Pimax Crystal Connect To PC VR Headset User Guide

June 17, 2024
Pimax

Pimax Crystal logo

Pimax Crystal Connect To PC VR Headset

PC Performance Requirements

Pimax Crystal Connect To PC VR Headset 8

Before connecting to the PC, make sure the controllers and headset are charged.

Pimax Crystal Connect To PC VR Headset 1

Connect To PC

  1. Download and install Pimax_Play https://pimax.com/download-pcvr-crystal/
  2. Start Pimax Play
  3. Connect the power adapter to the USB-HUB.
  4. Connect the two USB plugs to the USB-HUB, then the DP cable into your PC.
  5. Connect the USB-HUB to your PC using the USB cable included with the hub.Pimax Crystal Connect To PC VR Headset 2
  6. Turn on the crystal. Hold the Power button X until the battery glows blue and the Pimax logo appears in the glasses.Pimax Crystal Connect To PC VR Headset 3
  7. Connect the DP cable to your headset You should hear a clicking sound to confirm that it has been properly connected.Pimax Crystal Connect To PC VR Headset 4
  8. If the Crystal are not recognized and there is no connection to the computer, try to connect without the USB HUB.
    To do this, connect the USB A 2.0 and 3.0 directly to your computer.

Pimax Crystal Connect To PC VR Headset 5

New Controller Pairing

(Left And Right Controller Need To Be Paired Separately)

  1. Powering on the Controllers
    Press and hold then Button for 2 seconds (blue light/green light always onPimax Crystal Connect To PC VR Headset 6

  2. Click SET PAIR in the Pimax Play, then press and hold A+ B/X+Y until the controller’s indicator light begins flashing blue.

  3. According to the prompt, and then click PAIR in the Pimax Play.

    • The pairing of controllers needs to be done individually one by one.
    • During the pairing process, it is necessary to ensure that the headset is not in sleep mode.
  4. Wait for the controller’s green indicator light to come on.
    Once the light comes on the Pimax Play will that the controllers have been paired and the UI should show the controller graphic illuminated in the color green.

How To Adjust The Headset For A Comfortable Fit And View

  1. Adjust the strap dial located on the back of the main strap to tighten or loosen the fit.

  2. Fine-tune the top headstrap to adjust the headset’s vertical position on your face.

  3. Fine-tune the length and position of the straps until you are comfortable with the fit and visual experience.

  4. The Auto IPD feature will adjust the IPD to the appropriate position.
    You can also adjust the IPD in the “device settings ➔ IPD” on the PimaxClient, enter the value of your IPD, and click “setting” to adjust the IPD to the appropriate position;

  5. Press the headband down to the back of the head and tighten the strap dial.

  6. Adjust the head strap to reduce pressure on the forehead.

Pimax Crystal Connect To PC VR Headset 7

Problem solutions and detailed instructions

For further instructions and troubleshooting, check out here.
https://pimax.com/crysta1-evaluation-journey/

Sof tware Eye Tracking user Guide

Auto IPD Use Guide
Crystal 120Hz User Gu·de
Stand-Alone User Guide
Hardware| Lighthouse User Guide

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals