Heelay KW-CS01 Dehumidifier for Bedroom User Manual
- June 17, 2024
- Heelay
Table of Contents
Heelay KW-CS01 Dehumidifier for Bedroom
PRECAUTIONS
The appliance is used indoors excluding laundry rooms.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- The appliance is only to be used with the power supply unit provided with the appliance.
- If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
- Do not use this machine in an environment with high temperatures and oily. flammable and explosive gas.
- Do not disassemble the machine at will, and do not use metal appliances or conductive objects to penetrate into the machine body.
- The power supply voltage must conform to the power supply voltage 100-240V-, specified by the machine, otherwise, the machine will be damaged.
- Please do not touch any part of the machine during work. If you need to pull out the power plug, please turn off the power first and then pull out the power plug.
- Strictly dismantle or reform this product by yourself, and the company will not be responsible for all consequences caused by dismantling or reforming the machine by yourself.
- Please make sure that the water tank is installed in place when you start the work. Please do not use the machine without the water tank. The accumulated water will spill on the ground or other places and cause unnecessary damage.
- The ambient temperature is too low, if it is lower than 15C, the condensate of the dehumidifier will freeze and frost. At this time, just shut down and stop working, and the machine will not be affected. Generally, dehumidification is not required in low-temperature environments.
PRODUCT INTRODUCTION
Thank you for choosing and using our company’s dehumidifier products!
Please read the manual carefully before use, and keep this manual proper If
you forward this product, please forward the manual along with it. Product
upgrades and specifications are subject to update without notice. If the
appearance of the product, color, and function are different from the actual
product, please refer to the actual product.
PRODUCT SPECIFICATION
FUNCTION WIRING DIAGRAM
MAIN PARTS
INSTRUCTIONS
Connect the power supply
Connect one end of the power cord to the interface on the back of the machine.
and the other end to the power socket, that is, the machine enters the standby
state. (Figure 1)
On/Off and ambient light status (Figure 2)
[Working Mode l In the standby state, press the power button switch, the
machine starts, the power indicator light is on; the ambient light, the
default colorful gradient mode.
[Ambient light switch] In the working state, click the ambient light button to cycle through the “fixed-color off-gradual change” mode.
[Shutdown]
In the working state, press the power button once, the machine stops working,
and the ambient light is off.
Notice
In the working state of the machine, pressing the ambient light button does
not affect the operation of the fan and dehumidification module. In the
standby state of the machine, pressing the ambient light button is invalid.
Water tank full alarm mode
- When the machine stops working, the atmosphere light flashes red and the indicator light flashes white, indicating that the water tank is full. User have to take out the water tank to clean it.
- When the water tank is taken out, the indicator light and atmosphere light are off, and the machine will shut down automatically.
- When the empty water tank is put back into the machine, press the power switch button again before the machine starts working again.
(Water tank removal and installation instructions)
Hold the two sides of the water tank with the four fingers of both hands.
press the upper shell with your thumbs up, and lift the water tank out with
gentle force. After the stagnant water has been cleaned up, the middle card
position at the bottom of the water tank is aligned with the card slot of the
fuselage and pushed inward to the end, the installation is complete.
MAINTENANCE
Notice
Before cleaning and maintaining the dehumidifier, please cut off the power
Body cleaning
- It is forbidden to rinse the body directly with water. You can wipe it lightly with a soft cloth containing a little neutral detergent, and then wipe it dry.
- After cleaning and maintenance, be sure to wait until it is fully dry before it can be powered on or stored.
- When not in use for a long time, please unplug the power cord. It is recommended to wrap it in the original packaging and store it in a dry place.
Filter cleaning
Wash the nier to watt, or use a va am deaner or a dry brush to clean
Warranty
Heelay provides the product with a lifetime warranty from the date of
purchase. The warranty does not cover improper use of the product, such as
dismantling the product by yourself. The warranty also does not cover products
purchased from other unauthorized sellers. Contact Us Email: services-
heelay@outlook.com
TROUBLESHOOTING
With condensation sheet defrosting fundion: When the ambient temperature is lower than 15 C, the condensation sheet will frost. At this time, the machine will turn on the defrosting function and de-frost regularly to ensure that the machine retains the normal dehumidification function. If the environment is lower than 0 C, the defrosting function of the machine will be invalid.