Uuoeebb B0CDFTQGD9 4 in 1 Baby Bassinet Bedside Sleeper Instruction Manual

June 17, 2024
Uuoeebb

Uuoeebb B0CDFTQGD9 4 in 1 Baby Bassinet Bedside Sleeper

Uuoeebb-B0CDFTQGD9-4-in-1-Baby-Bassinet-Bedside-Sleeper-
prodcut

Assembly Instructions

  1. Lift one stand.

  2. Place it on the floor.Uuoeebb-B0CDFTQGD9-4-in-1-Baby-Bassinet-Bedside-Sleeper-fig-1

  3. Repeat steps 1 & 2 for the other side.

  4. Install the supporting frame.Uuoeebb-B0CDFTQGD9-4-in-1-Baby-Bassinet-Bedside-Sleeper-fig-2

  5. Make sure the bracket is fully inserted on both sides.

  6. Secure velcro straps onto the frame.Uuoeebb-B0CDFTQGD9-4-in-1-Baby-Bassinet-Bedside-Sleeper-fig-3

  7. Pass the bracket through the storage basket

  8. Bracket snap alignment installed downUuoeebb-B0CDFTQGD9-4-in-1-Baby-Bassinet-Bedside-Sleeper-fig-4

  9. The left and right installation methods are the same

  10. Adjust the height of the Bedside by pulling and holding the adjusters up.
    This concludes the installation of the Baby Bassinet. For instructions on the Bedside sleeper, Rocker function, and Diaper Changing Station, please refer to the next page.Uuoeebb-B0CDFTQGD9-4-in-1-Baby-Bassinet-Bedside-Sleeper-
fig-5 Bedside Sleeper Function

  11. Unbuckle the button.

  12. Unzip to open one side. Repeat steps 11 & 12 for the other side.Uuoeebb-B0CDFTQGD9-4-in-1-Baby-Bassinet-Bedside-Sleeper-fig-6

  13. Lift upwards to detach the bar.

  14. Secure the bar using the elastic straps.Uuoeebb-B0CDFTQGD9-4-in-1-Baby-Bassinet-Bedside-Sleeper-fig-7

  15. Rotate the wheels by pressing and holding the round button.

  16. Change modes depending on usage.Uuoeebb-B0CDFTQGD9-4-in-1-Baby-Bassinet-Bedside-Sleeper-fig-8

Diaper Changing Station

  1. The iron pipe is inserted into the plastic piece
  2. Make sure the spring bead pops out
  3. Metal frame assembledUuoeebb-B0CDFTQGD9-4-in-1-Baby-Bassinet-Bedside-Sleeper-fig-9
  4. Lay the cushion flat on the metal frame
  5. Fasten the safety belt
  6. Diaper table assembly completedUuoeebb-B0CDFTQGD9-4-in-1-Baby-Bassinet-Bedside-Sleeper-fig-10

Welcome to UUOEEBB family

Let’s get SEALIOUS!
If you like our product, we would love to hear your honest feedback and review. Customer satisfaction is our No.1 priority. If for any reason anything is missing, incorrect, or different from your expectation, please contact us first at uuoeebb_ [email protected].We will resolve your issue within 24 hours, guaranteed!

IMPORTANT- Keep for reference – Read carefully
Please read this manual before assembling and using this product, it will tell you the correct operation method and assembly procedure, to avoid damage to the product or injury to your baby due to an incorrect operation method.

  1. Watch out for open fire or other strong heat sources near the product.

  2. Please check regularly during use. If you need to replace spare parts.
    please contact us at uuoeebb_ [email protected]. Do not use other substitute parts.

  3. Do not leave the baby unattended.

  4. Do not place this product near windows.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Uuoeebb User Manuals

Related Manuals