KAMAL 52260726 Entryway Shelf Instruction Manual
- June 17, 2024
- KAMAL
Table of Contents
KAMAL 52260726 Entryway Shelf Instruction Manual
TOOLS REQUIRED BUT NOT INCLUDED:
2 Phillips head screwdriver Pencil
WARNINGS:
Do not throw away packing materials and carton until after assembly. Assemble
all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place overheat or air conditioning vents.
Blot spills do not rub, with a clean white cloth. Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
PARTS INCLUDED
STEP 1
Use the measurements in the graphic below to mark the location of the shelf
mounting hardware on your wall. If you
are hanging the shelf (C) on drywall, pre-drill for the wall anchors (B) at
the marked locations and then insert them
into the wall. Insert screws (A) into the wall anchors (B) and tighten,
leaving about 1/4″ of screw extending out from
the wall surface. If drilling into a stud, drill screws (A) directly into the
wall at the marked location, leaving about 1/4″ of extending out from the wall
surface. Once screws (A) are secured on the wall, hang the shelf (C) onto the
screws (A).
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright,
design and patent rights. Any unauthorized reproduction, adaptation,
distribution or other infringement will be
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>