defender VOLT Gaming Desk User Manual
- June 17, 2024
- Defender
Table of Contents
defender VOLT Gaming Desk User Manual
Attention!
- Before assembly, check that all parts are included.
- Images are for general information purposes only and may vary.
- Do not use the table until all bolts are tightened.
- Check the bolts for tightness every 6 months
- Don’t put your feet on the table.
- Do not wash the table with water, use dry dust cleaning or wipe with a damp cloth.
SCOPE OF DELIVERY
| Part A – 2 pcs
---|---
| Part B – 2 pcs.
| Part C – 2 pcs.
| Part D – 1 piece
| Part D – 1 piece
| Part F – 1 piece
| Part G – 1 piece
| Part H – 2 pcs.
| Part 1 – 2 pcs.
| Part J – 2 pcs.
| Part K – 1 piece
| Part S1 (6 mm hexagon) – 1 pc.
| Part S2 (Hexagon 3 mm) – 1 pc.
| Part S4 (bolt M8x16) – 13 pcs.
| Part S5 (bolt M4x16) – 2 pcs.
| Part 56 (bolt M4x12) – 2 pcs.
| Part S7 (Screw M4x14) – 28 pcs
| Part S8 – 3 pcs.
| Part S9 (bolt M6x25) – 8 pcs.
| Part T (Cup holder) – 1 piece
|
| Part V (Wire holders) – 2 pcs
ASSEMBLY ORDER
- **
**
-
-
-
-
-
-
-
- 9a
-
-
-
-
-
-
-
After the table is installed, press the key to start
The table will automatically drop to the lowest point, stay fot 3 seconds, then rise to the highest point, and finally return to the initial position
**HOW TO USE
**
- Short press – automatic lifting. Hold – rises while the button is held. Hold for 3 seconds automatic rise to the position
- Short press – automatic lowering. Hold – lowers while the button is held. Hold for 3 seconds – automatic release to the bottom position
- Reset settings
- Saved height 1 – press and hold for 5 seconds to enter height in memory. Briefly press to return the table to position
- Saved height 2 – press and hold for 5 seconds to enter height in memory. Briefly press to return the table to position 2
WARRANTY SERVICE IS NOT EFFECTED IN THE FOLLOWING SITUATIONS:
- Expiration of the warranty period (warranty period is settled from the date of sale to the end user).
- Incorrect filling in of the warranty card.
- Incorrect plug in to power grid.
- Breach to safety of guarantee seals, fixing joint assemblies of the case; presence of elements of opening on outside and inside parts of the product.
- If the product designed for household use was used for professional purposes.
- Damage due to penetration of foreign objects, substances, liquids or insects inside the product.
- Damage due to breach to normal work of supply network – 220V +/- 10%. (except of automatic voltage regulators)
- If the product was opened and repaired by a person unauthorized for that by the dealer.
- Incorrect operation or careless handling.
- Damage to the product due to natural disasters.
- Presence of elements indicating mechanical damage (fall, hit).
- Disability of connected devices of other producers.
Manufacturer : Guangdong Yinku Furniture Co., Ltd
Address: 402, No. 10, North Industrial Zone, Liangcun, Lecong Town,
Shunde District, Foshan City,
Guangdong Province, China. Made in China.
IMPORTER in EU/Importer / Dovozce / Dovozca / Maahantuoja /
Importör/Importatorul/
Importeur. Defender Technology OÜ, Betooni str 11, 11415, Tallinn,
Estonia.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>