E D FURNITURE Nursery Rocking Chair Instruction Manual
- June 17, 2024
- E D FURNITURE
Table of Contents
E D FURNITURE Nursery Rocking Chair
ROCKING CHAIR Assembly Instructions
Accessories List
| Component | Quantity |
|---|---|
| Backrest | x 1 |
| Seat | x 1 |
| Cushion | x 1 |
| Screw: M6*80mm | x 1 |
| Screws: M8*60mm | x 6 |
| Spring spacer | x 1 |
| Nut | x 2 |
| Stickers | x 2 |
| Spacers | x 5 |
| Spanner | x 1 |
| Legs | x 2 |
| Support rod | x 1 |
STEP 1: INSTALLING THE BACKREST
- Align the side slide and insert the backrest slide into the seat slide 10%.
- Align and insert the other side slide into the cushion slide.
- Fully insert the backrest into the seat and make sure it is tight.
Specifications
| Step | Action | Details |
|---|---|---|
| STEP 2 | Unzip the bottom zip and screw in the M6*80mm bolts with spacers, | |
| making sure they are 100% tight. | Image shows a zipper being unzipped and |
screws being tightened.
STEP 3| Place the seat legs on the bottom and screw in the 4 M860mm bolts
with spacers to secure them.| Image depicts legs being attached to the seat
bottom with bolts.
STEP 4| Align the support rods with the holes and attach them to the chair
legs.| Support rods are shown being aligned and attached to the chair legs.
STEP 5| Put the nut into the bottom hole, pay attention to the direction of
the nut hole, and then screw the M860 screw into the hole from the side of
the chair foot.| A hand is shown putting a nut into a hole and a screw being
tightened into it.
STEP 6| Tighten all the screws 100%, and put stickers on the holes for the
side of the chair feet.| Shows the tightening of screws and application of
stickers to cover the holes.
STEP 7| Turn the chair back over, put the cushions on and enjoy your leisure
time.| The finished chair is shown upright with cushions placed on it.
FAQ
- What tools are required for assembly?
- A spanner is included in the accessories for assembly.
- How do I ensure the chair is assembled correctly?
- Make sure all screws are tightened 100% and follow the instructions carefully, especially the correct orientation of parts.
- Can I replace a part if it’s missing or defective?
- Check the accessories list to ensure all parts are included and contact the manufacturer for replacement parts if necessary.
Accessories list
- STEP 1: INSTALLING THE BACKREST
- Align the side slide and insert the backrest slide into the seat slide 10%.
- Align and insert the other side slide into the cushion slide.
- Fully insert the backrest into the seat and make sure it is tight.
- STEP2: Unzip the bottom zip and screw in the M6+80mm bolts with spacers, making sure they are 100% tight.
- STEP3: Place the seat legs on the bottom and screw in the 4 M8+60mm bolts with spacers to secure them.
- STEP4: Align the support rods with the holes and attach them to the chair legs.
- STEP5: Put the nut into the bottom hole, pay attention to the direction of the nut hole and then screw the M8+60 screw into the hole from the side of the chair foot.
- STEP6: Tighten all the screws 100%, and put stickers on the holes for the side of the chair feet.
- STEP 7: Turn the chair back over, put the cushions on and enjoy your leisure time.
