LYNK PROFESSIONAL 421121DS Roll Out Wood Drawers Installation Guide
- June 17, 2024
- LYNK PROFESSIONAL
Table of Contents
LYNK PROFESSIONAL 421121DS Roll Out Wood Drawers
Installation Guide
-
Unpack
-
Align Wood At Front of Drawer
-
Attach Wood Front
Using #1 small wood screws and brackets -
Align Glide Frame
As shown using alignment guide found in parts bag -
Check Cabinet Clearance
Set drawer onto glide frame with holes in drawer and glide aligned
Check for adequate cabinet and door clearance
Adjust glide frame position if needed -
Mount Glide Frame
Remove drawer from glide frame
Move inner glide rails slightly forward as shown
Mount glide frame into cabinet using #2 large wood screws found in parts bag -
Attach Drawer
Set drawer onto glide frame with drawer and glide mounting holes aligned -
Insert Wood Floor
LIFETIME LIMITED WARRANTY AND DISCLAIMER OF LIABILITY
Lynk® will, for the life of the product, at its option, repair or replace, free of charge, any part of the equipment that is defective in material or workmanship or both, providing that installation and use of the equipment complies with the instructions in the instruction manual. For warranty service, please call Lynk® at 1.800.733.5965 or email [email protected]. This warranty does not cover damage due to misuse, abuse or normal wear and tear, and seller shall have the right to request that the product be shipped for inspection at buyer’s expense. THERE ARE NO OTHER EXPRESS WARRANTIES OR IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE ABOVE WARRANTY IS LIMITED TO THE ORIGINAL PURCHASER.
ANY AND ALL IMPLIED WARRANTIES ARE EXCLUDED AND LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS EXCLUDED TO THE EXTENT EXCLUSION IS PERMITTED BY LAW. BUYER’S SOLE REMEDY IS THE LIMITED WARRANTY STATED ABOVE. DEPENDING ON THE LAW OF THE STATE WHERE YOU LIVE, THIS EXCLUSION OF ALL IMPLIED WARRANTIES AND OF INCIDENTAL AND CONSEQUENTIAL DAMAGES MAY NOT APPLY TO YOU.