Pimax Crystal Highest Pixel VR Headset User Guide
- June 12, 2024
- Pimax
Table of Contents
Pimax Crystal Highest Pixel VR Headset User Guide
Official Website: http://pimax.com
Connect To PC
- Connect the power adapter to the USB-HUB.
- Connect the two USB plugs to the USB-HUB, then the DP cable into your PC.
- Connect the USB-HUB to your PC using the USB cable included with the hub.
- Connect the DP cable to your headset.
Battery Installation/Replacement
Battery Installation
Hold the buttons on both sides of the battery, and then push the battery
upwards into the battery holder.
Battery Replacement
Start by releasing the latch on one side, and then release the latch on the
other side while tugging gently one side at a time.
Youtube:
https://youtu.be/pQs9TyS3LZE
How To Hot-Swap The Battery
- Hot-swap the battery only when the device is in low-power mode.
- Press the power button to turn off the screen and wait for the blue light at the battery compartment, located at the back of the headset, to turn off.
- Replace the battery within 1 minute.
PC / AIO Mode
To switch between ‘PC’ mode and ‘AIO’ mode (Standalone), locate the toggle switch and adjust it accordingly..
Reminder : If the device is turned on, the headset will automatically restart if you switch modes.
Lenses Removal
Lenses Installation
Pimax Client Software
For guidance on how to pair your Crystal with your computer, follow the instructions within the software.
Software Features
- Store – Offers a range of paid and free games and applications.
- Device pairing – Account management, WiFi and screen mirroring settings.
- Product manual and introduction
- After-sales service link
For more guidance, please:
pimax.com/support
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>