FRANKLIN 58319 Wooden Dolly Owner’s Manual
- June 17, 2024
- FRANKLIN
Table of Contents
FRANKLIN 58319 Wooden Dolly
Introduction
Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Specifications
| Length | 27-1/2″ – 38-1/4″ |
|---|---|
| Towing Capacity | 660 lb. |
IMPORTANT SAFETY INFORMATION
Assembly Precautions
- Only mount on rectangular, wooden dolly that has at least four casters.
- Both adjustment bolts must engage with both handle pieces.
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep assembly area clean and well lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- Weight capacity and other product capabilities apply to properly and completely assembled product only.
- Make sure the Handle is securely connected to the wooden dolly before attempting to use dolly.
Use Precautions
-
This product is not a toy. Do not allow children to play with or near this item.
-
Use as intended only.
-
Inspect before every use; do not use if parts are loose or damaged.
-
Do not exceed listed weight capacity.
Be aware of dynamic loading!
Sudden load movement may briefly create excess load causing product failure. -
Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
- Position the Handle in the middle of the wooden dolly (not included), as shown in Figure A.
- Use a small diameter drill bit (smaller than the screws) to drill four pilot holes.
- Use a Phillips Head screwdriver to thread the screw through the Handle and into the wooden dolly (not included).
- Using the installed handle, mark the spot for the Holding Bracket.
- Drill pilot holes and screw the Bracket into the wooden dolly to secure it.
Adjusting Handle Length
- Remove the Adjustment Bolts, as shown in Figure B, and move handle to desired length.
- Insert the same bolts back into the handle.
- Tighten bolts using a wrench.
Note: Both Adjustment Bolts must engage with both handle pieces.
Parts List and Diagram
| Part | Description | Qty |
|---|---|---|
| 1 | Wood Screw, 1″ | 4 |
| 2 | Swivel Handle | 1 |
| 3 | Holding Bracket | 1 |
| 4 | Screw for Holding Bracket | 2 |
| 5 | Adjustment Bolt | 2 |
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase
instead.
Note: Some parts are listed and shown for illustration purposes only, and
are not available individually as replacement parts.
Specify UPC 193175522788 when ordering parts.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us
with transportation charges prepaid. Proof of purchase date and an explanation
of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the
product at our election or we may elect to refund the purchase price if we
cannot readily and quickly provide you with a replacement. We will return
repaired products at our expense, but if we determine there is no defect, or
that the defect resulted from causes not within the scope of our warranty,
then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
CUSTOMER SUPPORT
When unpacking, make sure that the product is intact and undamaged. If any
parts are missing or broken, please call
1-888-866-5797 as soon as possible.
Copyright© 2023 by Harbor Freight Tools®. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools. Diagrams
within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described
herein. Tools required for assembly and service may not be included.
Visit our website at : http://www.harborfreight.com
Email our technical support at :
productsupport@harborfreight.com
26677 Agoura Road • Calabasas, CA 91302 •
1-888-866-5797
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>