Lotoo PAW 5000 MKII Portable Hi-Fi Music Player User Guide

Lotoo PAW 5000 MKII Portable Hi-Fi Music Player

Package content

• The package includes the following accessories (The quantity for each accessory is one).
• Please carefully verify when purchasing. If anything is absent, please contact the device supplier timely.
• Notes: Lotoo’s official website supplies an electronic version of the User Manual book and a fast setup.
• Please visit www.lotoo.cn. and download it.

Key functions

Notes: the buttons of (13) (14) (15), the short press will show you the left functions of buttons, long press will show you the right functions of buttons.

Install the TF card

1. Inserting the TF card（As shown in figure1）
   • Insert the TF card into the slot according to the shell logo direction, push to hear a “beep” sound, and release. Then the TF Card is installed.
2. Pull out the TF card（As shown in figure 2）
   • Gently push the TF card bottom to hear the “Di” sound, then slowly let go. You can see the TF Card pops up about 3mm. then you can directly take the card.

Notes:

1. The device will turn on normally when the TF card is inserted. The device itself hasn’t memory capacity.
2. Theoretically, the device can support a TF card with a 2T capacity maximum.
3. The device can support the TF card with FAT32/ exFAT format. So we advise: When inserting the TF card, please format it first before use.
4. When inserting or pulling out the TF card, please be gentle, otherwise it may cause damage to the TF card.
5. You can place four TF cards into the moving arm belt’s bracket. Please follow the directions for identification.

Power

1. Power on
   • When powered off, long press “POWER” to turn on the device.
   • When powered on, short press “POWER” to activate or turn off the screen. When the screen is turned off, you can only operate the “POWER”, ”Volume+”, and ”Volume-” button.
   • Advice: when you play music for a long time, please turn off the screen to improve this player’s endurance performance.
2. Power off
3. The player is turned on and the screen is lighted, long press “POWER”. And it will turn off.
4. The player is turned on and the screen is out, firstly press “POWER” to activate the screen. Then long press “POWER”, and you can turn off the device.
5. Recharge
   • This device will recharge automatically when connected to a 220V power supply with the power adapter.
   • When the player is off, long press to turn on the device.
   • Playing while charging: The externally connected power adapter can supply power to the device while charging the Lithium battery.
   • Therefore, you can choose to play music when charging the Lithium battery, which does not influence the charging performance.
   • Notes: you need to buy the power adapter separately.

Firmware update

1. To update, please make sure that the battery is higher than 15%. If not, please charge it first;
2. Please visit the Lotoo official website www.lotoo.cn, and enter the download page. Download the latest firmware, and copy the “PAW5KMK2.COE” file inside the compressed package to the root of the TF card;
3. Enter the settings, click【Menu>System settings>System update】. Then wait for the completion of the update The correct update will perform the following process:
4. After the correct update, the machine will turn off automatically. turn it on again, you can check the latest software version number at at【Menu>System settings >System information】.

Assembly

Assembly of arm belt for sport

1. As shown below, let the arm belt’s large area of Velcro side outwards, penetrating from the left side, penetrating from the right side;
2. As shown below, pull out the arm belt (from the right side) to the nylon hasp loop side and show the bracket’s right side. Then arrange the arm belt below the bracket;
3. Please insert obliquely this device’s bottom into the end of the bracket. Snap two card hooks below the bracket into the groove of the device’s bottom. Then snap the upper end of this device into a card hook.
   • Notes: This device will be damaged if you place it in the bracket. Please take the device off from the bracket when you don’t use the sports arm belt.

Bluetooth

1. Long press to enter into SETUP menu, then click【System settings>Bluetooth settings】as shown in Figure 1;
2. Select【Bluetooth switch】, press【OK】 and set it to【ON】, as shown in Figure 2, 3;
3. Short press to back to the previous menu, enter into【List of Bluetooth 】, as shown in Figure 4;
4. Power on your Bluetooth headphones or speaker, and activate the pairing mode. Select 【scan for new device】on PAW 5000, as shown in Figure 5, 6;
5. When you see the name of your device, press【OK】to stop the scanning, or wait till the scanning finishes after some seconds, as shown in Figure 7;
6. Select the device name and press 【OK】 to connect, as shown in Figure 8, 9;
7. When it shows ”connected” at the right of the device. The connection is done, as shown in Figure 10.
8. When the connection is completed, you can enjoy your music with Bluetooth.

Notes

1. Devices safety operations
   • Please do not disassemble the device. Otherwise, it may cause damage to the device.
   • Please do not use this device in the lightning weather. Otherwise, it may bring you some harm.
   • Please do not use the device in heavy dust or smoke areas. Otherwise, it may cause damage or malfunction.
   • Please do not beat this device and its accessories. Otherwise, it may cause serious damage or malfunction.
   • Please do not clean this device with Chemical solvents or detergents. Otherwise, it may cause damage.
   • Please do not let this device close to strong magnetic material. Otherwise, it may cause serious damage or malfunction.
   • Please do not place heavy things on the device. Otherwise, it may cause damage or malfunction.
   • Please use this device in an excessively moist environment. Otherwise, it may cause damage to the circus.
2. Battery safety operations
   • Please do not place the battery in fire or heat the battery. Otherwise, the battery may explode.
   • If there is a high-temperature heating phenomenon on the battery, please stop using it immediately.
   • Risk of explosion if the battery is replaced by an incorrect type.
   • Dispose of used batteries according to the instructions. Otherwise it may bring you damage.
3. Volume safety operations
   • To prevent possible hearing damage. Do not listen at high volume levels for long periods.
   • Fully understand the user manual before use.
   • Ensure your player is at low volume levels or powered off before.

FCC Statement

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Name: Digital Audio Player
• Model: PAW 5000 MK II
• Input voltage and current: 5V — , 1A
• Manufactory: Beijing Infomedia Electronic Technology Co., Ltd.
• Operation condition: Altitude up to 2000m, Nontropical climate
• CMIIT ID: 2015DP4402
• Floor 4, B Building, Printing Academy, No. 2 Cuiwei Road,
• Haidian District, Beijing, China.
• Customer Service Tel: +86 4006538168
• Lotoo Website : www.lotoo.cn.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>