maximum reach of the trimming line.
When the flower guard is swung down, it can be used as a distance guide for use around plants, poles and fence posts.
ADVANCING LINES USING AUTO FEED
NOTE: The trimmer is equipped with an auto-feed head. DO NOT bump the head to try to advance the line as this will damage trimmer and void warranty.

• With the trimmer running but NOT trimming, release the switch trigger.
• Wait two seconds, and press the switch trigger.

NOTE: The line will extend approximately 3/16 in. with ach stop and start of the switch trigger until the line reaches the length of the line cut-off blade.

• Resume trimming.

ADVANCING THE LINES MANUALLY
See Figure 1.
NOTE: If lengthy line advancement s required, use the Advance Button found on the side of the trimmer head.

• Release the ON/OFF Switch Trigger to stop the unit, and unplug the trimmer
• Depress the manual advance button, and pull one or both of the two lines. The lines will advance 3/16 inch and stop. Push the button again to advance more line.
• Push the button and pulllines out as many times as it takes to reach the line cut-off blade. Always advance both fines to the same length.

ROTATING MAIN HANDLE
See Figure 15.
NOTE: The best method of edging is performed with the main handle rotated.

• Unplug the line trimmer.
• Press the rotational lock button and rotate the main handle clockwise.
• Release button when main handle has been rotated 180° to the edging position.

EDGING
See Figure 16-17

• The edging wheel provides stability and easier handling when using the trimmer to edge. Simply swing the edging wheel down from its storage position into edging position.

CARE AND MAINTENANCIE

Your line trimmer has been designed to operate over long period of time with a minimum of maintenance Continuous satisfactory operation depends upon proper tool care and regular cleaning.
WARNING! Before performing any maintenance, switch off and unplug the tool.

• Regularly olean the venilation siot in your line trimmer using a soft brush or dry cloth,
• Regularly olean the cutting line and spool using a soft brush or dry cloth,
• Regularly use a blunt scraper to remove grass and dirt from the underside of the guard.

WARNING! when serviong,ues only identical replacement parts. Use of any other parts may create a hazard or cause product damage.

SPOOL REPLACEMENT
See Figure 18.
–

• Use only round 065″ diameter monofilament line. Use original manufacturer’s replacement line for best performance.
• Unplug the fine trimmer.
• Push in tabs on side of spool cover.
•  Pull spool cover up to remove.
• Remove spool.
• To install the new spool, make sure the two lines are captured in the slots opposite each other on the. new spool. Make sure the end of each line is extended approximately 6 in. beyond each slot,
• Install the new spool so that the lines and siots align with the eyelets in the line head. Thread the lines into the eyelets,
• Pull the lines extending from the line head so the line releases from the slots in the spool.
•  Reinstall the spool cover by depressing tabs into slots in the line head and pushing down until spool cover alicks into place.
  NOTE: Replacement spool is available at SEARS; item # 71.99006

LINE REPLACEMENT
See Figure 19.

• Unplug the fine trimmer.

• Remove the spool from the line head.
  NOTE: Remove any old line remaining on the spool.

• Cut two pieces of line, each being approximately 9 fit (2.7 m) long. Use only .065 in. (1.65 mm) diameter monofilament line.

• Insert the first line into the anchor hole in the upper part of the spool. Wind the first line around the upper part of the spool clockwise, as shown by the arrows on the spool. Place line in the slot on upper spool flange, leaving about 6 in. (152 mm) extended beyond the siot.

• Do not overfil. After winding the line, there should be at least 1/4 in. (6 mm) between the wound line and the outside edge of the spool.

• Repeat above step with second line, using the bottom part of spool and the lower anchor hole. Do not overfill.

• Install the spool in the line head and replace the spool cover as described in Spool Replacement,

WARNING! Only use the appropriate type of cutting fine.
STORING THE TRIMMER

• Clean all foreign material from the trimmer.
• Store itin a place that is inaccessible to ohildren.
• Keep away from corrosive agents such as garden chemicals and de-icing salts.

TROUBLESHOOTING

If your line trimmer does not seem to operate properly. first consult the Troubleshooting Table below.
if the solution to your trimmer problem is not found in the Troubleshooting information, take the trimmer to a qualified service dealer for inspection and possible repair.
WARNING! Before proceeding, switch off and unplug

stuck together due to heat or
storage time.| 1. Unplug trimmer. Open spool cover. Remove
spool. Unwind line and then rewind onto spool.
2. Not enough line present in spool.| 2. Unplug trimmer. Open spool cover. Remove spool and replace with new line or new spool assembly as per instructions in this manual.
3. Lines are tangled on spool.| 3. Unplug trimmer. Open spool cover. Remove spool. Unwind and remove tangled line. Rewind line as per instructions in this manual.
Grass wraps around drive shaft housing and line head.| 1. Cutting tall grass at ground level.| 1. Cut tall grass from the top down to prevent wrapping.
Motor fails to start
when switch trigger is depressed.| 1. Power cord is not plugged in or connection is loose.| 1. Plug in the power cord.
2. Household circuit breaker is tripped.| 2.Check circuit breaker.
3.Extension cord may be faulty.| 3. Try another extension cord or connect into another wall receptacle socket on a different circuit.

CRAFTSMAN 15-inch LINE TRIMMER — MODEL NUMBER 151.30383
‘The model number will be found on a label attached to the motor housing.
TO PURCHASE REPLACEMENT PARTS, CALL 1-888-331-4569 CRAFTSMAN 15-inch LINE TRIMMER — MODEL NUMBER 151.30383
The model number will be found on a label attached to the motor housing.
TO PURCHASE REPLACEMENT PARTS, CALL 1-888-331-4569

See this section for all of the figures referenced in the operator’s manual.
A-Meain Handle
B – Safety Switch
G – ONIOFF Switch Trigger
D – Cord Retainer
E – Auxilary Handle
F – Bolt
G – Rotational Lock Button
H – Height Adjustment Locking Collar
I- Telescopic Shaft
J – Motor Housing
K – Flower Guard
L~ Trimiming Line
– Line Spool
N~ Safety Guard
– Edging Wheel
P – Pivot Bution
Q-Pover Plug
R – Advance Button

Product questions or problems?
1-888-331-4569
Customer Care Hot Line
Get answers to questions, troubleshoot problems, order parts, or schedule repair service.
To help us help you, register your product at www.craftsman.com/registration
Receive exclusive member benefits including special pricing and offers, project sharing, expert advice, and SHOP YOUR WAY REWARDS!
Join the Craftsman Club today!
www.craftsman.com/signup
Receive exclusive member benefits including special pricing and offers, project sharing, expert advice, and SHOP YOUR WAY REWARDS!
@ Registered Trademark ™ Trademark of KCO IP, LLC In the United States, or Sears Brands, LLC in other countries

References

• Home | CRAFTSMAN® | CRAFTSMAN
• Home | CRAFTSMAN® | CRAFTSMAN
• Create Account | CRAFTSMAN
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>