Dual DV737MB AV DVD Receiver User Guide

Dual DV737MB AV DVD Receiver User Guide

Installation

TYPICAL FRONT-LOAD DIN MOUNTING METHOD

Copyright and Trademark Notes

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macro vision corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macro vision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. DVD Logo is a trademark of DVD Format/ Logo Licensing Corporation registered in the U.S., Japan and other countries. SD Logo is a trademark of SD 3C, LLC. iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. Dual Electronics Corporation is not affiliated with Apple, Inc. Other trademarks and trade names are those of their respective owners.

Wiring Diagram

Front Panel Controls

1. Eject
2. Release
3. IR
4. MIC
5. USB
6. AUX In
7. Mute/End call
8. Tune/Previous Track/Back
9. Volume Up/Down
10. Mode
11. Power
12. Play/Pause/Band
13. Open
14. Tune/Next Track/Forward
15. Talk

Remote Controls

1. Power & Mode
2. Talk
3. Adjust angle
4. Setup
5. Subtitle & Local/Dx(Distant)
6. Tune/Previous Track
7. Band
8. Title/PBC (Push Button Configuration) &AS/PS(Automatic Memory stroring & Preset Scanning)
9. Back
10. Volume Up/Down
11. Menu & Subwoofer
12. Angle & Zoom
13. Audio & Mo(Mono) /ST(Stereo)
14. Power & Mode
15. Talk
16. Adjust angle
17. Setup
18. Subtitle & Local/Dx(Distant)
19. Tune/Previous Track
20. Band
21. Title/PBC (Push Button Configuration) &AS/PS(Automatic Memory stroring & Preset Scanning)
22. Back
23. Volume Up/Down
24. Menu & Subwoofer
25. Angle & Zoom
26. Audio & Mo(Mono) /ST(Stereo)

Main Menu

In the Main Menu screen, press the desired icon to enter each of the following settings : Radio, Disc (CD/DVD), USB, SD Card, Bluetooth Phone, Bluetooth Music, Dual Mirror, Rearview Camera, Aux In, AV In, Setup

Setup Operations

In the Main Menu, press Setup icon to enter the general settings for the device

1. General(Animation, Key Beep, Disc, Radio,….)
2. Time(Adjust Time and Time format)
3. Video(Adjust Color, Brightness, Contrast, Tint)
4. Language(Select Language)
5. RGB Illumination(Backlight and Buttons color)
6. Calibration(TFT Calibration)

Radio Operations

Press MODE button on the Control Panel until Tuner is selected

1. Home
2. Information Display
3. Tune Up
4. Preset Station Display
5. Next Menu
6. BAND
7. AS/PS(Automatic Memory Storing & Preset Scanning)
8. Audio Setup
9. Mute
10. Previous Menu
11. Tune Down
12. Local/Dx(Distant)
13. TILT Angle Up
14. TILT Angle Down
15. PTY(Program type)

DVD Operations

Insert a DVD in the disc slot for DVD playback(please see ‘Safety Notes’ on the front page of this guide)

1. Mute
2. Previous Track
3. Play/Pause
4. Next Track
5. Back
6. Forward
7. Next Menu
8. Repeat Play
9. Random Play
10. TILT Angle Up
11. TILT Angle Down
12. Talk
13. TA(Traffic Announcement)
14. AF(Alterative Frequencies)
15. Previous Menu

DISC Operations

Inserting the MP3 CD into the disc slot will make the unit automatically read the CD.

1. Previous Menu
2. Mute
3. Audio Setup
4. Back
5. Forward
6. Next Menu

Audio Settings

Audio EQ Presets

USER -> JAZZ -> CLASSIC -> POP
ROCK -> BEAT -> FLAT

USER PRESET

6 EQ Band frequencies are adjustable from the ASP settings.

ASP menu adjust the Bass/Mid/Treb center frequencies. Each band adjusts the center
frequency average(Low/Mid/High).

Bass/Mid/Treb Q Value adjust the frequency width, wide to narrow.

Loudness center frequency(Flat, 400, 800, 2400)
Subwoofer center frequency(Flat, 80, 120, 160)

FADER/BALANCE

FAD (F10 to R10) : Fader adjusts the front-to-rear audio strength
BAL (L10 to R10) : Balance adjusts the left-to-right audio strength

SUB/LOUD

SUB: Adjusts the subwoofer volume levels.
LOUD(Off/Low/High): Loudness feature provides better overall sound at low volume levels by increasing low and high frequencies

Bluetooth Operations

Bluetooth Microphone

The microphone is built-in to the receiver

Pairing and Connecting

Before using a Bluetooth device with this unit, the device must be paired and connected. The Bluetooth signal of the unit will broadcast when the power is on. Complete the pairing sequence from your Bluetooth device. The Dual unit will be displayed as “Dual BT”. When prompted, enter the passcode “0000”. On your device. Once paired, the Bluetooth device should automatically connect this unit whenever the unit is in range.

Dialing a Number

Press to display keypad and dial a number.

Making and Ending a Call

Press to make a call, and press to end a call.

Accessing Recent Call List

Press to view the Dialed
Press to view the Received
Press to view the Missed

Transfering Audio

Press to transfer audio between the head unit and mobile phone.

Streaming Audio

Press to enter the music control menu.
Press to play or pause the music.
Press to skip to the previous track.
Press to advance to the next track.

2-Way Dual Mirror Operation

See insert for Dual Mirror operation.

Steering Wheel Control(SWC) Operation

Steering Wheel Control Programming See insert for SWC Programming operation

One-Year Limited Warranty

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.
Dual Electronics Corp. agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period.
Who is covered? This warranty is extended to the original retail purchaser for products purchased from an authorized Dual dealer and used in the U.S.A.
What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.dualav.com.

What to do?

1. Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.
2. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.
3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.
4. For more information and for the location of the nearest authorized service center please contact us by one of the following methods:
   Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damage.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

www.dualav.com

©2017 Dual Electronics Corp.
NSC0117-V01
Printed in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>